DOI QR코드

DOI QR Code

Modeling fire performance of externally prestressed steel-concrete composite beams

  • Zhou, Huanting (School of Civil Engineering and Architecture, Wuhan University of Technology) ;
  • Li, Shaoyuan (School of Civil Engineering and Architecture, Wuhan University of Technology) ;
  • Zhang, Chao (College of Civil Engineering, Tongji University) ;
  • Naser, M.Z. (Glenn Department of Civil Engineering, Clemson University)
  • 투고 : 2019.09.16
  • 심사 : 2021.09.15
  • 발행 : 2021.12.10

초록

This paper examines the fire performance of uninsulated and uncoated restrained steel-concrete composite beams supplemented with externally prestressed strands through advanced numerical simulation. In this work, a sequentially coupled thermo-mechanical analysis is carried out using ABAQUS. This analysis utilizes a highly nonlinear three-dimensional finite element (FE) model that is specifically developed and validated using full-sized specimens tested in a companion fire testing program. The developed FE model accounts for nonlinearities arising from geometric features and material properties, as well as complexities resulting from prestressing systems, fire conditions, and mechanical loadings. Four factors are of interest to this work including effect of restraints (axial vs. rotational), degree of stiffness of restraints, the configuration of external prestressed tendons, and magnitude of applied loading. The outcome of this analysis demonstrates how the prestressing force in the external tendons is primarily governed by the magnitude of applied loading and experienced temperature level. Interestingly, these results also show that the stiffness of axial restraints has a minor influence on the failure of restrained and prestressed steel-concrete composite beams. When the axial restraint ratio does not exceed 0.5, the critical deflection of the composite beam is lower than that of the composite beam with a restraint ratio of 1.0.

키워드

과제정보

The work reported in this paper is partially supported by the National Science Foundation of China under through contract 51878528, 51508399. The support is gratefully acknowledged.

