과제정보
This work was supported by the China Scholarship Council (grant number 201906575028); and Intelligent Ship Testing and Verification (grant number 2018/473). The second author greatly acknowledges the funding from DNV AS and RCCL for the Maritime Safety Research Centre establishment and operation. The opinions expressed herein are those of the authors and should not be construed to reflect the views of DNV AS and RCCL.
참고문헌
- Alegret, G., et al., 2015. Modeling of a large marine two-stroke diesel engine with cylinder bypass valve and EGR system. IFAC 48 (16), 273-278.
- Benson, R.S., 1977. A new gas dynamic model for the gas exchange process in two stroke loop and cross scavenged engines. Int. J. Mech. Sci. 19 (12), 693-711. https://doi.org/10.1016/0020-7403(77)90056-X
- Chen, P., Wang, J., 2012. Control-oriented modeling and observer-based estimation of solid and gas temperatures for a diesel engine aftertreatment system. ASME J. Dyn. Syst. Meas. Contr. 134 (6), 061011. https://doi.org/10.1115/1.4006632
- Chen, P., Wang, J., 2014. Control-oriented model for integrated diesel engine and aftertreatment systems thermal management. Contr. Eng. Pract. 22, 81-93. https://doi.org/10.1016/j.conengprac.2013.09.009
- Chen, W.S., et al., 2019. Mechanism and performance of the SCR of NO with NH3 over sulfated sintered ore catalyst. Catalysts 9 (1), 90. https://doi.org/10.3390/catal9010090
- Cho, C.P., et al., 2017. NOx reduction and N2O emissions in a diesel engine exhaust using Fe-zeolite and vanadium based SCR catalysts. Appl. Therm. Eng. 110, 18-24. https://doi.org/10.1016/j.applthermaleng.2016.08.118
- Choi, C., et al., 2015a. Numerical analysis of urea decomposition with static mixers in marine SCR system. J. Clean Energy Technol. 3 (1), 39-42. https://doi.org/10.7763/JOCET.2015.V3.165
- Choi, C., et al., 2015b. Numerical analysis of NOx reduction for compact design in marine urea-SCR system. J. Nav. Archit. Ocean Eng. 7, 1020-1033. https://doi.org/10.1515/ijnaoe-2015-0071
- Dang, D., Wallace, F.J., 1992. Some single zone scavenging models for two-stroke engines. Int. J. Mech. Sci. 34 (8), 595-604. https://doi.org/10.1016/0020-7403(92)90057-N
- Foteinos, M.I., et al., 2019. Simulation of the transient thermal response of a high pressure selective catalytic reduction aftertreatment system for a tier III two-stroke marine diesel engine. J. Eng. Gas Turbines Power 141, 071001-1. https://doi.org/10.1115/1.4042131
- Foteinos, M.I., et al., 2020. Response of a direct-drive large marine two-stroke engine coupled to SCR exhaust aftertreatment system when operating in waves. P I Mech. Eng M-J. EnG. 234 (3), 651-667.
- Galindo, J., et al., 2013. Characterization of a radial turbocharger turbine in pulsating flow by means of CFD and its application to engine modeling. Appl. Energy 103, 116-127. https://doi.org/10.1016/j.apenergy.2012.09.013
- Gan, H.B., et al., 2020. Parametric investigation of pre-injection on the combustion, knocking and emissions behaviour of a large marine four-stroke dual-fuel engine. Fuel, p. 281.
- Ghojel, J.I., 2010. Review of the development and applications of the wiebe function: a tribute to the contribution of Ivan Wiebe to engine research. Int. J. Engine Res. 11 (4), 297-312. https://doi.org/10.1243/14680874JER06510
- Gholami, F., et al., 2020. Technologies for the Nitrogen Oxides Reduction from Flue Gas: A Review. Fuel, p. 714.
- Gu, Y.W., Wallace, S.W., 2017. A potentially overestimated compliance method for the Emission Control Areas. Transport. Res. Part D. 55, 51-66. https://doi.org/10.1016/j.trd.2017.06.024
- Heywood, J.B., 1988. Internal Combustion Engine Fundamentals. McGraw-Hill.
- Hountalas, D.T., 2000. Prediction of marine diesel engine performance under fault conditions. Appl. Therm. Eng. 20 (18), 1753-1783. https://doi.org/10.1016/S1359-4311(00)00006-5
- IMO, 2008. Annex VI of MARPOL 73/78, Regulations for the Prevention of Air Pollution from Ships and NOx Technical Code. International Maritime Organization, London, UK.
