Computers and Concrete

  • 제28권5호
  • /
  • Pages.507-519
  • /
  • 2021
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Crack pattern and failure mode prediction of SFRC corbels: Experimental and numerical study

  • Gulsan, Mehmet Eren (Department of Civil Engineering, Gaziantep University, University Avenue) ;
  • Cevik, Abdulkadir (Department of Civil Engineering, Gaziantep University, University Avenue) ;
  • Mohmmad, Sarwar Hasan (Department of Civil Engineering, Gaziantep University, University Avenue)
  • 투고 : 2020.10.16
  • 심사 : 2021.11.16
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, a new procedure was proposed in order to predict the crack pattern and failure mode of steel fiber reinforced concrete (SFRC) corbels. Moreover, an experimental study was carried out in order to investigate the effect of several parameters, such as compressive strength, tensile strength, steel fiber ratio, shear span on the mechanical behavior of SFRC corbels in detail. Totally, 24 RC and SFRC corbels were prepared for the experimental study. Experimental results indicate that each investigated parameter has noticeable effect on the load capacity and failure mode of SFRC corbels. Moreover, finite element (FE) model of the tested corbels were prepared and efficiency of FE model was investigated for further studies. Comparison of FE and experimental results show that there is an acceptable fit between them regarding load capacity and crack patterns. Thereafter, parametric study was carried out via FE analyses in order to obtain a methodology for crack pattern and failure mode prediction of SFRC corbels. As a result of parametric studies, a new procedure was proposed as flowcharts in order to predict the failure mode of SFRC corbels for normal and high strength concrete class separately.

키워드

과제정보

This research was supported by Gaziantep University Scientific Research Projects Unit. (Project Code and Name: MF.12.13-Modeling of Inelastic Behavior of Structures by Soft Computing Techniques).

