DOI QR코드

DOI QR Code

Experimental study on lateral behavior of precast wide beam-column joints

  • Kim, Jae Hyun (Department of Architectural Engineering, University of Seoul) ;
  • Jang, Beom Soo (Department of Structural Design, Dream Structural Engineering Co.) ;
  • Choi, Seung-Ho (Department of Architectural Engineering, University of Seoul) ;
  • Lee, Yoon Jung (Department of Architectural Engineering and the Smart City Interdisciplinary Major Program, University of Seoul) ;
  • Jeong, Ho Seong (Department of Architectural Engineering and the Smart City Interdisciplinary Major Program, University of Seoul) ;
  • Kim, Kang Su (Department of Architectural Engineering and the Smart City Interdisciplinary Major Program, University of Seoul)
  • 투고 : 2021.08.02
  • 심사 : 2021.11.10
  • 발행 : 2021.12.25

초록

In this study, cyclic loading tests were conducted on the precast concrete (PC) wide beam (WB)-column joints. Two beam-column joint specimens were fabricated with the arrangement and anchorage details of the reinforcing bars penetrating the beam and column as variables. Through a cyclic loading test, the lateral load-story drift ratio responses, seismic performance characteristics (e.g., ductility, overstrength factor), energy dissipation, strength and stiffness degradations of each specimen were compared and analyzed based on the various indices and the current structural codes (ACI 318-19 and ACI 374.1-05 report). In addition, the shear lag effect was confirmed through the gauge values of the PC beam, and the differences in seismic performance between the specimens were identified on that basis.

키워드

과제정보

This work was financially supported by Korea Ministry of Land, Infrastructure and Transport(MOLIT) as [Innovative Talent Education Program for Smart City]. Also, the first and second authors would like to acknowledge that this research was supported by the DL Construction Co., Ltd.

