Advances in concrete construction

  • 제12권5호
  • /
  • Pages.419-427
  • /
  • 2021
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Strength properties of concrete with fly ash and silica fume as cement replacing materials for pavement construction

  • 투고 : 2020.02.03
  • 심사 : 2021.11.04
  • 발행 : 2021.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

The overuse level of cement for civil industry has several undesirable social and ecological consequences. Substitution of cement with industrial wastes, called by-products, such as fly ash, ground granulated blast furnace slag, silica fume, metakaoline, rice husk ash, etc. as the mineral admixtures offers various advantages such as technical, economical and environmental which are very important in the era of sustainability in construction industry. The paper presents the experimental investigations for assessing the mechanical properties of the concrete made using the Pozzolanic waste materials (supplementary cementitious materials) such as fly ash and silica fume as the cement replacing materials. These materials were used in eight trial mixes with varying amount of ordinary Portland cement. These SCMs were kept in equal proportions in all the eight trial mixes. The chemical admixture (High Range Water Reducing Admixture) was also added to improve the workability of concrete. The compressive strengths for 7, 28, 40 and 90 days curing were evaluated whereas the flexural and tensile strengths corresponding to 7, 28 and 40 days curing were evaluated. The study corroborates that the Pozzolanic materials used in the present investigation as partial replacement for cement can render the sustainable concrete which can be used in the rigid pavement construction.

