과제정보
본 논문의 내용은 2021년도 정부(산업통상자원부)의 재원으로 한국에너지기술평가원의 지원을 받아 수행된 연구임(20183030019460, c-Si 태양전지용 고속 인쇄 전극 공정에 의한 7,000wph급 제조능력을 갖는 고생산성 프린터 개발).
참고문헌
- D. Chen et al., "24.58% total area efficiency of screen-printed, large area industrial silicon solar cells with the tunnel oxide passivated contacts (i-TOPCon) design," Solar Energy Materials and Solar Cells, 206, p. 110258 (2020). https://doi.org/10.1016/j.solmat.2019.110258
- F. Feldmann, M. Bivour, C. Reichel, M. Hermle, and S. W. Glunz, "Passivated rear contacts for high-efficiency n-type Si solar cells providing high interface passivation quality and excellent transport characteristics," Solar energy materials and solar cells, 120, pp. 270-274 (2014). https://doi.org/10.1016/j.solmat.2013.09.017
- P. Stradins et al., "Passivated tunneling contacts to n-type wafer silicon and their implementation into high performance solar cells," National Renewable Energy Lab. (NREL), Golden, CO (United States) (2014).
- A. Moldovan et al., "Tunnel oxide passivated carrier-selective contacts based on ultra-thin SiO2 layers grown by photo-oxidation or wet-chemical oxidation in ozonized water," Conference Proceedings, 42nd IEEE PVSC, pp. 1-6 (2015).
- Y.-W. Ok et al., "Screen printed, large area bifacial N-type back junction silicon solar cells with selective phosphorus front surface field and boron doped poly-Si/SiOx passivated rear emitter," Applied Physics Letters, 113(26), p. 263901 (2018). https://doi.org/10.1063/1.5059559
- A. Rohatgi et al., "Fabrication and modeling of high-efficiency front junction n-type silicon solar cells with tunnel oxide passivating back contact," IEEE Journal of Photovoltaics, 7(5), pp. 1236-1243 (2017). https://doi.org/10.1109/JPHOTOV.2017.2715720
- C. Messmer, A. Fell, F. Feldmann, J. Schon, and M. Hermle, "Upgrade PERC with TOPCon: Efficiency Potential by taking into account the Electrical Gains and Optical Losses," Conference Proceedings, 36th EU PVSEC (2019).
- C. Messmer, A. Fell, F. Feldmann, N. Wohrle, J. Schon, and M. Hermle, "Efficiency roadmap for evolutionary upgrades of PERC solar cells by TOPCon: impact of parasitic absorption," IEEE Journal of Photovoltaics, 10, pp. 335-342 (2019). https://doi.org/10.1109/jphotov.2019.2957642
- H. E. Ciftpinar, M. K. Stodolny, Y. Wu, G. J. Janssen, J. Loffler, J. Schmitz, et al., "Study of screen printed metallization for polysilicon based passivating contacts," Energy Procedia, 124, pp. 851-861 (2017). https://doi.org/10.1016/j.egypro.2017.09.242
- T. Fellmeth, A. Born, A. Kimmerle, F. Clement, D. Biro, and R. Preu, "Recombination at metal-emitter interfaces of front contact technologies for highly efficient silicon solar cells," Energy Procedia, 8, pp. 115-121 (2011). https://doi.org/10.1016/j.egypro.2011.06.111
- R. A. Sinton, A. Cuevas, and M. Stuckings, "Quasi-steady-state photoconductance, a new method for solar cell material and device characterization," Conference Proceedings, 25th IEEE PVSC, pp. 457-460 (1996).
- M. Stodolny, Y. Wu, J. Anker, X. Lu, J. Liu, P. Bronsveld, et al., "PolySi based passivating contacts enabling industrial silicon solar cell efficiencies up to 24%," Conference Proceedings, 46th IEEE PVSC, pp. 1456-1459 (2019).
- S. Mack, J. Schube, T. Fellmeth, F. Feldmann, M. Lenes, and J. M. Luchies, "Metallisation of boron-doped polysilicon layers by screen printed silver pastes," physica status solidi (RRL)-Rapid Research Letters, 11, p. 1700334 (2017). https://doi.org/10.1002/pssr.201700334