Advances in concrete construction

Techno-Press (테크노프레스)
권호 표지
DOI QR코드

DOI QR Code

Shaking table test and horizontal torsional vibration response analysis of column-supported vertical silo group silo structure

  • Li, Xuesen (School of Civil Engineering, Henan University of Technology) ;
  • Ding, Yonggang (School of Civil Engineering, Henan University of Technology) ;
  • Xu, Qikeng (School of Civil Engineering, Henan University of Technology)
  • Received : 2021.04.18
  • Accepted : 2021.10.26
  • Published : 2021.11.25
⟨ Previous Next ⟩

Abstract

Reinforced concrete vertical silos are universal structures that store large amounts of granular materials. Due to the asymmetric structure, heavy load, uneven storage material distribution, and the difference between the storage volume and the storage material bulk density, the corresponding earthquake is very complicated. Some scholars have proposed the calculation method of horizontal forces on reinforced concrete vertical silos under the action of earthquakes. Without considering the effect of torsional effect, this article aims to reveal the expansion factor of the silo group considering the torsional effect through experiments. Through two-way seismic simulation shaking table tests on reinforced concrete column-supported group silo structures, the basic dynamic characteristics of the structure under earthquake are obtained. Taking into account the torsional response, the structure has three types of storage: empty, half and full. A comprehensive analysis of the internal force conditions under the material conditions shows that: the different positions of the group bin model are different, the side bin displacement produces a displacement difference, and a torsional effect occurs; as the mass of the material increases, the structure's natural vibration frequency decreases and the damping ratio Increase; it shows that the storage material plays a role in reducing energy consumption of the model structure, and the contribution value is related to the stiffness difference in different directions of the model itself, providing data reference for other researchers; analyzing and calculating the model stiffness and calculating the internal force of the earthquake. As the horizontal side shift increases in the later period, the torsional effect of the group silo increases, and the shear force at the bottom of the column increases. It is recommended to consider the effect of the torsional effect, and the increase factor of the torsional effect is about 1.15. It can provide a reference for the structural safety design of column-supported silos.

Keywords

References

  1. Al-Furjan, M., Dehini, R., Khorami, M., Habibi, M. and won Jung, D. (2021a), "On the dynamics of the ultra-fast rotating cantilever orthotropic piezoelectric nanodisk based on nonlocal strain gradient theory", Compos. Struct., 255, 112990. https://doi.org/10.1016/j.compstruct.2020.112990.
  2. Al-Furjan, M., Fereidouni, M., Sedghiyan, D., Habibi, M. and won Jung, D. (2021b), "Three-dimensional frequency response of the CNT-Carbon-Fiber reinforced laminated circular/annular plates under initially stresses", Compos. Struct., 257, 113146. https://doi.org/10.1016/j.compstruct.2021.114438.
  3. Bai, Y., Alzahrani, B., Baharom, S. and Habibi, M. (2020), "Semi-numerical simulation for vibrational responses of the viscoelastic imperfect annular system with honeycomb core under residual pressure", Eng. Comput., 1-26.
  4. Cao, X., Huang, Z., He, C., Wu, W., Xi, L., Li, Y. and Fang, D. (2021), "In-situ synchrotron X-ray tomography investigation of the imperfect smooth-shell cylinder structure", Compos. Struct., 267, 113926. https://doi.org/10.12989/acc.2021.12.2.135.
  5. Cao, Y., Miraba, S., Rafiei, S., Ghabussi, A., Bokaei, F., Baharom, S., Haramipour, P. and Assilzadeh, H. (2020), "Economic application of structural health monitoring and internet of things in efficiency of building information modeling", Smart Struct. Syst., 26(5), 559-573. https://doi.org/10.12989/sss.2020.26.5.559.
  6. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  7. Chen, F.X., Zhong, Y.C., Gao, X.Y., Jin, Z.Q., Wang, E.D., Zhu, F.P., Shao, X.X. and He, X.Y. (2021a), "Non-uniform model of relationship between surface strain and rust expansion force of reinforced concrete", Sci. Report., 11(1), 1-9. https://doi.org/10.1038/s41598-021-88146-2.
  8. Chen, F., Jin, Z., Wang, E., Wang, L., Jiang, Y., Guo, P., Gao, X. and He, X. (2021b), "Relationship model between surface strain of concrete and expansion force of reinforcement rust", Sci. Report., 11(1), 1-11. https://doi.org/10.1038/s41598-021-83376-w.
