The Journal of the Acoustical Society of Korea (한국음향학회지)

The Acoustical Society of Korea (한국음향학회)
권호 표지
DOI QR코드

DOI QR Code

Analysis of frequency characteristics and evaluation methods of elevator noise

승강기 소음의 주파수 특성 분석 및 평가 방법 고찰

  • Received : 2021.09.28
  • Accepted : 2021.10.28
  • Published : 2021.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

Research on elevator noise has mainly focused on the cause of its occurrence and measures to reduce it. There is still insufficient research on how to accurately measure and evaluate elevator noise. There is a measurement method established as an international standard for the measurement method, but it is also difficult to apply to high-rise apartments, and there are many cases that do not closely reflect the characteristics of elevator noise. In order to solve this problem, a study was conducted to improve the elevator noise measurement method in the current standard. In this study, the characteristics of elevator noise were closely identified. Through frequency analysis of the elevator noise and other equipment, it was verified that the elevator noise is noise with different characteristics from other equipment. Elevator noise was compared with heavy floor impact noise, which is a representative structural transmission noise, as structural transmission noise. Elevator noise was compared with heavy floor impact noise, which is a representative structural transmission noise, as structural transmission noise. The correlation between bang machine and rubber ball was found to be very high at 0.9 level. As a result, it was verified that the mid-low frequency band of the elevator noise is the main structural transmission noise and cannot be evaluated together with other equipment.

승강기 소음에 대한 연구는 주로 발생 원인 및 저감 방안에 대한 것이 많았다. 승강기 소음을 정확하게 측정하고 평가하는 방법에 대해서는 아직 연구가 미비하다. 측정방법에 대해서는 국제표준으로 제정하여 측정 방법이 있지만 그것 또한 고층아파트에 적용하기 힘들고, 승강기 소음의 특성을 면밀히 반영하지 않은 것이 많다. 이러한 문제를 해결하고자 현행 규격에서 승강기 소음 측정 방법을 개선하는 연구가 이루어 졌다. 본 연구에서는 승강기 소음의 특성을 면밀히 파악하고자 하였다. 승강기 소음과 다른 설비기기와의 주파수 분석을 통해 승강기 소음이 다른 설비기기와는 다른 특성의 소음임을 검증 하였다. 승강기 소음은 구조전달소음으로 대표적인 구조전달소음인 중량바닥충격음과 비교 분석을 하였다. 승강기 소음과 중량바닥충격음과의 상관성은 0.9 수준으로 매우 높게 나타났다. 이 결과로 승강기 소음은 중 저주파대역이 주요한 구조전달소음이며 다른 설비기기와 함께 평가될 수 없음을 검증 하였다.

Keywords

Acknowledgement

이 연구는 한국연구재단의 정부지원(과학기술정보통신부)으로 진행 되었습니다. NRF-2020R1A2C1015162.

References

  1. M. W. Kang and Y. K. Oh, "A survey on the response of apartment house resident on elevator noise" (in Korean), The Regional Association of Architectural Institute of Korea, 19, 181-188 (2017).
  2. A. Y. Jung, K. W. Kim, H. K. Shin, and K. S. Yang, "Creteria and characteristics of elevator noise in apartment," Appl. Mech. Mater. 873, 231-236 (2017). https://doi.org/10.4028/www.scientific.net/AMM.873.231
  3. H. S. Kim, H. G. Kim, M. J. Kim, and Y. I. Oh, "Reduction methods of the elevator-operating noise in apartment housings" (in Korean), Proc. KSNVE. 619-626 (1994).
  4. E. S. Jeon and B. H. Cho, "The countermeasure which reduce the noise and vibration of the building elevator" (in Korean), J. Korean Digit. Archit. Inter. Assoc. 5, 36-42 (2005).
  5. H. K. Shin and K. Y. Kim, "Analy sis of subjective responses to elevator noise in apartment houses" (in Korean), Trans. Korean Soc. Noise Vib. Eng. 28, 236-242 (2018). https://doi.org/10.5050/ksnve.2018.28.2.236
  6. M. W. Kang and Y. K. Oh, "A study on the characteristics and actual conditions of operation noise and vibration of rope elevator in high-rise apartment," (in Korean), J. Acoust. Soc. Kr. 40, 84-91 (2021).
  7. M. W. Kang, M. J. Song, and Y. K. Oh, "Evaluation of elevator noise level of apartment houses through vibration measurement" (in Korean), JKIAEBS. 12, 641-654 (2018).
  8. M. W. Kang, Y. K. Jang, and Y. K. Oh, "Analysis of noise level and measurement method for elevator in apartment houses" (in Korean), JKIAEBS. 13, 491-502 (2019).
  9. M. W. Kang and Y. K. Oh, "Validity of elevator noise measurement method ininternational standards on high-rise residential buildings," Sustainability 13, 9806 (2021). https://doi.org/10.3390/su13179806
  10. ISO 16032, 2004 Acoustics-Measurement of Sound Pressure Level from Service Equipment in Buildings-Engineering Method, 2004.
  11. KS F ISO 16032, 2015 Measurement of Sound Pressure Level from Service Equipment in Buildings-Engineering Method, 2015.
  12. KS F 2863-2, Rating of Floor Impact Sound Insulation for Impact Source in Buildings and Building Elements - Part 1 : Floor Impact Sound Insulation Against Standard, Heavy Impact Source, 2017.