참고문헌

  1. ACI Committee 318 (2019), Building Code Requirements for Structural Concrete and Commentary (ACI 318-19), American Concrete Institute, Farmington Hills, MI.
  2. ACI Committee 374 (2005), Acceptance Criteria for Moment Frames Based on Structural Testing and Commentary (ACI 374.1-05), American Concrete Institute, Farmington Hills, MI.
  3. ACI Committee 374 (2013), Guide for Testing Reinforced Concrete Structural Elements under Slowly Applied Simulated Seismic Loads (ACI 374.2R-13), American Concrete Institute, Farmington Hills, MI.
  4. Al-Osta, M.A., Khan, M.I., Bahraq, A.A. and Xu, S.Y. (2020), "Application of ultra-high performance fiber reinforced concrete for retrofitting the damaged exterior reinforced concrete beam-column joints", Earthq. Struct., 19(5), 361-377. https://dx.doi.org/10.12989/eas.2020.19.5.361.
  5. Catalan, A., Benavent-Climent, A. and Cahis, X. (2010), "Selection and scaling of earthquake records in assessment of structures in low-to-moderate seismicity zones", Soil Dyn. Earthq. Eng., 30, 40-49. https://doi.org/10.1016/j.soildyn.2009.09.003.
  6. Arockiasamy, M., Badve, A.P., Rao, B.V. and Reddy, D.V. (1991), "Fatigue strength of joints in a precast prestressed concrete double tee bridge", PCI J., 36, 84-99. https://doi.org/10.15554/pcij.01011991.84.97.
  7. ASCE (2010), Minimum Design Loads for Buildings and Other Structures (ASCE/SEI 7-10), American Society of Civil Engineers, Reston, VA.
  8. Behnam, H., Kuang, J.S. and Samali, B. (2018), "Parametric finite element analysis of RC wide beam-column connections", Comput. Struct., 205(1), 28-44. https://doi.org/10.1016/j.compstruc.2018.04.004.
  9. Benavent-Climent, A. (2007), "Seismic behavior of RC wide beam-column connections under dynamic loading", J. Earthq. Eng., 11(4), 493-511. https://doi.org/10.1080/13632460601064814.
  10. Chiu, C.K., Sung, H.F., Chi, K.N. and Hsiao, F.P. (2019), "Experimental quantification on the residual seismic capacity of damaged RC column members", Int. J. Concrete Struct. Mater., 13(3), 363-384. https://doi.org/10.1186/s40069-019-0361-0.
  11. Choi, S.H., Hwang, J.H., Lee, D.H., Kim, K.S., Zhang, D. and Kim, J.R. (2018), "Experimental study on RC frame structures strengthened by externally-anchored PC wall panels", Comput. Concrete, 22(4), 383-393. https://doi.org/10.4334/jkci.2015.27.4.451.
  12. Dabiri, H., Kheyoroddin, A. and Kaviani, A. (2019), "A numerical study on the seismic response of RC wide column-beam joints", Int. J. Civil Eng., 17(7), 1-20. https://doi.org/10.1007/s40999-018-0364-2.
  13. Elsouri, A.M. and Harajli, M.H. (2015), "Interior RC wide beam-narrow column joints: potential for improving seismic resistance", Eng. Struct., 99, 42-55. https://doi.org/10.1016/j.engstruct.2015.04.020.
  14. Eurocode 8 (2004), Design of Structures for Earthquake Resistance-Part 1: General, Seismic Actions, Rules for Buildings, Committee Europpen de Normailsation, Brussels.
  15. Fadwa, I., Ali, T.A., Nazih, E. and Sara, M. (2014), "Reinforced concrete wide and conventional beam-column connections subjected to lateral load", Eng. Struct., 76, 34-48. https://doi.org/10.1016/j.engstruct.2014.06.029.
  16. Gentry, R. and Wight, J.K. (1994), "Wide beam-column connections under earthquake-type loading", Earthq. Spectra, 10(4), 675-703. https://doi.org/10.1193/1.1585793.
  17. Gunasekaran, U. and Ahmed, S.M. (2014), "Experimental investigation into the seismic performance of slabs in RC frame joints", Mag. Concrete Res., 66(15), 770-788. https://doi.org/10.1680/macr.13.00329.
  18. IBC (2018), International Building Code (IBC-2018), International Code Council, Country Club Hills, U.S.A.
  19. Karayannis, G.G. and Golias, E. (2018), "Full scale tests of RC joints with minor to moderate seismic damage repaired using CFRP sheets", Earthq. Struct., 15(6), 617-627. https://doi.org/10.12989/eas.2018.15.6.617.
  20. Kim, J.H., Choi, S.H., Hwang, J.H., Jeong, H., Han, S.J. and Kim, K.S. (2021), "Experimental study on lateral behavior of posttensioned precast beam-column joints", Struct., 33(1), 841-854. https://doi.org/ 10.1016/j.istruc.2021.04.095.
  21. Kuang, J.S., Behnam, H. and Huang, Q. (2016), "Effective beam width of reinforced-concrete wide beam-column connections", Struct. Build., 1500124, 1-18. https://doi.org/10.1680/jstbu.15.00124.
  22. Kulkarni, S.A. and Li, B. (2009), "Seismic behavior of reinforced concrete interior wide-beam column joints", J. Earthq. Eng., 13, 80-99. https://doi.org/10.1080/13632460802211941.
  23. Li, B. and Kulkarni, A. (2010), "Seismic behavior of reinforced concrete exterior wide beam-column joints", J. Struct. Eng., 136(1), 26-36. https://doi.org/10.1061/(ASCE)0733-9455(2010)136:1(26).
  24. Mejia-McMaster, J.C. and Park, R. (1994), "Test on special reinforcement for the end support of hollow-core slabs", PCI J., 39, 90-105. https://doi.org/10.15554/pcij.09011994.90.105.
  25. Mirzabagheri, S., Tasnimi, A.A. and Mohammadi, M.S. (2016), "Behavior of interior RC wide and conventional beam-column roof joints under cyclic load", Eng. Struct., 111(15), 333-344. https://doi.org/10.1016/j.engstruct.2015.12.011.
  26. Moon, J.H., Choi, Y.C., Lim, J.H., Lee, L.H., Kwon, K.H. and Kim, K.S. (2007), "Post-tensioned interior precast wide beam-column connections subjected to lateral loading", Adv. Struct. Eng., 10(5), 487-500. https://doi.org/10.1260/136943307782417654.
  27. Natio, C.J., Cao, L. and Peter, W. (2009), "Precast concrete double-tee connections, part 1: tension behavior", PCI J., 54, 49-66. https://doi.org/10.15554/pcij.01012009.49.66.
  28. Nguyen, X.H., Le, D.D., Nguyen, Q.H. and Nguyen, H.Q. (2020), "Seismic performance of RCS beam-column joints using fiber reinforced concrete", Earthq. Struct., 18(5), 599-607. https://dx.doi.org/10.12989/eas.2020.18.5.599.
  29. NZS 3101 (2006), New Zealand Standard Code of Practice for the Design of Concrete Structures, Standards Association of New Zealand, Wellington.
  30. Quintero-Febres, C.G. and Wight, J.K. (2001), "Experimental study of reinforced concrete interior wide beam-column connections subjected to lateral loading", ACI Struct. J., 98(4), 572-582. https://doi.org/10.14359/10300.
  31. Rai, D.C. (2001), "Slow cyclic testing for evaluation of seismic performance of structural components", ISET J. Earthq. Tech., 38(1), 31-55.
  32. Rosenthal, I. (1978), "Full scale test of continuous prestressed hollow-core slab", PCI J., 23, 74-81. https://doi.org/10.15554/pcij.05011978.74.81.
  33. Siah, W.L., Stehle, J.S., Mendis, P. and Goldsworthy, H. (2003), "Interior wide beam connections subjected to lateral earthquake loading", Eng. Struct., 25(3), 281-291. https://doi.org/10.1016/S0141-0296(02)00150-5.
  34. Tan, K.H., Zheng, L.X. and Paramasivam, P. (1996), "Designing hollow-core slabs for continuity", PCI J., 41, 82-91. https://doi.org/10.15554/pcij.01011996.82.91.
  35. Turker, K. and Gungor, I. (2018), "Seismic performance of low and medium-rise RC buildings with wide-beam and ribbed-slab", Earthq. Struct., 15(4), 383-393. https://dx.doi.org/10.12989/eas.2018.15.4.383.
  36. Yang, Y., Yang, C., Chen, Z., Wang, N. and Yu, Y. (2018), "Experimental study on seismic behavior of RC beam-column joints retrofitted using prestressed steel strips", Earthq. Struct., 15(5), 499-511. https://dx.doi.org/10.12989/eas.2018.15.5.499.
  37. Zhang, H., Li, C., Wang, Z.F. and Zhang, C.Y. (2020), "Seismic performance assessments of precast energy dissipation shear wall structures under earthquake sequence excitations", Earthq. Struct., 18(2), 147-162. https://dx.doi.org/10.12989/eas.2020.18.2.147.