  9. Dai, Z., Jiang, Z., Zhang, L. and Habibi, M. (2021a), "Frequency characteristics and sensitivity analysis of a size-dependent laminated nanoshell", Adv. Nano Res., 10(2), 175-189. https://doi.org/10.12989/anr.2021.10.2.175.
  10. Dai, Z., Zhang, L., Bolandi, S.Y. and Habibi, M. (2021b), "On the vibrations of the non-polynomial viscoelastic composite open-type shell under residual stresses", Compos. Struct., 263, 113599. https://doi.org/10.1016/j.dt.2021.03.025.
  11. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2021), "Analyzing shear strength of steel-concrete composite beam with angle connectors at elevated temperature using finite element method", Steel Compos. Struct., 40(6), 853-868. https://doi.org/10.12989/scs.2021.40.6.853.
  12. Di Shujiang, T.K.W.M. (2006), "Finite-element analysis and short-cut calculation of natural vibration frequency about group-silos supported by cylinder [J]", Spec. Struct., 4.
  13. Djelloul, Z. and Mohammed, D. (2018), "Contribution to the seismic behaviour of steel silos: Full finite-element analysis versus the Eurocode approach", Asian J. Civil Eng., 19(7), 757-773. https://doi.org/10.1007/s42107-018-0062-z
  14. Dogangun, A., Karaca, Z., Durmus, A. and Sezen, H. (2009), "Cause of damage and failures in silo structures", J. Perform. Constr. Facil., 23(2), 65-71. https://doi.org/10.14359/3390.
  15. Du, C.W., Zhao, T.I., Liu, Z.Y., Li, X.G. and Zhang, D.W. (2016), "Corrosion behavior and characteristics of the product film of API X100 steel in acidic simulated soil solution", Int. J. Min. Metal. Mater., 23(2), 176-183. https://doi.org/10.1007/s12613-016-1225-0.
  16. Feng, S., Zuo, C., Zhang, L., Tao, T., Hu, Y., Yin, W., Qian, J. and Chen, Q. (2021a), "Calibration of fringe projection profilometry: A comparative review", Opt. Laser. Eng., 143, 106622. https://doi.org/10.1016/j.optlaseng.2021.106622.
  17. Feng, S., Zuo, C., Zhang, L., Yin, W. and Chen, Q. (2021b), "Generalized framework for non-sinusoidal fringe analysis using deep learning", Photon. Res., 9(6), 1084-1098. https://doi.org/10.1364/PRJ.420944.
  18. Gao, J., Koopialipoor, M., Armaghani, D.J., Ghabussi, A., Baharom, S., Morasaei, A., Shariati, A., Khorami, M. and Zhou, J. (2020), "Evaluating the bond strength of FRP in concrete samples using machine learning methods", Smart Struct. Syst., 26(4), 403-418. https://doi.org/10.12989/sss.2020.26.4.403.
  19. Ghabussi, A., Ashrafi, N., Shavalipour, A., Hosseinpour, A., Habibi, M., Moayedi, H., Babaei, B. and Safarpour, H. (2019), "Free vibration analysis of an electro-elastic GPLRC cylindrical shell surrounded by viscoelastic foundation using modified length-couple stress parameter", Mech. Base. Des. Struct. Mach., 49(5), 1-25. https://doi.org/10.1080/15397734.2019.1705166.
  20. Ghabussi, A., Habibi, M., NoormohammadiArani, O., Shavalipour, A., Moayedi, H. and Safarpour, H. (2020a), "Frequency characteristics of a viscoelastic graphene nanoplatelet-reinforced composite circular microplate", J. Vib. Contr., 27(1-2), 101-118. https://doi.org/10.1177/1077546320923930.
  21. Ghabussi, A., Marnani, J.A. and Rohanimanesh, M.S. (2020b), "Improving seismic performance of portal frame structures with steel curved dampers", Struct., 24, 27-40. https://doi.org/10.1016/j.istruc.2019.12.025.
  22. Ghabussi, A., Marnani, J.A. and Rohanimanesh, M.S. (2021), "Seismic performance assessment of a novel ductile steel braced frame equipped with steel curved damper", Struct., 31, 87-97. https://doi.org/10.1016/j.istruc.2021.01.073.
  23. Ghazanfari, A., Assempour, A., Habibi, M. and Hashemi, R. (2016), "Investigation on the effective range of the through thickness shear stress on forming limit diagram using a modified Marciniak-Kuczynski model", Modare. Mech. Eng., 16(1), 137-143.
