Acknowledgement
This work was partly supported by the National Research Foundation of Korea (NRF) grant funded by the Korea government(MSIT) (No. 2017R1A5A1014883).
References
- Barker, A., Timco, G., Gravesen, H., Volund, P., 2005. Ice loading on Danish wind turbines: part 1: dynamic model tests. Cold Reg. Sci. Technol. 41 (1), 1-23. https://doi.org/10.1016/0165-232X(87)90039-5
- Di, S., Xue, Y., Wang, Q., Bai, X., 2017. Discrete element simulation of ice loads on narrow conical structures. Ocean Eng. 146, 282-297. https://doi.org/10.1016/j.oceaneng.2017.09.033
- Ehlers, S., Kujala, P., 2014. Optimization-based material parameter identification for the numerical simulation of sea ice in four-point bending. Proc. IME M J. Eng. Marit. Environ. 228 (1), 70-80.
- Gravesen, H., Sorensen, S.L., Volund, P., Barker, A., Timco, G., 2005. Ice loading on Danish wind turbines: Part 2. Analyses of dynamic model test results. Cold Reg. Sci. Technol. 41 (1), 25-47. https://doi.org/10.1016/j.coldregions.2004.05.009
- Hopkins, M.A., 1992. Numerical Simulation of Systems of Multitudinous Polygonal Blocks. COLD REGIONS RESEARCH AND ENGINEERING LAB HANOVER NH.
- Hopkins, M.A., 1998. Four stages of pressure ridging. J. Geophys. Res.: Oceans 103 (C10), 21883-21891. https://doi.org/10.1029/98JC01257
- Ji, S., Di, S., Liu, S., 2015. Analysis of ice load on conical structure with discrete element method. Eng. Comput. 32 (4), 1121-1134. https://doi.org/10.1108/EC-04-2014-0090
- Ji, S., Di, S., Long, X., 2017. DEM simulation of uniaxial compressive and flexural strength of sea ice: parametric study. J. Eng. Mech. 143 (1), C4016010. https://doi.org/10.1061/(ASCE)EM.1943-7889.0000996
- Kloss, C., Goniva, C., Hager, A., Amberger, S., Pirker, S., 2012. Models, algorithms and validation for opensource DEM and CFDeDEM. Progr. Computat. Fluid Dyn. Int. J. 12 (2-3), 140-152. https://doi.org/10.1504/PCFD.2012.047457
- Kujala, P., Riska, K., Varsta, P., Koskivaara, R., Nyman, T., 1990. Results from in situ four point bending tests with Baltic sea ice. August. In: Helsinki University of Technology/Laboratory of Naval Architecture and Marine Engineering, IAHR Ice Symposium (Finland).
- Loset, S., 1994. Discrete element modelling of a broken ice field-Part I: model development. Cold Reg. Sci. Technol. 22 (4), 339-347. https://doi.org/10.1016/0165-232X(94)90019-1
- Liu, L., Ji, S., 2018. Ice load on floating structure simulated with dilated polyhedral discrete element method in broken ice field. Appl. Ocean Res. 75, 53-65. https://doi.org/10.1016/j.apor.2018.02.022
- Long, X., Ji, S., 2017. The attributes of local ice pressure analyzed by discrete element method. In: Paper Presented at the Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions.
- Morgan, D., Sarracino, R., McKenna, R., Thijssen, J.W., 2015. Simulations of ice rubbling against conical structures using 3D DEM. In: Paper Presented at the Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions.
- Paavilainen, J., Tuhkuri, J., 2013. Pressure distributions and force chains during simulated ice rubbling against sloped structures. Cold Reg. Sci. Technol. 85, 157-174. https://doi.org/10.1016/j.coldregions.2012.09.005
- Paavilainen, J., Tuhkuri, J., Polojarvi, A., 2011. 2D numerical simulations of ice rubble formation process against an inclined structure. Cold Reg. Sci. Technol. 68 (1-2), 20-34. https://doi.org/10.1016/j.coldregions.2011.05.003
- Polojarvi, A., Tuhkuri, J., 2009. 3D discrete numerical modelling of ridge keel punch through tests. Cold Reg. Sci. Technol. 56 (1), 18-29. https://doi.org/10.1016/j.coldregions.2008.09.008
- Polojarvi, A., Tuhkuri, J., 2013. On modeling cohesive ridge keel punch through tests with a combined finite-discrete element method. Cold Reg. Sci. Technol. 85, 191-205. https://doi.org/10.1016/j.coldregions.2012.09.013
- Potyondy, D.O., Cundall, P., 2004. A bonded-particle model for rock. Int. J. Rock Mech. Min. Sci. 41 (8), 1329-1364. https://doi.org/10.1016/j.ijrmms.2004.09.011
- Pradana, M.R., Qian, X., 2020. Bridging local parameters with global mechanical properties in bonded discrete elements for ice load prediction on conical structures. Cold Reg. Sci. Technol. 173, 102960. https://doi.org/10.1016/j.coldregions.2019.102960
- Sun, S., Shen, H.H., 2012. Simulation of pancake ice load on a circular cylinder in a wave and current field. Cold Reg. Sci. Technol. 78, 31-39. https://doi.org/10.1016/j.coldregions.2012.02.003
- Tian, Y., Huang, Y., 2013. The dynamic ice loads on conical structures. Ocean Eng. 59, 37-46. https://doi.org/10.1016/j.oceaneng.2012.12.004
- Xu, N., Yue, Q., Bi, X., Tuomo, K., Zhang, D., 2015. Experimental study of dynamic conical ice force. Cold Reg. Sci. Technol. 120, 21-29. https://doi.org/10.1016/j.coldregions.2015.08.010
- Yu, B., Wu, W., Xu, N., Yue, Q., Liu, S., 2007. Numerical simulation of dynamic ice force on conical structure. In: Paper Presented at the Proceedings of the International Conference on Port and Ocean Engineering under Arctic Conditions.
- Yue, Q., Qu, Y., Bi, X., Tuomo, K., 2007. Ice force spectrum on narrow conical structures. Cold Reg. Sci. Technol. 49 (2), 161-169. https://doi.org/10.1016/j.coldregions.2007.02.002
Cited by
- Kulluk-shaped arctic floating platform interacting with drifting level ice by discrete element method vol.236, 2021, https://doi.org/10.1016/j.oceaneng.2021.109479
- Ice loads and ice-induced vibrations of offshore wind turbine based on coupled DEM-FEM simulations vol.243, 2021, https://doi.org/10.1016/j.oceaneng.2021.110197