한국분무공학회지 (Journal of ILASS-Korea)

  • 제26권4호
  • /
  • Pages.163-170
  • /
  • 2021
  • /
  • 1226-2277(pISSN)
  • /
  • 2288-9051(eISSN)
한국분무공학회 (Institute for Liquid Atomization and Spray Systems-Korea)
권호 표지
DOI QR코드

DOI QR Code

비상발전기용 PM/NOX 저감장치의 유동특성 연구

Flow Analysis of PM/NOX Reduction System for Emergency Generator

  • 방효원 (국민대학교 자동차공학전문대학원) ;
  • 박기영 (국민대학교 자동차공학전문대학원) ;
  • 이성욱 (국민대학교 자동차공학과)
  • 투고 : 2021.08.30
  • 심사 : 2021.10.27
  • 발행 : 2021.12.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Emergency generators normally use diesel engines. The generators need to conduct weekly no-load operation inspections to ensure stable performance at emergency situations. In particular, the generators with large diesel engines mainly use rectangle type filter substrates. In order to minimize hazardous emissions generated by generators, optimizing the reduction efficiency through CFD analysis of flow characteristics of PM/NOX reduction system is important. In this study, we analyzed internal flow by CFD, which is difficult to confirm by experimental method. The main factors in our numerical study are the changes of flow uniformity and back pressure. Therefore, changes in flow characteristics were studied according to urea injector locations, selective catalyst reduction (SCR) diffuser angle, and filter porosity.

키워드

과제정보

본 연구는 한국환경산업기술원의 재원으로 미세먼지 사각지대 해소 및 관리 실증화 기술개발사업의 지원을 받아 수행하였으며 이에 감사드립니다.

참고문헌

  1. United States Environmental Protection Agency(EPA), "Regulations for Emissions from Heavy Equipment with Compression-Ignition (Diesel) Engines," https://www.epa.gov/regulati-ons-emissions-vehicles-and-engines/regulations-emissions-heavy-equipment-compression, 2018.
  2. I. Arsie, G. Cialeo, F. D'Aniello and C. Pianese, "Control Oriented Modeling of SCR Systems for Automotive Application," SAE Technical Paper, 2017-24-0121.
  3. I. Hwang, C. Myung, S. Park, K. Lee and J. Par- k, "Investigation on the Flow and Spray Characteristics of Urea SCR System in Light Duty Diesel Engine to Improve NOx Reduction Efficiency," KSAE 09-A0117, 2009, pp. 675~678.
  4. S. Moon, N. Jo, S. Oh, H. Lee and T. Kim, "Research on the Prediction of the Nitrogen Oxide Reduction in the Urea-SCR System using the CFD," Transactions of KSME, Vol. 40, No. 3, 2016, pp. 127~138.
  5. M. Seo and H. Chang, "Computational Study on Design of the AIG for the Enhancement of Ammonia Injection in the SCR System," Clean Technology, Vol. 18, No. 4, 2012, pp. 410~418. https://doi.org/10.7464/KSCT.2012.18.4.410
  6. Y. Jeong, G, Park, M. Kim and S. Lee, "A Study on the Flow Uniformity Characteristics of the Mixer Structure in the SDPF System Using CFD," Transactions of KSAE, Vol. 29, No. 3, 2021, pp. 275~282. https://doi.org/10.7467/KSAE.2021.29.3.275
  7. S. Kwag, "Numerical Simulation of Turbulent Flows in Inlet Duct of Heat Recovery Steam Generator," Journal of Advanced Marine Engineering and Technology, Vol. 35, No. 6, 2011, pp. 809~813. https://doi.org/10.5916/jkosme.2011.35.6.809
  8. M. Lai, T. Lee, J. Kim, C. Cheng, P. Li and G. Chui, "Numerical and Experimental-Characterization of Automotive Catalytic Converter Internal Flows," Journal of Fluid and Structures, Vol. 6, No. 4, 1992, pp. 451~470. https://doi.org/10.1016/0889-9746(92)90026-Y
  9. S. F. Benjamin, N. Haimad, C. A Roberts and J. Wollin, "Modelling the Flow Distribution through Automotive Catalytic Converters," Proc. Instn. Mech. Engrs, Vol. 215, Part C, 2001. pp. 379~383.
  10. H. Weltens, H. Bressler, F. Terres, H. Neumaier and D. Rammoser, "Optimization of Catalytic Converter Gas low Distribution by CFD Predictions," 1993, SAE 930780.
  11. ANSYS Fluent 2021 R1 Theory Guide, "The Kuhnke Model," https://ansyshelp.ansys.com/account/secured?returnurl=/Views/Secured/corp/v211/en/flu_th/flu_th_sect_wall_film_impact.html%23flu_th_sect_wall_film_Kuhnke, 2021.
  12. Y. Yi, "Development of a 3D numerical model for predicting spray, urea decomposition and mixing in SCR systems," SAE Technical Paper, 2007-01-3985, 930780.
  13. C. Shin, J. Kim, M. Kim et al., "Examinations on the Frictional Flow Features of Porous Media by Flow Velocity and Porosity Variations," Transactions of the KSME, Vol. 42, No. 3, 2018, pp. 207~214.
  14. Y. Kim, S. Jeong and W. Kim, "An Numerical Study on the Flow Uniformity and Pressure Drop in Dual Monolith Catalytic Converter during the Rapid Acceleration / Deceleration Driving," Transactions of KSAE, Vol. 15, No. 5, 2007, pp. 63~71.