  24. Guo, Y., Mi, H. and Habibi, M. (2021), "Electromechanical energy absorption, resonance frequency, and low-velocity impact analysis of the piezoelectric doubly curved system", Mech. Syst. Signal. Pr., 157, 107723. https://doi.org/10.1016/j.ymssp.2021.107723.
  25. Habibi, M., Darabi, R., Sa, J.C.D. and Reis, A. (2021), "An innovation in finite element simulation via crystal plasticity assessment of grain morphology effect on sheet metal formability", Proc. Inst. Mech. Eng. Part L, J. Mater. Des. Appl., 235(8), 1937-1951. https://doi.org/10.12989/anr.2021.11.2.219.
  26. Habibi, M., Hashemi, R., Ghazanfari, A., Naghdabadi, R. and Assempour, A. (2018a), "Forming limit diagrams by including the M-K model in finite element simulation considering the effect of bending", Proc. Inst. Mech. Eng. Part L, J. Mater. Des. Appl., 232(8), 625-636. https://doi.org/10.1177%2F1464420716642258. https://doi.org/10.1177%2F1464420716642258
  27. Habibi, M., Hashemi, R., Sadeghi, E., Fazaeli, A., Ghazanfari, A. and Lashini, H. (2016), "Enhancing the mechanical properties and formability of low carbon steel with dual-phase microstructures", J. Mater. Eng. Perform., 25(2), 382-389. https://doi.org/10.1007/s11665-016-1882-1.
  28. Habibi, M., Hashemi, R., Tafti, M.F. and Assempour, A. (2018b), "Experimental investigation of mechanical properties, formability and forming limit diagrams for tailor-welded blanks produced by friction stir welding", J. Manuf. Proc., 31, 310-323. https://doi.org/10.1016/j.jmapro.2017.11.009.
  29. Harris, E.C. and von Nad, J.D. (1985), "Experimental determination of effective weight of stored material for use in seismic design of silos", J. Proc., 82(6), 828-833.
  30. Hashemi, H.R., Alizadeh, A.A., Oyarhossein, M.A., Shavalipour, A., Makkiabadi, M. and Habibi, M. (2019), "Influence of imperfection on amplitude and resonance frequency of a reinforcement compositionally graded nanostructure", Wave. Random Complex Media, 1-27. http://doi.org/10.1080/17455030.2019.1662968.
  31. Holler, S. and Meskouris, K. (2006), "Granular material silos under dynamic excitation: numerical simulation and experimental validation", J. Struct. Eng., 132(10), 1573-1579. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:10(1573).
  32. Hosseini, S., Habibi, M. and Assempour, A. (2018), "Experimental and numerical determination of forming limit diagram of steel-copper two-layer sheet considering the interface between the layers", Modare. Mech. Eng., 18(6), 174-181.
  33. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  34. Hou, F., Wu, S., Moradi, Z. and Shafiei, N. (2021), "The computational modeling for the static analysis of axially functionally graded micro-cylindrical imperfect beam applying the computer simulation", Eng. Comput., 1-19. https://doi.org/10.1016/j.compstruct.2021.114438.
  35. Hu, X., Ma, P., Gao, B. and Zhang, M. (2019), "An integrated step-up inverter without transformer and leakage current for grid-connected photovoltaic system", IEEE Transac. Power Elec., 34(10), 9814-9827. https://doi.org/10.1109/TPEL.2019.2895324.
  36. Huang, X., Zhang, Y., Moradi, Z. and Shafiei, N. (2021a), "Computer simulation via a couple of homotopy perturbation methods and the generalized differential quadrature method for nonlinear vibration of functionally graded non-uniform micro-tube", Eng. Comput., 1-18. https://doi.org/10.1007/s00366-020-01188-4.
  37. Huang, X., Zhu, Y., Vafaei, P., Moradi, Z. and Davoudi, M. (2021b), "An iterative simulation algorithm for large oscillation of the applicable 2D-electrical system on a complex nonlinear substrate", Eng. Comput., 1-13. https://doi.org/10.1007/s00366-021-01320-y.
  38. Huang, Z., Yi, S., Chen, H. and He, X. (2019), "Parameter analysis of damaged region for laminates with matrix defects", J. Sandw. Struct. Mater., 23(2), 580-620. https://doi.org/10.1177/1099636219842290.
  39. Huo, J., Zhang, G., Ghabussi, A. and Habibi, M. (2021), "Bending analysis of FG-GPLRC axisymmetric circular/annular sector plates by considering elastic foundation and horizontal friction force using 3D-poroelasticity theory", Compos. Struct., 276, 114438. https://doi.org/10.1016/j.compstruct.2021.114438.
