과제정보
This research was supported by Kumoh National Institute of Technology(2019-104-064).
참고문헌
- Shoemaker, J., Moldflow Design Guide: A Resource for Plastics Engineers, Hanser Gardner Publications, Inc., pp. 173-190, 2006.
- Kazmer, D. O., Injection Mold Design Engineering, Hanser Gardner Publications Inc., pp. 252-257, 2007.
- Lee, B. H. and Kim, B. H., "Variation of Part Wall Thicknesses to Reduce Warpage of Injection-Molded Parts based on the Modified Complex Method," Polymer-Plastics Technology and Engineering, Vol. 36, No. 5, pp. 791-807, 1997. https://doi.org/10.1080/03602559708000661
- Yao, D., "Direct Search-Based Automatic Minimization of Warpage And Weldlines in Injection Molded Parts," A Thesis for a Master, University of Massachusetts, pp. 1-135, 1998.
- Ni, S., "Reducing Shrinkage and Warpage for Printer Parts by Injection Molding Simulation Analysis," Journal of Injection Molding Technology, Vol. 6 No. 3, pp. 177-186, 2002.
- Erzurumlu, T. and Ozcelik, B., "Minimization of Warpage and Sink Index in Injection-Molded Thermoplastic Parts Using Taguchi Optimization Method," Materials and Design, Vol. 27, pp. 853-861, 2006. https://doi.org/10.1016/j.matdes.2005.03.017
- Guo, W., Hua, L., Mao, H. and Meng, Z., "Prediction of Warpage in Plastic Injection Molding based on Design of Experiments," Journal of Mechanical Science and Technology, Vol. 26, No. 4, pp. 1133-1139, 2012. https://doi.org/10.1007/s12206-012-0214-0
- Kim, K. M. and Park, J. C., "Minimization of Warpage of Injection Molded Parts Using Dynamic Robust Design," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 14, No. 1, pp. 44-50, 2015.
- Kim, K. M. and Park, J. C., "Robust Design of an Injection Molding Process Considering Integrated Desirability," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 10, pp. 34-41, 2019.
- Fowlkes, W. Y. and Creveling, C. M., Engineering Methods for Robust Product Design: Using Taguchi Methods in Technology and Product Development, Addison-Wesley Publishing Company, pp. 129-130, 1995.
- Shin, N. H., Oh, H. S. and Kang, S. G., The Optimization of Injection Molding Process by CAE, Daekwangseorim, Seoul, pp. 327-422, 2010.