참고문헌

  1. ASTM (2016), "E119-16 - Standard Test Methods for Fire Tests of Building Construction and Materials", Am. Soc. Test. Mater., https://doi.org/10.1520/E0119-10B.1.2.
  2. BSI, and European Committee for Standardization (2004), Design of concrete structures - Part 1-2: General rules - Structural fire design, Eurocode 2. https://doi.org/10.1002/jcp.25002.
  3. CEN (2002), Eurocode 1: Actions on Structures-Part 1-2: General Actions-Actions on Structures Exposed to Fire.
  4. Chen, L., Li, G., Jiang, S. and Wang, W. (2013), "Experimental studies on behavior of headed stud shear connectors at elevated temperatures", Tongji Daxue Xuebao/J. Tongji University. https://doi.org/10.3969/j.issn.0253-374x.2013.08.006.
  5. Chen, S. (2005), "Experimental study of prestressed steel-concrete composite beams with external tendons for negative moments", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2005.05.005.
  6. Chen, S. and Jia, Y. (2010), "Numerical investigation of inelastic buckling of steel-concrete composite beams prestressed with external tendons", Thin-Wall. Struct., https://doi.org/10.1016/j.tws.2009.10.009.
  7. Chen, S., Wang, X. and Jia, Y., (2009), "A comparative study of continuous steel-concrete composite beams prestressed with external tendons: Experimental investigation", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2009.03.005.
  8. Chen, S. and Zhang, Z. (2006), "Effective width of a concrete slab in steel-concrete composite beams prestressed with external tendons", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2005.08.009.
  9. Dall'Asta, A., Dezi, L. and Leoni, G. (2002), "Failure mechanisms of externally prestressed composite beams with partial shear connection", Steel Compos. Struct., https://doi.org/10.12989/scs.2002.2.5.315.
  10. Dall'Asta, A. and Zona, A. (2005), "Finite element model for externally prestressed composite beams with deformable connection", J. Struct. Eng., https://doi.org/10.1061/(ASCE)0733-9445(2005)131:5(706).
  11. Deretic-Stojanovic, B. and Kostic, S.M. (2017), "A simplified matrix stiffness method for analysis of composite and prestressed beams", Steel Compos. Struct., https://doi.org/10.12989/scs.2017.24.1.053.
  12. ECS (2005), EN 1993-1-2: Eurocode 3: Design of steel structures - Part 1-2: General rules - Structural fire design : European Committee for Standardisation : Free Download, Borrow, and Streaming : Internet Archive, European Committee for Standardisation.
  13. Hoadley, P.G. (1963), "Behavior of prestressed composite steel beams", J. Struct.Division, 89(3), 21-34. https://doi.org/10.1061/JSDEAG.0000930
  14. Hwang, J.W., Kwak, J.H. and Kwak, H.G. (2015), "Finite-element model to evaluate nonlinear behavior of posttensioned composite beams with partial shear connection", J. Struct. Eng., (United States). https://doi.org/10.1061/(ASCE)ST.1943-541X.0001174.
  15. Kang, H., Lee, D.H., Hwang, J.H., Oh, J.Y., Kim, K.S. and Kim, H.Y. (2016), "Structural performance of prestressed composite members with corrugated webs exposed to fire", Fire Technol., https://doi.org/10.1007/s10694-015-0521-y.
  16. Kim, K.S. and Lee, D.H. (2011), "Flexural behavior of prestressed composite beams with corrugated web: Part II. Experiment and verification", Compos. Part B: Eng., https://doi.org/10.1016/j.compositesb.2011.04.019.
  17. Kodur, V.K.R. and Naser, M.Z. (2014), "Effect of shear on fire response of steel beams", J. Constr. Steel Res., 97, 48-58. https://doi.org/10.1016/j.jcsr.2014.01.018.
  18. Lee, D.H., Oh, J.Y., Kang, H., Kim, K.S., Kim, H.J. and Kim, H.Y. (2015), "Structural performance of prestressed composite girders with corrugated steel plate webs", J. Constr.Steel Res., https://doi.org/10.1016/j.jcsr.2014.09.014.
  19. Lorenc, W. and Kubica, E. (2006), "Behavior of composite beams prestressed with external tendons: Experimental study", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2006.01.007.
  20. Lou, T., Lopes, S.M.R. and Lopes, A.V. (2016), "Numerical modeling of externally prestressed steel-concrete composite beams", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2016.02.008.
  21. Moscoso, A.M., Tamayo, J.L.P. and Morsch, I.B. (2017), "Numerical simulation of external pre-stressed steel-concrete composite beams", Comput. Concrete. https://doi.org/10.12989/cac.2017.19.2.191.
  22. Ng, C.K. and Tan, K.H. (2006a), "Flexural behaviour of externally prestressed beams. Part II: Experimental investigation", Eng. Struct., https://doi.org/10.1016/j.engstruct.2005.09.016.
  23. Ng, C.K. and Tan, K.H. (2006b), "Flexural behaviour of externally prestressed beams. Part I: Analytical model", Eng. Struct., https://doi.org/10.1016/j.engstruct.2005.09.015.
  24. Ollgaard, J.G., Slutter, R.G. and Fisher, J.W. (1971), "Shear Strength of Stud Connectors in Lightweight and Normal-Weight Concrete", AISC Engineering Journal.
  25. Ren, Y., Wang, Y., Wang, B., Ban, H., Song, J. and Su, G. (2018), "Flexural behavior of steel deep beams prestressed with externally unbonded straight multi-tendons", Thin-Wall. Struct., https://doi.org/10.1016/j.tws.2018.07.022.
  26. Szilard, R. (1959), "Design of prestressed composite steel structures", J. Struct. Division, 85(9), 97-124. https://doi.org/10.1061/JSDEAG.0000455
  27. Zhou, H.T., Li, G.Q. and Jiang, S.C. (2008), "Experimental studies on the properties of steel strand at elevated temperatures", Sichuan Daxue Xuebao (Gongcheng Kexue Ban)/Journal of Sichuan University (Engineering Science Edition).
  28. Zhou, H., Li, S., Chen, L. and Zhang, C. (2018), "Fire tests on composite steel-concrete beams prestressed with external tendons", J. Constr. Steel Res., 143, 62-71. https://doi.org/10.1016/j.jcsr.2017.12.008.
  29. Zona, A., Ragni, L. and Dall'Asta, A. (2008), "Finite element formulation for geometric and material nonlinear analysis of beams prestressed with external slipping tendons", Finite Elem. Anal. Des., https://doi.org/10.1016/j.finel.2008.06.005.
  30. Zona, A., Ragni, L. and Dall'Asta, A. (2009), "Simplified method for the analysis of externally prestressed steel-concrete composite beams", J. Constr. Steel Res., https://doi.org/10.1016/j.jcsr.2008.07.015.