  40. Jahandari, S., Tao, Z., Saberian, M., Shariati, M., Li, J., Abolhasani, M., Kazemi, M., Rahmani, A. and Rashidi, M. (2021), "Geotechnical properties of lime-geogrid improved clayey subgrade under various moisture conditions", Road Mater. Pavement Des., 1-19. https://doi.org/10.12989/scs.2021.40.6.853.
  41. Jiao, J., Ghoreishi, S.M., Moradi, Z. and Oslub, K. (2021), "Coupled particle swarm optimization method with genetic algorithm for the static-dynamic performance of the magneto-electro-elastic nanosystem", Eng. Comput., 1-15.
  42. Kamyab, H., Friedler, F., Klemes, J.J., Chelliapan, S. and Rezania, S. (2018), "Bioenergy production and nutrients removal by green microalgae with cultivation from agro-wastewater palm oil mill effluent (POME)-a review", Chem. Eng. Tran., 70, 2197-2202. https://doi.org/10.3303/CET1870367.
  43. Karimi, H., Rahmani, R., Othman, M.F., Zohoori, B., Mahrami, M., Kamyab, H. and Hosseini, S.E. (2016), "An analytical approach to calculate the charge density of biofunctionalized graphene layer enhanced by artificial neural networks", Plasmonics, 11(1), 95-102. http://doi.org/10.1007/s11468-015-9998-y.
  44. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://doi.org/10.12989/eas.2017.13.6.531.
  45. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  46. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N. (2015), "Behavior of tilted angle shear connectors", PLoS one, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  47. Li, D., Zhang, J.F., Wang, C.W. and Jiang, F.X. (2019), "Propagation patterns of microseismic waves in rock strata during mining: an experimental study", Int. J. Min. Metal. Mater., 26(5), 531-537. https://doi.org/10.1007/s12613-019-1761-5.
  48. Li, G., Sun, Y. and Qi, C. (2021a), "Machine learning-based constitutive models for cement-grouted coal specimens under shearing", Int. J. Min. Sci. Tech., 31(5), 813-823. https://doi.org/10.1016/j.ijmst.2021.08.005.
  49. Li, H.W., Gao, Y.F., Du, C.H. and Hong, W.P. (2021b), "Numerical study on swirl cooling flow, heat transfer and stress characteristics based on fluid-structure coupling method under different swirl chamber heights and Reynolds numbers", Int. J. Heat Mass Transf., 173, 121228. https://doi.org/10.1016/j.ijheatmasstransfer.2021.121228.
  50. Li, J., Tang, F. and Habibi, M. (2020a), "Bi-directional thermal buckling and resonance frequency characteristics of a GNP-reinforced composite nanostructure", Eng. Comput., 1-22.
  51. Li, Y., Li, S., Guo, K., Fang, X. and Habibi, M. (2020b), "On the modeling of bending responses of graphene-reinforced higher order annular plate via two-dimensional continuum mechanics approach", Eng. Comput., 1-22.
  52. Li, Y., Ren, X., Zhao, T., Xiao, D., Liu, K. and Fang, D. (2021c), "Dynamic response of stiffened plate under internal blast: Experimental and numerical investigation", Mar. Struct., 77, 102957. http://doi.org/10.1016/j.marstruc.2021.102957.
  53. Lin, X.M., Kireeva, N., Timoshin, A., Naderipour, A., Abdul-Malek, Z. and Kamyab, H. (2021), "A multi-criteria framework for designing of stand-alone and grid-connected photovoltaic, wind, battery clean energy system considering reliability and economic assessment", Energy, 224, 120154. https://doi.org/10.1016/j.energy.2021.120154.
  54. Litang, W.M.S.F.G., Kai, J.C.T. and Shujiang, G. (2005), "Study of earthquake action and tests of multi-silo supported by cylinder", Ind. Constr., 10.
  55. Liu, H., Zhao, Y., Pishbin, M., Habibi, M., Bashir, M. and Issakhov, A. (2021a), "A comprehensive mathematical simulation of the composite size-dependent rotary 3D microsystem via two-dimensional generalized differential quadrature method", Eng. Comput., 1-16.
  56. Liu, Y., Wang, W., He, T., Moradi, Z. and Larco Benitez, M.A. (2021b), "On the modelling of the vibration behaviors via discrete singular convolution method for a high-order sector annular system", Eng. Comput., 1-23.
