Steel and Composite Structures

  • 제41권5호
  • /
  • Pages.731-746
  • /
  • 2021
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Axial compression mechanical properties of steel reinforced recycled concrete column exposure to temperatures up to 800℃

  • Chen, Zongping (College of Civil Engineering and Architecture, Guangxi University) ;
  • Liang, Yuhan (College of Civil Engineering and Architecture, Guangxi University) ;
  • Mo, Linlin (College of Civil Engineering and Architecture, Guangxi University) ;
  • Ban, Maogen (College of Civil Engineering and Architecture, Guangxi University)
  • 투고 : 2021.05.31
  • 심사 : 2021.10.24
  • 발행 : 2021.12.10
⟨ 이전 논문 다음 논문 ⟩

초록

The purpose of this paper is to investigate the axial bearing capacity and residual properties of steel reinforced recycled aggregate concrete (SRC) column after elevated temperature. A total of 48 SRC columns were designed for the static loading test after elevated temperature. The variables include replacement ratios, designed temperature, target duration, thicknesses of cover concrete, steel ratios and stirrup spacing. From this test, the mass loss ratio and stress load-deformation curve were obtained, and the influence of various parameters on residual bearing capacity were analyzed. ABAQUS was used to calculate the temperature field of specimens, and then got temperature damage distribution on the cross-section concrete. It was shown that increasing of the elevated temperatures leaded to the change of concrete color from smoky-gray to grayish brown and results in reducing the bearing capacity of SRC columns. The axial damage and mechanism of SRC columns were similar to those of reinforced natural aggregate concrete columns at the same temperatures. Finally, the calculation method of axial compressive residual bearing capacity of SRC columns recycled concrete columns after high temperature was reported based on the test results and finite element analysis.

키워드

과제정보

The research described in this paper was financially supported by the Guangxi Science and Techonology Base and Talent Special Project (AD21075031), National Natural Science Foundation of China (No. 51578163), Projects funded by the central government to guide local scientific and Technological Development (GekeZY21195010), Bagui Scholar Project (2019[79]) and Innovation Project of Guangxi Graduate Education (YCBZ2021020).

