Advances in concrete construction

  • 제12권5호
  • /
  • Pages.367-375
  • /
  • 2021
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Improvement of bond strength and durability of concrete incorporating high volumes of class F fly ash

  • Wu, Chung-Hao (Department of Civil Engineering, Chung Yuan Christian University) ;
  • Chen, Chien-Jung (Architecture and Building Research Institute, Ministry of the Interior) ;
  • Lin, Yu-Feng (Department of Civil Engineering, Chienkuo Technology University) ;
  • Lin, Shu-Ken (Department of Civil Engineering, National Chung Hsing University)
  • 투고 : 2020.02.23
  • 심사 : 2021.09.28
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This study experimentally investigated the improvement of bond strength and durability of concrete containing high volume fly ash. Concrete mixtures made with 0%, 25% and 60% replacement of cement with class F fly ash were prepared. Water-binder ratios ranged from 0.28 to 0.72. The compressive, flexural and pullout bond strength, the resistance to chloride-ion penetration, and the water permeability of concrete were measured and presented. Test results indicate that except for the concretes at early ages, the mechanical properties, bond strength, and the durability-related chloride-ion permeability and water permeability of concrete containing high volume (60% cement replacement) fly ash were obviously superior to the concrete without fly ash at later ages of beyond 56 days. The enhanced bond strength for the high volume fly-ash concrete either with or without steel confinement is a significant finding which might be valuable for the structural application.

키워드

참고문헌

  1. Bouzoubaa, N., Zhang, M.H. and Malhotra, V.M. (2001), "Mechanical properties and durability properties of concrete made with high-volume fly ash blended cements using a coarse fly ash", Cement Concrete Res., 31(10), 1393-1402. https://doi.org/10.1016/S0008-8846(01)00592-0.
  2. Bouzoubaa, N., Zhang, M.H. Bilodeau, A. and Malhotra, V.M. (2000), "Laboratory-produced high-volume fly ash blended cements compressive strength and resistance to the chloride-ion penetration of concrete", Cement Concrete Res., 30(7), 1037-1046. https://doi.org/10.1016/S0008-8846(00)00299-4.
  3. Bouzoubaa, N., Zhang, M.H., Bilodeau, A. and Malhotra, V.M. (1998), "Laboratory-produced high-volume fly ash blended cements: Physical properties and compressive strength of mortars", Cement Concrete Res., 28(11), 1555-1569. https://doi.org/10.1016/S0008-8846(98)00132-X.
  4. Ghafoori, N., Najimi, M., Diawara, H. and Islam, M.S. (2015), "Effects of class F fly ash on sulfate resistance of Type V Portland cement concretes under continuous and interrupted sulfate exposures", Constr. Build. Mater., 78(1), 85-91. https://doi.org/10.1016/j.conbuildmat.2015.01.004.
  5. Gopalakrishnan, S. (2005), "Demonstration of utilizing high volume fly ash based concrete for structural applications", Struct. Eng. Res. Centre, Chennai, India.
  6. Huang, C.H., Lin, S.K., Chang, C.S. and Chen, H.J. (2013), "Mix proportion and mechanical properties of concrete containing very high volume of Class F fly ash", Constr. Build. Mater., 46, 71-78. https://doi.org/10.1016/j.conbuildmat.2013.04.016.
  7. Krishna, Teja K. and Kameswara, Rao B. (2018), "Strength and durability of high volume fly ash concrete", Int. J. Civil Eng. Tech., 9(6), 109-116.
  8. Kurtoglu, A.E., Alzeebaree, R., Aljumaili, O., Nis, A., Gulsan, M.E., Humur, G. and Cevik, A. (2018), "Mechanical and durability properties of fly ash and slag based geopolymer concrete", Adv. Concrete Constr., 6(4), 345-362. https://doi.org/10.12989/acc.2018.6.4.345.
  9. Langley, W.S., Carette, G.G. and Malhotra, V.M. (1989), "Structural concrete incorporating high volume of ASTM class F fly ash", ACI Mater. J., 86(5), 507-514.
  10. Looney, T.J., Arezoumandi, M., Volz, J.S. and Myers, J.J. (2012), "An experimental study on bond strength of reinforcing steel in high-volume fly-ash concrete", Adv. Civil Eng. Mater., 1(1), 1-17. https://doi.org/10.1520/ACEM20120026.
  11. Malhotra, V.M. and Painter, K.E. (1989), "Early-age strength properties, and freezing and thawing resistance of concrete incorporating high volumes of ASTM class F fly ash", Int. J. Cement Compos. Lightweight Concrete, 11(1), 37-46. https://doi.org/10.1016/0262-5075(89)90034-1.
  12. Mukherjee, P.K., Loughborough, M.T. and Malhotra, V.M. (1982), "Development of high strength concrete incorporating a large percentage of fly ash and superplasticizers", Cement Concrete Aggregate, 4(2), 81-86. https://doi.org/10.1520/CCA10232J.
  13. Naik, T.R. and Ramme, B.W. (1957), "Setting and hardening of high fly ash content concrete", American Coal Ash Association's 8th International Coal Ash Utilization Symposium, Washington, October.
  14. Naik, T.R. and Ramme, B.W. (1989), "High strength concrete containing large quantities of fly ash", ACI Mater. J., 86(2), 111-117.
  15. Naik, T.R., Singh, S.S. and Sivasundaram, V. (1989), "Concrete compressive strength, shrinkage and bond strength as affected by addition of fly ash and temperature", University Wisconsin-Milwaukee.
  16. Poon, C.S. (2000), "Study on high strength concrete prepared with large volumes of low-calcium fly ash", Cement Concrete Res., 30(3), 447-455. https://doi.org/10.1016/S0008-8846(99)00271-9.
  17. Sadrmomtazi, A., Tahmouresi, B. and Amooie, M. (2017), "Permeability and mechanical properties of binary and ternary cementitious mixtures", Adv. Concrete Constr., 5(5), 423-436. https://doi.org/10.12989/acc.2017.5.5.423.
  18. Sukumar, B., Nagamani, K. and Indumathi, M. (2006), "Rational mix design method for self-compacting concrete", Proceedings National Conference Concrete Technology, Tamil Nadu, September.
  19. Sukumar, B., Nagamani, K. and Raghavan, R.S. (2008), "Evaluation of strength at early ages of self-compacting concrete with high volume fly ash", Constr. Build. Mater., 22, 1394-1401. https://doi.org/10.1016/j.conbuildmat.2007.04.005.
  20. Swamy, R.N. and Mahmud, H.B. (1986), "Mix proportions and strength characteristics of concrete containing 50 percent low-calcium fly ash", Spec. Pub., 91, 413-32.
  21. Xiong, C.S., Jiang, L.H., Xu, Y., Song, Z.J., Chu, H.Q. and Guo, Q.X. (2016), "Influences of exposure condition and sulfate salt type on deterioration of paste with and without fly ash", Constr. Build. Mater., 113(15), 951-963. https://doi.org/10.1016/j.conbuildmat.2016.03.154.
  22. Zhang, W.M., Zhang, Y.C. and Gao, L.X. (2019), "Effect of low-calcium fly ash on sulfate resistance of cement paste under different exposure conditions", Adv. Concrete Constr., 7(3), 175-181. https://doi.org/10.12989/acc.2019.7.3.175.