  57. Liu, Z., Su, S., Xi, D. and Habibi, M. (2020a), "Vibrational responses of a MHC viscoelastic thick annular plate in thermal environment using GDQ method", Mech. Base. Des. Struct. Mach., 1-26. https://doi.org/10.1080/15397734.2020.1784201.
  58. Liu, Z., Wu, X., Yu, M. and Habibi, M. (2020b), "Large-amplitude dynamical behavior of multilayer graphene platelets reinforced nanocomposite annular plate under thermomechanical loadings", Mech. Base. Des. Struct. Mach., 1-25. https://doi.org/10.1080/15397734.2020.1815544.
  59. Ma, L., Liu, X. and Moradi, Z. (2021a), "On the chaotic behavior of graphene-reinforced annular systems under harmonic excitation", Eng. Comput., 1-25.
  60. Ma, R., Karimzadeh, M., Ghabussi, A., Zandi, Y., Baharom, S., Selmi, A. and Maureira-Carsalade, N. (2021b), "Assessment of composite beam performance using GWO-ELM metaheuristic algorithm", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01363-1.
  61. Mehrabi, P., Shariati, M., Kabirifar, K., Jarrah, M., Rasekh, H., Trung, N.T., Shariati, A. and Jahandari, S. (2021), "Effect of pumice powder and nano-clay on the strength and permeability of fiber-reinforced pervious concrete incorporating recycled concrete aggregate", Constr. Build. Mater., 287, 122652. https://doi.org/10.1016/j.conbuildmat.2021.122652.
  62. Mi, C., Huang, Y., Fu, C., Zhang, Z. and Postolache, O. (2021), "Vision-based measurement: actualities and developing trends in automated container terminals", IEEE Inst. Meas. Mag., 24(4), 65-76. https://doi.org/10.1109/MIM.2021.9448257.
  63. Mishra, A.R., Mardani, A., Rani, P., Kamyab, H. and Alrasheedi, M. (2021), "A new intuitionistic fuzzy combinative distance-based assessment framework to assess low-carbon sustainable suppliers in the maritime sector", Energy, 237, 121500. https://doi.org/10.1016/j.energy.2021.121500.
  64. Moayedi, H., Darabi, R., Ghabussi, A., Habibi, M. and Foong, L.K. (2020), "Weld orientation effects on the formability of tailor welded thin steel sheets", Thin. Wall. Struct., 149, 106669. https://doi.org/10.1016/j.tws.2020.106669.
  65. Moradi, Z., Davoudi, M., Ebrahimi, F. and Ehyaei, A.F. (2021), "Intelligent wave dispersion control of an inhomogeneous micro-shell using a proportional-derivative smart controller", Wave. Random Complex Media, 1-24. https://doi.org/10.1080/17455030.2021.1926572.
  66. Morasaei, A., Ghabussi, A., Aghlmand, S., Yazdani, M., Baharom, S. and Assilzadeh, H. (2021), "Simulation of steel-concrete composite floor system behavior at elevated temperatures via multi-hybrid metaheuristic framework", Eng. Comput., 1-16.
  67. Mou, B. and Bai, Y. (2018), "Experimental investigation on shear behavior of steel beam-to-CFST column connections with irregular panel zone", Eng. Struct., 168, 487-504. https://doi.org/10.1016/j.engstruct.2018.04.029.
  68. Mousavi, A.A., Zhang, C., Masri, S.F. and Gholipour, G. (2021), "Structural damage detection method based on the complete ensemble empirical mode decomposition with adaptive noise: A model steel truss bridge case study", Struct. Health Monit., 14759217211013535. https://doi.org/10.1177/14759217211013535.
  69. Naderipour, A., Abdul-Malek, Z., Arshad, R.N., Kamyab, H., Chelliapan, S., Ashokkumar, V. and Tavalaei, J. (2021a), "Assessment of carbon footprint from transportation, electricity, water, and waste generation: towards utilisation of renewable energy sources", Clean Technol. Env. Policy, 23(1), 183-201. https://doi.org/10.1007/s10098-020-02017-4
  70. Naderipour, A., Abdul-Malek, Z., Noorden, Z.A., Davoudkhani, I. F., Nowdeh, S.A., Kamyab, H., Chelliapan, S. and Ghiasi, S.M.S. (2021b), "Carrier wave optimization for multi-level photovoltaic system to improvement of power quality in industrial environments based on Salp swarm algorithm", Env. Technol. Innov., 21, 101197. http://doi.org/10.1016/j.eti.2020.101197.