참고문헌

  1. Belen G.F., Fernando M.A. and Diego C.L. and Sindy, S.P. (2011), "Stress-strain relationship in axial compression for concrete using recycled saturated coarse aggregate", Constr. Build. Mater., 25, 2335-2342. https://doi.org/10.1016/j.conbuildmat.2010.11.031.
  2. Bian, J.H. (2012), "Experimental and theoretical analysis on fire resistant performance of recycled concrete columns", Ph.D. Dissertation, Beijing University of Technology, Beijing, China.
  3. Cai, S.W. and Cai, M. (2000), Damage and Fracture of Concrete, Beijing China Communication Press, Beijing, China.
  4. Chen Z.P., Chen J.R. and Xue J.Y. and Chen, Y.L. (2014), "Experimental study on mechanical behavior of steel and recycled concrete after high temperature", Ind. Constr., 11, 1-4. https://doi.org/10.13204/j.gyjz201411001.
  5. Chen, Y., He, K. and Han, S.H. and Wei, J. (2018), "Experimental investigation of square concrete filled stainless steel tubular stub columns after exposure to elevated temperatures", Thin-Wall. Struct., 130, 12-31. https://doi.org/10.1016/j.tws.2018.05.007.
  6. Chen, Z.P., Liu, X. and Zhou, W.X. (2018), "Residual bond behavior of high strength concrete-filled square steel tube after elevated temperatures", Steel Compos. Struct., 27(4), 509-523. https://doi.org/10.12989/scs.2018.27.4.509.
  7. Chen, Z.P., Xu, J.J. and Xue, J.Y. (2014), "Performance and calculations of recycled aggregate concrete-filled steel tubular (RACFST) short columns under axial compression", Int. J. Steel Struct., 14(1), 31-42. https://doi.org/10.1007/s13296-014-1005-5.
  8. Deepankar, K.A. and Preeti, S. (2018), "Successive recycled coarse aggregate effect on mechanical behavior and microstructural characteristics of concrete", Comput. Concrete, 21(1), 39-46. https://doi.org/10.12989/cac.2018.21.1.039.
  9. Djelloul, O.K., Menadi, B. and Wardeh, G. and Kenai, S. (2018), "Performance of self-compacting concrete made with coarse and fine recycled concrete aggregates and ground granulated blast-furnace slag", Adv. Concr. Constr., 6(2), 103-121. https://doi.org/10.12989/acc.2018.6.2.103.
  10. EN 197-1 (2011), Cement-Part 1: Composition, specifications and conformity criteria for common cements, European Committee for Standardization.
  11. EN1994-1-2 (2004), Design of composite steel and concrete structures. Part 1-2: General Rules-Structural Fire Design, European Committee for Standardization, Brussels, Belgium.
  12. GB/T 14684-2011 (2011), Sand for Construction, China Planning Press, Beijing, China.
  13. GB/T 50081-2019 (2019), Standard for test methods of concrete physical and mechanical properties, China Planning Press, Beijing, China.
  14. GB50010-2010 (2010), Code for Design of Concrete Structures, China Academy of Building Research, Beijing, China.
  15. Guo, Z.H. (2014), Principles of reinforced concrete, Tsinghua University Press, Beijing, China.
  16. Hager, I. (2014), "Colour change in heated concrete", Fire Technol., 50, 945-958. https://doi.org/10.1007/s10694-012-0320-7.
  17. Han, L.H. and Song, T.Y. (2012), Fire Safety Design Theory of Steel-Concrete Composite Structures, Science Press, Beijing, China.
  18. Huang, Y.B. (2006), "Research on the thermal properties of recycled concrete", Ph.D. Dissertation, Tongji University, Shanghai, China.
  19. ISO 834 (1980), Fire resistance tests. Elements of building construction, International Standard Organization, Geneva, Switzerland.
  20. Liu, C. Fan, J.C., Bai, G.L., Quan, Z., Fu, G. and Zhu, C. (2019), "Cyclic load tests and seismic performance of recycled aggregate concrete (RAC) columns", Constr. Build. Mater., 195, 682-694. https://doi.org/10.1016/j.conbuildmat.2018.10.078.
  21. Ma, H., Xue, J.Y. and Liu, Y.H., etc. (2015), "Cyclic loading tests and shear strength of steel reinforced recycled concrete short columns", Eng. Struct., 92(1), 55-68. https://doi.org/10.1016/j.engstruct.2015.03.009.
  22. Manisha, M., Bhattacharyya, S.K. and Sudhirkumar, V.B. (2020), "Thermal and mechanical properties of concrete and its constituents at elevated temperatures: A review", Constr. Build. Mater., 270, https://doi.org/10.1016/j.conbuildmat.2020.121398.
  23. Marques, A.M., Correia, J.R. and Brito, J.de. (2013), "Post-fire residual mechanical properties of concrete made with recycled rubber aggregate", Fire Safety J., 58, 49-57. https://doi.org/10.1016/j.firesaf.2013.02.002.
  24. Marthong, C., Pyrbot, R.N., Tron, S.L. Mawroh, L.D., Choudhury, M.S.A. and Bharti, G.S. (2018), "Micro-concrete composites for strengthening of RC frame made of recycled aggregate concrete", Comput. Concrete, 22(5), 461-468. https://doi.org/10.12989/cac.2018.22.5.461.
  25. Mirza, S.A. and Lacroix, E.A. (2004), "Comparative Strength Analyses of Concrete-Encased Steel Composite Columns", J. Struct. Eng., 130(12), 1941-1953. 10.1061/(ASCE)0733-9445(2004)130:12(1941).
  26. Murali, G., Indhumathi, T., Karthikeyan, K. and Ramkumar, V.R. (2018), "Analysis of flexural fatigue failure of concrete made with 100% coarse recycled and natural aggregates", Comput. Concrete, 21(3), 291-298. https://doi.org/10.12989/cac.2018.21.3.291.
  27. Shatarat N., Alhaq A.A. and Katkhuda H. and Abdel Jaber, M. (2019), "Investigation of axial compressive behavior of reinforced concrete columns using recycled coarse aggregate and recycled asphalt pavement aggregate", Constr. Build. Mater., 217, 384-393. https://doi.org/10.1016/j.conbuildmat.2019.05.085.
  28. Shatarat, N.K., Katkhuda, H.N., Hyari, K.H. and Asi, I. (2018), "Effect of using recycled coarse aggregate and recycled asphalt pavement on the properties of pervious concrete", Struct. Eng. Mech., 67(3), 283-290. https://doi.org/10.12989/sem.2018.67.3.283.
  29. Subhash C.Y., Dumpati C.T. and Mohammed S. (2016), "Performance studies on concrete with recycled coarse aggregates", Adv. Concrete Constr., 4(4), 263-281. https://doi.org/10.12989/acc.2016.4.4.263.
  30. Suman, S. and Rajasekaran, C. (2016), "Mechanical properties of recycled aggregate concrete produced with Portland Pozzolana Cement", Adv. Concrete Constr., 4(1), 27-35. https://doi.org/10.12989/acc.2016.4.1.027.
  31. Tabsh, S.W. and Abdelfatah, A.S. (2009), "Influence of recycled concrete aggregates on strength properties of concrete", Constr. Build. Mater., 23, 1163-1167. https://doi.org/10.1016/j.conbuildmat.2008.06.007.
  32. Wang, Y.Y., Liu, F.Q. and Xu, L.F. and Zhao, H. (2019), "Effect of elevated temperatures and cooling methods on strength of concrete made with coarse and fine recycled coarse aggregates", Constr. Build. Mater., 210, 540-547. https://doi.org/10.1016/j.conbuildmat.2019.03.215.
  33. Xiao, J. and Falkner, H. (2006), "On residual strength of high-performance concrete with and without polypropylene fibres at elevated temperatures", Fire Saf. J., 41(2), 115-121. https://doi.org/10.1016/j.firesaf.2005.11.004.
  34. Xiao, J. and Zhang, C. (2007), "Fire damage and residual strengths of recycled aggregate concrete", Proceedings of the 6th International Conference on Fracture and Damage Mechanics, Madeira, Portugal, July.
  35. Xiao, J.Z., Li, W.G. and Poon, C.S. (2012), "Recent studies on mechanical properties of recycled aggregate concrete in China - A review", China Technol., 55, 1463-1480. https://doi.org/10.1007/s11431-012-4786-9.
  36. Yan, L.L., Liang, J.F. and Zhao, Y.G. (2019), "Effect of high temperature on the bond performance between steel bars and recycled aggregate concrete", Comput. Concrete, 23(3), 155-160. https://doi.org/10.12989/cac.2019.23.3.155.
  37. Zega, C.J. and Di Maio, A.A. (2009), "Recycled concrete made with different natural coarse aggregates exposed to high temperature", Constr. Build. Mater., 23(5), 2047-2052. https://doi.org/10.1016/j.conbuildmat.2008.08.017.
  38. Zhu, X.Y., Chen, X.D., Shen, N., Tian, H. and Fan, X. (2018), "Mechanical properties of pervious concrete with recycled aggregate", Comput. Concrete, 21(6), 623-635. https://doi.org/10.12989/cac.2018.21.6.623.