- IMO, 2017. Report of the Marine Environment Protection Committee on its SeventyFirst Session, Annex 1 Resolution MEPC.286(71), (Designation of the Baltic Sea and the North Sea Emission Control Areas. International Maritime Organization, London, UK.
- Jung, Y., et al., 2017. NOx and N2O emissions over a Urea-SCR system containing both V2O5 -WO3/TiO2 and Cu-zeolite catalysts in a diesel engine. Chem. Eng. J. 326, 853-862. https://doi.org/10.1016/j.cej.2017.06.020
- Lamas, M.I., et al., 2013. Internal modifications to reduce pollutant emissions from marine. A numerical approach engines. J. Nav. Archit. Ocean Eng. 5, 493-501. https://doi.org/10.2478/IJNAOE-2013-0148
- Li, Y.L., et al., 2020. Hierarchical three-dimensionally ordered macroporous Fe-V binary metal oxide catalyst for low temperature selective catalytic reduction of NOx from marine diesel engine exhaust. Appl. Catal. B Environ. 268.
- MAN B&W, 2019. MAN Emission Project Guide: MAN B&W Two-Stroke Marine Engines. MAN B&W press, Copenhagen.
- Moon, S.J., et al., 2014. Numerical prediction on the influence of mixer on the performance of urea-SCR system. Waste Int J Mech Aero Ind Mechatron 8 (5), 972-978.
- Nahim, H.M., et al., 2016. Oriented review to potential simulator for faults modeling in diesel engine. J. Mar. Sci. Technol. 21 (3), 533-551. https://doi.org/10.1007/s00773-015-0358-6
- Nielsen, J.B., Pedersen, E., 2019. A system approach to selective catalyst reduction DeNO(x) monolithic reactor modelling using bond graphs. P I Mech. Eng M-J. EnG. 233 (2), 632-642.
- Park, T., et al., 2014. Effect of static mixer geometry on flow mixing and pressure drop in marine SCR applications. J. Nav. Archit. Ocean Eng. 6 (1), 27-38. https://doi.org/10.2478/IJNAOE-2013-0161
- Pedersen, N., et al., 2016. FMI for Co-simulation of embedded control software. In: Proceedings of the 1st Japanese Modelica Conference. Linkoping University Electronic Press, pp. 70-77 (Linkoping Electronic Conference Proceedings; No. 124).
- Praveena, V., Martin, M.L.J., 2018. A review on various after treatment techniques to reduce NOx emissions in a CI engine. J. Energy Inst. 91 (5), 704-720. https://doi.org/10.1016/j.joei.2017.05.010
- Rubio, J.A.P., et al., 2018. Marine diesel engine failure simulator based on thermodynamic model. Appl. Therm. Eng. 144, 982-995. https://doi.org/10.1016/j.applthermaleng.2018.08.096
- Shen, H., Zhang, J., 2020. Applicable and comparative research of compressor mass flow rate and isentropic efficiency empirical models to marine large-scale compressor. Energies 13 (1), 47. https://doi.org/10.3390/en13010047
- Shen, H., et al., 2020. Development of a marine two-stroke diesel engine MVEM with in-cylinder pressure trace predictive capability and a novel compressor model. J. Mar. Sci. Eng. 8 (3), 204. https://doi.org/10.3390/jmse8030204
- Sigurdsson, E., 2011. Scavenging Flow in a Two-Stroke Diesel Engine. University of Denmark.
- Spath, N.. DNV GL releases updated DNV GL NOx TIER III compliance guide. https://www.dnvgl.com/news/dnv-gl-releases-updated-dnv-gl-nox-tier-iiicompliance-guide-98168. (Accessed 17 August 2020).
- Sung, Y., et al., 2020. Synergistic effect of mixer and mixing chamber on flow mixing and NOx reduction in a marine urea-SCR system. Chem. Eng. Process 150.
- Tang, Y., 2018. Research on the Modeling Methods of Power Engine for Marine Engine Room Simulator. Dalian Maritime University.
- Tang, Y., Zhang, J., 2017a. Development of a real-time two-stroke marine diesel engine model with in-cylinder pressure prediction capability. Appl. Energy 194, 55-70. https://doi.org/10.1016/j.apenergy.2017.03.015
- Tang, Y., Zhang, J., 2017b. Investigating the effect of cylinder body on the accuracy of marine diesel engine model. J. Harbin Eng. Univ. 38 (12), 1836-1843.
- Theotokatos, G., et al., 2018. Development of an extended mean value engine model for predicting the marine two-stroke engine operation at varying settings. Energy 143, 533-545. https://doi.org/10.1016/j.energy.2017.10.138
- Theotokatos, G., Tzelepis, V., 2015. A computational study on the performance and emission parameters mapping of a ship propulsion system. Proc. Inst. Mech. Eng. Part M-J Eng Maritime Environ. 229, 58-76.