참고문헌

  1. Beshara, F.B.A., Mustafa, T.S., Mahmoud, A.A. and Khalil, M.M.A. (2020), "Constitutive models for nonlinear analysis of SFRC corbels", J. Build. Eng., 28, 101092. https://doi.org/10.1016/j.jobe.2019.101092.
  2. Campione, G. (2009a), "Flexural response of FRC corbels", Cement Concrete Compos., 31(3), 204-210. https://doi.org/10.1016/j.cemconcomp.2009.01.006.
  3. Campione, G. (2009b), "Performance of steel fibrous reinforced concrete corbels subjected to vertical and horizontal loads", J. Struct. Eng., 135(5), 519-529. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:5(519).
  4. Campione, G., Mendola, L.L. and Mangiavillano, M.L. (2007). "Steel fiber-reinforced concrete corbels: Experimental behavior and shear strength prediction", ACI Struct. J., 104(5), 570-579.
  5. Deifalla, A., Awad, A., Seleem, H. and Abdelrahman, A. (2020a), "Investigating the behavior of lightweight foamed concrete T-beams under torsion, shear and flexure", Eng. Struct., 219, 110741. https://doi.org/10.1016/j.engstruct.2020.110741.
  6. Deifalla, A., Awad, A., Seleem, H. and Abdelrahman, A. (2020b), "Experimental and numerical investigation of the behavior of LWFC L-girders under combined torsion", Struct., 26, 362-377. https://doi.org/10.1016/j.istruc.2020.03.070.
  7. Deifalla, A.F., Zapris, A.G. and Chalioris, C.E. (2021), "Multivariable regression strength model for steel fiber-reinforced concrete beams under torsion", Mater., 14(14), 3889. https://doi.org/10.3390/ma14143889.
  8. Deluce, J.R. (2011), "Cracking behaviour of steel fibre reinforced concrete containing conventional steel reinforcement", M.Sc. Dissertation of Philosophy, University of Toronto, Toronto. http://hdl.handle.net/1807/29523.
  9. Fattuhi, N.I. (1987), "SFRC corbel tests", ACI Struct. J., 84(2), 119-123.
  10. Fattuhi, N.I. (1990a), "Column-load effect on reinforced concrete corbels", J. Struct. Eng., 116(1), 188-197. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:1(188).
  11. Fattuhi, N.I. (1990b), "Strength of SFRC corbels subjected to vertical load", J. Struct. Eng., 116(3), 701-718. https://doi.org/10.1061/(ASCE)0733-9445(1990)116:3(701).
  12. Fattuhi, N.I. (1994a), "Strength of FRC corbels in flexure", J. Struct. Eng., 120(2), 360-377. https://doi.org/10.1061/(ASCE)0733-9445(1994)120:2(360).
  13. Fattuhi, N.I. (1994b), "Reinforced corbels with plain and fibrous concretes", ACI Struct. J., 91(5), 530-536.
  14. Fattuhi, N.I. (1994c), "Reinforced corbels made with high strength concrete and various secondary reinforcements", ACI Struct. J., 91(4), 376-383.
  15. Fattuhi, N.I. and Hughes, B.P. (1989b), "Ductility of reinforced concrete corbels containing either steel fibers or stirrups", ACI Struct. J., 86(6), 644-651.
  16. Fattuhi, N.I. and Hughes. B.P. (1989c), "Reinforced steel fiber concrete corbel with various shear span-to-depth ratios", ACI Mater. J., 86(6), 590-596.
  17. Gulsan, M.E. (2015), "Stochastic finite element based reliability analysis of steel fiber reinforced concrete (SFRC) corbels", Ph.D. Dissertation of Philosophy, University of Gaziantep, Gaziantep.
  18. Gulsan, M.E. and Shaikhan, M.A. (2018), "A new method for repair of fiber reinforced concrete corbels using steel threaded rods", Earthq. Struct., 15(2), 165-178. https://doi.org/10.12989/eas.2018.15.2.165.
  19. Gulsan, M.E., Al Jawahery, M.S., Alshawaf, A.H., Hussein, T.A., Abdulhaleem, K.N. and Cevik, A. (2018), "Rehabilitation of normal and self-compacted steel fiber reinforced concrete corbels via basalt fiber", Adv. Concrete Constr., 6(5), 423. https://doi.org/10.12989/acc.2018.6.5.423.
  20. Gulsan, M.E., Cevik, A. and Kurtoglu, A.E. (2015), "Stochastic finite element based reliability analysis of steel fiber reinforced concrete (SFRC) corbels", Comput. Concrete, 15(2), 279-304. https://doi.org/10.12989/cac.2015.15.2.279.
  21. Khosravikia, F., Kim, H.S., Yi, Y., Wilson, H., Yousefpour, H., Hrynyk, T. and Bayrak, O. (2018), "Experimental and numerical assessment of corbels designed based on strut-and-tie provisions", J. Struct. Eng., 144(9), 04018138. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002137.
  22. Kurtoglu, A.E., Gulsan, M.E., Abdi, H.A., Kamil, M.A. and Cevik, A. (2017), "Fiber reinforced concrete corbels: Modeling shear strength via symbolic regression", Comput. Concrete, 20(1), 65-75. https://doi.org/10.12989/cac.2017.20.1.001.
  23. Md Zin, N., Al-Fakih, A., Nikbakht, E., Teo, W. and Anwar Gad, M. (2019), "Influence of secondary reinforcement on behaviour of corbels with various types of high-performance fiber-reinforced cementitious composites", Mater., 12(24), 4159. https://doi.org/10.3390/ma12244159.
  24. Mustafa, T.S., Beshara, F.B.A., Mahmoud, A.A. and Khalil, M.M. A. (2019). "An improved strut-and-tie model to predict the ultimate strength of steel fiber-reinforced concrete corbels", Mater. Struct., 52(3), 63. https://doi.org/10.1617/s11527-019-1363-8.
  25. Parol, J., Al-Qazweeni, J. and Salam, S.A. (2018), "Analysis of reinforced concrete corbel beams using strut and tie models", Comput. Concrete, 21(1), 95-102. https://doi.org/10.12989/cac.2018.21.1.095.
  26. Ridha, M.M.S, Al-Shafi'i, N.T.H. and Hasan, M.M. (2017), "Ultra-high performance steel fibers concrete corbels: Experimental investigation", Case Study. Constr. Mater., 7, 180-190. https://doi.org/10.1016/j.cscm.2017.07.004.
  27. Saleh, A., Fathy, A., Farouk, A. and Nasser, M. (2019), "Performance of steel fiber reinforced concrete corbels", IRJIET, 3(2), 22-27. http://doi.org/10.21533/pen.v9i2.2285.
  28. Strauss, A., Mordini, A. and Bergmeister, K. (2006), "Nonlinear finite element analysis of reinforced concrete corbels at both deterministic and probabilistic levels", Comput. Concrete, 3(2_3), 123-144. https://doi.org/10.12989/cac.2006.3.2_3.123.