  71. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  72. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347. https://doi.org/10.12989/scs.2020.34.3.347.
  73. Najaafi, N., Jamali, M., Habibi, M., Sadeghi, S., Jung, D.W. and Nabipour, N. (2020), "Dynamic instability responses of the substructure living biological cells in the cytoplasm environment using stress-strain size-dependent theory", J. Biomol. Struct. Dyn., 1-12. https://doi.org/10.1080/07391102.2020.1751297.
  74. Nilashi, M., Rupani, P.F., Rupani, M.M., Kamyab, H., Shao, W., Ahmadi, H., Rashid, T.A. and Aljojo, N. (2019), "Measuring sustainability through ecological sustainability and human sustainability: A machine learning approach", J. Clean. Prod., 240, 118162. http://doi.org/10.1016/j.jclepro.2019.118162.
  75. Nouri, K., Sulong, N.R., Ibrahim, Z. and Shariati, M. (2021), "Behaviour of novel stiffened angle shear connectors at ambient and elevated temperatures", Adv. Steel Constr., 17(1), 28-38. http://doi.org/10.18057/IJASC.2021.17.1.4.
  76. Peng, D., Chen, S., Darabi, R., Ghabussi, A. and Habibi, M. (2021), "Prediction of the bending and out-of-plane loading effects on formability response of the steel sheets", Arch. Civil Mech. Eng., 21(2), 1-13. https://doi.org/10.1007/s43452-021-00227-1.
  77. Qi, C., Spagnoli, D. and Fourie, A. (2020), "DFT-D study of single water adsorption on low-index surfaces of calcium silicate phases in cement", Appl. Surf. Sci., 518, 146255. https://doi.org/10.1016/j.apsusc.2020.146255.
  78. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  79. Rezania, S., Kamyab, H., Rupani, P.F., Park, J., Nawrot, N., Wojciechowska, E., Yadav, K.K., Ghahroud, M.L., Mohammadi, A.A. and Thirugnana, S.T. (2021), "Recent advances on the removal of phosphorus in aquatic plant-based systems", Env. Technol. Innov., 101933. https://doi.org/10.1016/j.eti.2021.101933.
  80. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533. https://doi.org/10.12989/gae.2019.19.6.533.
  81. Sarkar, J. and Das, D. (2019), "Enhanced strength in novel nanocomposites prepared by reinforcing graphene in red soil and fly ash bricks", Int. J. Min. Metal. Mater., 26(10), 1322-1328. http://doi.org/10.1007/s12613-019-1835-4.
  82. Selvama, S.B., Chelliapanb, S., Dinc, M.F.M., Kamyabb, H., Albatib, S.K., Othmanb, N., Yuzird, A. and Nasrie, N.S. (2019), "Landfill leachate treatment by an anaerobic process enhanced with recyclable uniform beads (RUB) of seaweed species of Gracilaria", Desal. Water Treat., 143, 208-216. http://doi.org/10.5004/dwt.2019.23520.
  83. Sezen, H., Livaoglu, R. and Dogangun, A. (2008), "Dynamic analysis and seismic performance evaluation of above-ground liquid-containing tanks", Eng. Struct., 30(3), 794-803. https://doi.org/10.1016/j.engstruct.2007.05.002.
  84. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016a), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin. Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  85. Shah, S., Sulong, N.R., Jumaat, M. and Shariati, M. (2016b), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal. 2016.04.017.
  86. Shao, Y., Zhao, Y., Gao, J. and Habibi, M. (2021), "Energy absorption of the strengthened viscoelastic multi-curved composite panel under friction force", Arch. Civil Mech. Eng., 21(4), 1-29. https://doi.org/10.1080/17455030.2021.1926572.
  87. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  88. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020a), "On the vibrations and stability of moving viscoelastic axially functionally graded nanobeams", Mater., 13(7), 1707. https://doi.org/10.3390/ma13071707.
  89. Shariati, A., Mohammad-Sedighi, H., Zur, K.K., Habibi, M. and Safa, M. (2020b), "Stability and dynamics of viscoelastic moving rayleigh beams with an asymmetrical distribution of material parameters", Symmetry, 12(4), 586. https://doi.org/10.3390/sym12040586.
  90. Shariati, M. (2008), "Assessment building using none-destructive test techniques (ultra sonic pulse velocity and Schmidt rebound hammer)", Ph.D. Dissertation of Philosophy, Universiti Putra Malaysia.