- Tsinoglou, D.N., et al., 2004. Transient modelling of flow distribution in automotive catalytic converters. Appl. Math. Model. 28 (9), 775-794. https://doi.org/10.1016/j.apm.2003.12.006
- Um, H.S., et al., 2019. Numerical study on the design of urea decomposition chamber in LP SCR system. J. Nav. Archit. Ocean Eng. 11, 307-313. https://doi.org/10.1016/j.ijnaoe.2018.06.005
- UN, 2017. Review of Maritime Transport. United nations conference on trade and development, United Nations.
- Vignesh, R., Ashok, B., 2020. Critical interpretative review on current outlook and prospects of selective catalytic reduction system for De-NOx strategy in compression ignition engine, p. 276. Fuel.
- Wang, Z.Y., et al., 2019. Nitrogen oxide removal by coal-based activated carbon for a marine diesel engine. Appl. Sci. 9 (8), 1656. https://doi.org/10.3390/app9081656
- Wang, D.W., et al., 2020a. Numerical and thermodynamic study on effects of high and low pressure exhaust gas recirculation on turbocharged marine low-speed engine. Appl. Energy 261.
- Wang, Z.G., et al., 2020b. Reaction mechanism and chemical kinetics of NH3-NO/NO2-SCR system with vanadium-based catalyst under marine diesel exhaust conditions, 234 (3), 342-352. https://doi.org/10.1177/0957650919857618
- Watson, N., Janota, M.S., 1982. Turbocharging the Internal Combustion Engine. Macmillan, London.
- Woschni, G., 1967. A Universally Applicable Equation for the Instantaneous Heat Transfer Coefficient in the Internal Combustion Engine. SAE Paper no 670931.
- Xi, H.Y., et al., 2019. New experimental results of NO removal from simulated marine engine exhaust gases by Na2S2O8/urea solutions. Chem. Eng. J. 362, 12-20. https://doi.org/10.1016/j.cej.2019.01.002
- Xiang, L., et al., 2019. Investigation on gaseous fuels interchangeability with an extended zero-dimensional engine model. Energy Convers. Manag. 183, 500-514. https://doi.org/10.1016/j.enconman.2019.01.013
- Xiao, Y., et al., 2019. Investigation on the control strategy for marine selective catalytic reduction system. J. Dyn Syst-T ASME. 141 (1).
- Ye, D., et al., 2016. Investigation of the promotion effect of WO3 on the decomposition and reactivity of NH4HSO4 with NO on V2O5-WO3/TiO2 SCR catalysts. RSC Adv. 6, 55584-55592. https://doi.org/10.1039/C6RA09072A
- Yu, B., 2016. Numerical simulation study on optimal layout of static mixer in SCR denitration system. Comput. Appl. Softw. 33 (12), 60-62.
- Zhang, C.F., et al., 2019a. Optimisation design of SCR mixer for improving deposit performance at low temperatures. Fuel 237, 465-474. https://doi.org/10.1016/j.fuel.2018.10.025
- Zhang, L., et al., 2019b. Recent advances in the preparation of zeolites for the selective catalytic reduction of NOx in diesel engines. React. Chem. Eng. 4, 975-985. https://doi.org/10.1039/C8RE00214B
- Zhu, Y.Q., et al., 2018. Influences of NH4NO3 on the NOx reduction pathways with vanadium-based catalyst under diesel exhaust conditions. Russ. J. Phys. Chem. (Engl. Transl.) A 92, 1473-1480. https://doi.org/10.1134/s0036024418080319
- Zhu, Y.Q., et al., 2019a. Ammonium-salt formation and catalyst deactivation in the SCR system for a marine diesel engine. Catalysts 9 (1), 21. https://doi.org/10.3390/catal9010021
- Zhu, Y.Q., Zhang, R., Zhou, S., et al., 2019b. Performance optimization of high-pressure SCR system in a marine diesel engine. Part I: flow Optimization and Analysis. Top. Catal. 62, 27-39. https://doi.org/10.1007/s11244-018-1124-x
- Zhu, Y.Q., Zhang, R., Zhou, S., et al., 2019c. Performance optimization of high-pressure SCR system in a marine diesel engine. Part II: catalytic reduction and process. Top. Catal. 62, 40-48. https://doi.org/10.1007/s11244-018-1088-x
- Zhu, Y.Q., et al., 2020. Combustion and emission characteristics for a marine low-speed diesel engine with high-pressure SCR system. Environ. Sci. Pollut. Res. 27, 12851-12865. https://doi.org/10.1007/s11356-019-04194-2