Coupled systems mechanics

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Special issue on multiscale computations for solids and fluids

  • Ibrahimbegovic, Adnan (Universite de Technologie Compiegne - Sorbonne Universite, Laboratoire Roberval de Mecanique, Centre de Recherche Royallieu)
  • Received : 2021.08.02
  • Accepted : 2021.10.11
  • Published : 2021.12.25
⟨ Previous Next ⟩

Abstract

This special issue contains selected papers first presented in a short format at the 5th International Conference ECCOMAS MSF 2019-Multiscale Computations for Solids and Fluids, organized in Dalmatian capital Split, Croatia, June 30-July 2, 2021.

Keywords

Acknowledgement

The research described in this paper was financially supported by the Chair for Computational Mechanics (120-2015 RDISTRUCT-000010 and RDISTRUCT-000010) and EC funding (FEDER), as well as IUF funding for Senior Member.

References

  1. Balic, A., Hadzalic, E. and Dolarevic, S. (2021), "Identification for the strain-dependent coefficient of permeability by combining the results of experimental and numerical oedometer tests with free lateral movement", Couple. Syst. Mech., 10(5/6), 1-15.
  2. Bartulovic, A., Tomcevic, Z., Bubalo, A. and Hild, F. (2021), "Assessment of DVC measurement uncertainty on glass fiber reinforced polymers with various fiber architectures", Couple. Syst. Mech., 10(5/6), 1-19.
  3. Grozdanovic, G., Galic, M. and Marovic, P. (2021), "Some aspects of the analysis of glass structures exposed to impact load", Couple. Syst. Mech., 10(5/6), 1-16.
  4. Ibrahimbegovic, A. and Nikolic, M. (2021), "Proceedings ECCOMAS MSF 2021-Multiscale computations for solids and fluids", University of Sarajevo Press.
  5. Kalajdzisalihovic, H., Milasinovic, Z. and Harapin Z. (2021), "Developing of a new weir type using the smoothed particle hydrodynamic model", Couple. Syst. Mech., 10(5/6), 1-18.
  6. Kozar, I., Bede, N., Bogdanic, A. and Mrakovcic, S. (2021), "Data driven inverse stochastic models for fiber reinforced concrete", Couple. Syst. Mech., 10(5/6), 1-13.
  7. Kozar, I., Lozzi Kozar, D. and Toric Malic, N. (2021), "Simple factor analysis of measured data", Couple. Syst. Mech., 10(5/6), 1-8.
  8. Suljevic, S., Ibrahimbegovic, A., Karavelic, E. and Dolarevic, S. (2021), "Meso-model based deterministic approach to parameter estimation of 3D macro-scale model representing full set of failure modes", Couple. Syst. Mech., 10(5/6), 1-24.
  9. Suvalija, S., Milisic, H. and Hadzic, E. (2021), "Good modeling practice of water treatment processes", Couple. Syst. Mech., 10(5/6), 1-14.
  10. Szardenings, A., Hoefer, N. and Fassbender, H. (2021), "Towards a reduced order model of battery systems: approximation of the cooling plate", Couple. Syst. Mech., 10(5/6), 1-18.
  11. Vrgoc, A., Tomicevic, Z., Smaniotto, B. and Hild, F. (2021), "Damage charcterization in fiber reinforced polymer via Digital Volume Correlation", Couple. Syst. Mech., 10(5/6), 1-19.
  12. Zaplatic, A., Tomicevic, Z., Cakmak, D. and Hild, F. (2021), "Identifiability of Ludwik's law parameters depending on the sample geometry via inverse identification procedure", Couple. Syst. Mech., 10(5/6), 1-18.