  91. Shariati, M. (2013), "Behaviour of C-shaped shear connectors in stell concrete composite beams", Ph.D. Dissertation of Philosophy, Universiti Malaysia.
  92. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473-484. https://doi.org/10.12989/gae.2020.19.6.473.
  93. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020c), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  94. Shariati, M., Davoodnabi, S.M., Toghroli, A., Kong, Z. and Shariati, A. (2021), "Hybridization of metaheuristic algorithms with adaptive neuro-fuzzy inference system to predict load-slip behavior of angle shear connectors at elevated temperatures", Compos. Struct., 278, 114524. https://doi.org/10.1016/j.compstruct.2021.114524.
  95. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020d), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  96. Shariati, M., Grayeli, M., Shariati, A. and Naghipour, M. (2020e), "Performance of composite frame consisting of steel beams and concrete filled tubes under fire loading", Steel Compos. Struct., 36(5), 587-602. https://doi.org/10.12989/scs.2020.36.5.587.
  97. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019b), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  98. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020f), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  99. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020g), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377. https://doi.org/10.12989/scs.2020.34.3.377.
  100. Shariati, M., Shariati, A., Trung, N.T., Shoaei, P., Ameri, F., Bahrami, N. and Zamanabadi, S.N. (2020h), "Alkali-activated slag (AAS) paste: Correlation between durability and microstructural characteristics", Constr. Build. Mater., 267, 120886. https://doi.org/10.1016/j.conbuildmat.2020.120886.
  101. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal. 2017.08.014.
  102. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020i), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  103. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019c), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  104. Shi, X., Li, J. and Habibi, M. (2020), "On the statics and dynamics of an electro-thermo-mechanically porous GPLRC nanoshell conveying fluid flow", Mech. Base. Des. Struct. Mach., 1-37. https://doi.org/10.1080/15397734.2020.1772088.
  105. Shimamoto, A., Kodama, M. and Yamamura, M. (1984), "Vibration tests for scale model of cylindrical coal storing silo", Proc. 8th World Conf. Earthq. Eng., San Francisco, CA, USA.
  106. Shujiang, G. and Mingping, G.L.W. (2000), "Experimental study of natural vibration characteristics of cylinder multi silos supported by silos wall themselves", Ind. Constr., 1.
  107. Shuming, W. and Daying, Z. (2017), "Dynamic interaction analysis of the individuals belong to empty group silos", Hubei Agr. Sci., 56(9), 1742-1744.
  108. Silvestri, S., Ivorra, S., Chiacchio, L.D., Trombetti, T., Foti, D., Gasparini, G., Pieraccini, L., Dietz, M. and Taylor, C. (2016), "Shaking-table tests of flat-bottom circular silos containing grain-like material", Earthq. Eng. Struct. Dyn., 45(1), 69-89. https://doi.org/10.1002/eqe.2617.
  109. Sun, J., Aslani, F., Wei, J. and Wang, X. (2021), "Electromagnetic absorption of copper fiber oriented composite using 3D printing", Constr. Build. Mater., 300, 124026. https://doi.org/10.1016/j.conbuildmat.2021.124026.
  110. Tu, P. and Vimonsatit, V. (2017), "Silo quaking of iron ore train load out bin-A time-varying mass structural dynamic problem", Adv. Powder Technol., 28(11), 3014-3025. https://doi.org/10.1016/j.apt.2017.09.012.
  111. Wang, L., Peng, Y., Xie, Y., Chen, B. and Du, Y. (2021), "A new iteration regularization method for dynamic load identification of stochastic structures", Mech. Syst. Signal. Pr., 156, 107586. https://doi.org/10.1016/j.ymssp.2020.107586.
  112. Wang, L., Zhang, H. and Lu, W. (2010), "Study of shaking table tests on the model of group silos structures", Build. Struct., 40(10), 41-43.
  113. Wang, X., Yang, Z., Shu, X. and Feng, J. (2013), "The static contact statuses between granular materials and flat-bottomed steel silos", Powder Technol., 235, 1053-1059. https://doi.org/10.1016/j.powtec.2012.10.052.
  114. Wang, Z., Yu, S., Xiao, Z. and Habibi, M. (2020), "Frequency and buckling responses of a high-speed rotating fiber metal laminated cantilevered microdisk", Mech. Adv. Mater. Struct., 1-14. https://doi.org/10.1080/15376494.2020.1824284.
  115. Wu, J. and Habibi, M. (2021), "Dynamic simulation of the ultrafast-rotating sandwich cantilever disk via finite element and semi-numerical methods", Eng. Comput., 1-17. https://doi.org/10.1007/s00366-021-01396-6.
