DOI QR코드

DOI QR Code

산소가 첨가된 Cr 박막의 NH3 분위기에서의 질화 처리에 의한 구조적 특성

Structural Characteristics by Nitridation of Oxygen Added Cr Thin Films in NH3 Atmosphere

  • 김단비 (한밭대학교 신소재공학과) ;
  • 김선태 (한밭대학교 신소재공학과)
  • Kim, Danbi (Department of Materials Science and Engineering, Hanbat National University) ;
  • Kim, Seontai (Department of Materials Science and Engineering, Hanbat National University)
  • 투고 : 2021.08.25
  • 심사 : 2021.11.03
  • 발행 : 2021.11.27

초록

Cr thin films with O added are deposited on sapphire substrate by DC sputtering and are nitrided in NH3 atmosphere between 300 and 900 ℃ for various times. X-ray diffraction results show that nitridation begins at 500 ℃, forming CrN and Cr2N. Cr oxides of Cr2O3 are formed at 600 ℃. And, at temperatures higher than 900 ℃, the intermediate materials of Cr2N and Cr2O3 disappear and CrN is dominant. The atomic concentration ratios of Cr and O are 77% and 23%, respectively, over the entire thickness of as-deposited Cr thin film. In the sample nitrided at 600 ℃, a CrN layer in which O is substituted with N is formed from the surface to 90 nm, and the concentrations of Cr and N in the layer are 60% and 40%, respectively. For this reason, CrN and Cr2N are distributed in the CrN region, where O is substituted with N by nitridation, and Cr oxynitrides are formed in the region below this. The nitridation process is controlled by inter-diffusion of O and N and the parabolic growth law, with activation energy of 0.69 eV.

키워드

참고문헌

  1. L. Hultman, Vacuum, 57, 1 (2000). https://doi.org/10.1016/S0042-207X(00)00143-3
  2. P. Hones, N. Martin, M. Regula and F. Levy, J. Phys. D: Appl. Phys., 36, 1023 (2003). https://doi.org/10.1088/0022-3727/36/8/313
  3. K. Liu, S. Young, S. Chang, T. Hsueh, H. Hung, S. Chen and Y. Chen, J. Alloys Compd., 511, 1 (2012). https://doi.org/10.1016/j.jallcom.2011.08.025
  4. Q. Sun and Z. Fu, Electrochem. Solid State Lett., 10, A189 (2007). https://doi.org/10.1149/1.2745087
  5. K. Ibrahim, M. M. Rahman, H. Taha, E. Mohammadpour, Z. Zhou, C. Y. Yin, A. Nikoloski and Z. T. Jiang, Appl. Surf. Sci., 440, 1001 (2018). https://doi.org/10.1016/j.apsusc.2018.01.267
  6. E. Haye, A. Achour, A. Guerra, F. Moulai, T. Hadjersi, R. Boukherroub, A. Panepinto, T. Brousse, J. J. Pireaux and S. Lucas, Electrochim. Acta, 324, 134890 (2019). https://doi.org/10.1016/j.electacta.2019.134890
  7. R. Li, Y. Cai, K. Wippermann and W. Lehnert, J. Power Sources, 434, 226718 (2019). https://doi.org/10.1016/j.jpowsour.2019.226718
  8. S. W. Russell, J. Li, T. L. Alford, P. R. Oakey and S. C. Shatas, Appl. Surf. Sci., 90, 455 (1995). https://doi.org/10.1016/0169-4332(95)00161-1
  9. J. G. Buijnsters, P. Shankar, J. Sietsma and J. J. Meulen, Mater. Sci. Eng., A341, 289 (2003).
  10. J. Kim, C. Byun and S. Kim, Korean J. Mater. Res., 24, 194 (2014). https://doi.org/10.3740/MRSK.2014.24.4.194
  11. R. T. Haasch, T. Y. Lee, D. Gall, J. E. Green and I. Petrov, Surf. Sci. Spectra, 7, 3 (2000).
  12. A. Lippitz and T. Hubert, Surf. Coat. Technol., 200, 250 (2005). https://doi.org/10.1016/j.surfcoat.2005.02.091
  13. S. Agouram, F. Bodart and G. Terwagne, Surf. Coat. Technol., 180-181, 164 (2004). https://doi.org/10.1016/j.surfcoat.2003.10.060
  14. Y. Kubo, Y. Sonohara and S. Uemura, Appl. Surf. Sci., 553, 149437 (2021). https://doi.org/10.1016/j.apsusc.2021.149437
  15. B. E. Deal and A. S. Grove, J. Appl. Phys., 36, 3770 (1965). https://doi.org/10.1063/1.1713945
  16. C. Jimrnez, J. Perrirre, C. Palacio, J. P. Enard and J. M. Albella, Thin Solid Films, 228, 247 (1993). https://doi.org/10.1016/0040-6090(93)90609-S
  17. J. Lee and S. Kim, Korean J. Mater. Res., 15, 348 (2005). https://doi.org/10.3740/MRSK.2005.15.5.348
  18. B. D. Cullity, Elements of X-ray Diffraction, 2nd ed., p. 407, Addison-Wesley, London (1978).
  19. I. Milosev, H. H. Strehblow and B. Navinsek, Surf. Coat. Technol., 74-75, 897 (1995). https://doi.org/10.1016/0257-8972(95)08360-X
  20. W. Mayr, W. Lenguer, P. Ettmayer, D. Rafaja, J. Bauer and M. Bhon, J. Phase Equil., 20, 35 (1999). https://doi.org/10.1361/105497199770335929