  116. Xu, J., Wu, Z., Chen, H., Shao, L., Zhou, X. and Wang, S. (2021a), "Triaxial shear behavior of basalt fiber-reinforced loess based on digital image technology", KSCE J. Civil Eng., 25, 3714-3726. https://doi.org/10.1007/s12205-021-2034-1.
  117. Xu, W., Pan, G., Moradi, Z. and Shafiei, N. (2021b), "Nonlinear forced vibration analysis of functionally graded non-uniform cylindrical microbeams applying the semi-analytical solution", Compos. Struct., 275, 114395. https://doi.org/10.1016/j.compstruct.2021.114395.
  118. Yan, D., Wang, W. and Chen, Q. (2020), "Fractional-order modeling and nonlinear dynamic analyses of the rotor-bearing-seal system", Chaos Soliton. Fractal., 133, 109640. https://doi.org/10.1016/j.chaos.2020.109640.
  119. Yavari, S., Asadpour, R., Kamyab, H., Yavari, S., Kutty, S.R.M., Baloo, L., Abd Manan, T.S.B., Chelliapan, S. and Sidik, A.B.C. (2021), "Efficiency of carbon sorbents in mitigating polar herbicides leaching from tropical soil", Clean Technol. Env. Policy, 1-10. https://doi.org/10.1007/s10098-021-02113-z.
  120. Yu, X., Maalla, A. and Moradi, Z. (2022), "Electroelastic high-order computational continuum strategy for critical voltage and frequency of piezoelectric NEMS via modified multi-physical couple stress theory", Mech. Syst. Signal. Pr., 165, 108373. https://doi.org/10.1016/j.ymssp.2021.108373.
  121. Yue, C.S., Peng, B., Tian, W., Lu, G.H., Qiu, G.B. and Zhang, M. (2019), "Complete stabilization of severely As-contaminated soil by a simple H2 O2 pre-oxidation method combined with non-toxic TMT-15 and FeCl3.6H 2O", Int. J. Min. Metal Mater., 26(9), 1105-1112. https://doi.org/10.1007/s12613-019-1819-4.
  122. Zhang, L., Chen, Z., Habibi, M., Ghabussi, A. and Alyousef, R. (2021a), "Low-velocity impact, resonance, and frequency responses of FG-GPLRC viscoelastic doubly curved panel", Compos. Struct., 269, 114000. https://doi.org/10.1016/j.compstruct.2021.114000.
  123. Zhang, T., Wu, X., Shaheen, S. M., Rinklebe, J., Bolan, N.S., Ali, E.F., Li, G. and Tsang, D.C. (2021b), "Effects of microorganism-mediated inoculants on humification processes and phosphorus dynamics during the aerobic composting of swine manure", J. Hazard. Mater., 416, 125738. https://doi.org/10.1016/j.jhazmat.2021.125738.
  124. Zhang, X., Shamsodin, M., Wang, H., NoormohammadiArani, O., Khan, A.M., Habibi, M. and Al-Furjan, M. (2021c), "Dynamic information of the time-dependent tobullian biomolecular structure using a high-accuracy size-dependent theory", J. Biomol. Struct. Dyn., 39(9), 3128-3143. https://doi.org/10.1080/07391102.2020.1760939.
  125. Zhao, X., Chen, B., Li, Y., Zhu, W., Nkiegaing, F. and Shao, Y. (2020a), "Forced vibration analysis of Timoshenko double-beam system under compressive axial load by means of Green's functions", J. Sound Vib., 464, 115001. https://doi.org/10.1016/j.jsv.2019.115001.
  126. Zhao, X., Zhu, W. and Li, Y. (2020b), "Analytical solutions of nonlocal coupled thermoelastic forced vibrations of micro-/nano-beams by means of Green's functions", J. Sound Vib., 481, 115407. https://doi.org/10.1016/j.jsv.2020.115407.
  127. Zhao, Y., Moradi, Z., Davoudi, M. and Zhuang, J. (2021), "Bending and stress responses of the hybrid axisymmetric system via state-space method and 3D-elasticity theory", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01242-1.
  128. Zhou, C., Zhao, Y., Zhang, J., Fang, Y. and Habibi, M. (2020), "Vibrational characteristics of multi-phase nanocomposite reinforced circular/annular system", Ad. Nano Res., 9(4), 295-307. https://doi.org/10.12989/anr.2020.9.4.295.