키워드

참고문헌

  1. Aggarwal, V. and Gupta, S.M. (2010), "Concrete durability through high volume fly ash concrete (HVFC): A literature review", Int. J. Eng. Sci. Tech., 2(9), 4473-4477.
  2. Ajileye, F.V. (2012), "Investigation on micro-silica (Silica Fume) as partial cement replacement in concrete", Glob. J. Res. Eng. Civil Struct. Eng., 12(1), 1.
  3. Alam, J. and Akhtar, M.N. (2011), "Fly ash utilization in different sectors in Indian scenario", Int. J. Emerg. Trend. Eng. Devel., 1(1), 1-14.
  4. Al-Amoudi, Omar S.B., Ahmad, S., Khan, Saad M.S. and Maslehuddin, M. (2019), "Durability performance of concrete containing Saudi natural pozzolans as supplementary cementitious material", Adv. Concrete Constr., 8(2), 119-126. https://doi.org/10.12989/acc.2019.8.2.119.
  5. Sadrmomtazi, A., Tahmouresi, B. and Kohani Khoshkbijari, R. (2019), "Effect of fly ash and silica fume on transition zone, pore structure and permeability of concrete", Mag. Concrete Res., 70(10), 519-532. https://doi.org/10.1680/jmacr.16.00537.
  6. Ashteyat, A.M and Ismeik, M. (2012), "Strength development models of concrete with silica fume as fine aggregate replacement material", Glob. J. Res. Eng., 12(2), 1.
  7. Bhanja, S. and Sengupta B. (2003), "Optimum silica fume content and its mode of action on concrete", Int. Concrete Res. Inf. Portal, 100(5), 407-412.
  8. Carette, G. and Malhotra, V.M. (1983), "Early age strength development of concrete incorporating fly ash and condensed silica fume", ACI Spec. Publ., 79, 765-784.
  9. Cheng-yi, H. and Feldman, R.F. (1985), "Influence of silica fume on micro-structural development in cement mortars", Cement Concrete Res., 15(2), 285-294. https://10.1016/0008-8846(85)90040-7.
  10. Chore, H.S. and Joshi, M.P. (2015), "Strength evaluation of concrete with fly ash and GGBFS as cement replacing materials", Adv. Concrete Constr., 3(3), 223-236. http://doi.org/10.12989/acc.2015.3.3.223.
  11. Cong, X., Gong, S., Darwin, D. and McCabe, S.L. (1992), "Role of silica fumes on compressive strength of cement paste, mortar and concrete", Mater. J., 89(4), 375-387.
  12. Detwiler, R.J. and Mehta, P.K. (1989), "Chemical and physical effects of silica fume on mechanical behavior of concrete", Mater. J., 86(6), 609-614.
  13. Dhadse, S., Pramila, Kumari and Bhagia, L.J. (2008), "Fly ash characterization, utilization and government initiatives in India", J. Sci. Ind. Res., 67, 11-18.
  14. Dragas, J., Ignjatovic, I., Tosic, N. and Marinkovic, S. (2016), "Mechanical and time- dependent properties of high-volume fly ash concrete for structural use", Mag. Concrete Res., 68(12), 632-645. https://doi.org/10.1680/jmacr.15.00384.
  15. Babu, K.G. and Surya, P.V. (1995), "Efficiency of Silica fume in concrete", Cement Concrete Res., 25(6), 1273-1283. https://doi.org/10.1016/0008-8846(95)00120-2.
  16. Ganjigatti, M., Kashinath, B.R. and Prakash, K.B. (2015), "Effect of replacement of cement by different pozzolanic materials on heat of hydration and setting time of concrete", Int. J. Env. Agr. Res., 1(4), 24-29.
  17. Holland, T.C., Detwiler, R. and Aitcin, P.C. (1995), "Abstract of-guide for the use of silica fume in concrete", ACI Mater. J., 92(4), 437-440.
  18. Al-Jumaily, I.A.S., Naji, N. and Kareem, Q. (2015), "An overview on the influence of pozzolanic materials on properties of concrete", Int. J. Enhance. Res. Sci. Technol. Eng., 4(3), 81-92.
  19. Imam, A., Kumar V. and Srivastava, V. (2018), "Review study towards effect of silica fume on fresh and hardened properties of concrete", Adv. Concrete Constr., 6(2), 145-157. https://doi.org/10.12989/acc.2018.6.2.145.
  20. IRC:44 (2008), Guidelines for Cement Concrete Mix Design for Pavements (Second revision), Indian Roads Congress, New Delhi, India.
  21. IRC:58 (2015), Guidelines for the Design of Plain Jointed Rigid Pavements for Highways (Fourth revision), Indian Roads Congress, New Delhi, India.
  22. IS:516 (1959), Methods of Tests for Strength of Concrete, Bureau of Indian Standards (BIS), New Delhi, India. (Reaffirmed 2004)
  23. IS:3812 (1091), Specifications for Pulverized Fuel Ash, Bureau of Indian Standards (BIS), New Delhi, India. (Reaffirmed 2013)
  24. IS:10262 (1982), Recommended Guidelines for Concrete Mix Design, Bureau of Indian Standards (BIS), New Delhi, India. (Reaffirmed 1999)
  25. IS:12089 (1987), Specification for Granulated Slag for Manufacture of Portland Slag Cement, Bureau of Indian Standards (BIS), New Delhi, India.
  26. IS:12269 (1987), Specification for 53 Grade Ordinary Portland Cement (with Amendment No.3), Bureau of Indian Standards (BIS), New Delhi, India. (Reaffirmed 2013)
  27. IS:9013 (1999), Specification for Admixture for Concrete, Bureau of Indian Standards (BIS), New Delhi, India.
  28. IS:5816 (1999), Splitting Tensile Strength of Concrete-Method of Test, Bureau of Indian Standards (BIS), New Delhi, India. (Reaffirmed 2004)
  29. IS:456 (2000), Plain and Reinforced Concrete Code of Practice (Fourth revision), Bureau of Indian Standards (BIS), New Delhi, India.
  30. Jena, T. and Panda, K.C. (2018), "Mechanical and durability properties of marine concrete using fly ash and silpozz", Adv. Concrete Constr., 6(1), 47-68. https://doi.org/10.12989/acc.2018.6.1.047.
  31. Khedre, S.A and Idriss, A.F. (1995), "Resistance of silica fume concrete to corrosion related damage", J. Mater. Civil Eng., 7(2), 102-107. https://doi.org/10.1061/(ASCE)0899-1561(1995)7:2(102).
  32. Kohubu, M. (1969), "Fly ash and fly ash cement", Proc. Fifth Int. Symp. Chem. Cement Assoc. Jpn., 4, 75-105.
  33. Lam, L., Wong, Y.L. and Poon, C.S. (1998), "Effect of fly ash and silica fume on compressive and fracture behaviors of concrete", Cement Concrete Res., 28(2), 271-283. http://doi.org/10.1016/S0008-8846(97)00269-X.
  34. Malhotra, V.M. (1999), "Making concrete 'Greener' with fly ash", Concrete Int., 21(5), 61-66.
  35. Mane, K.M., Kulkarni, D.K. and Prakash, K.B. (2019), "Properties and microstructure of concrete using pozzolanic materials and manufactured sand as partial replacement of fine aggregate", SN Appl. Sci., 1, 1025. https://doi.org/10.1007/s42452-019-1059-2.
  36. Marikunte, S.S. and Nacer, S. (2012), "Interaction of silica fume and water content on strength and permeability of concrete", Transport. Res. Board Annual Meet., 12-1733.
  37. Nicknam, A., Rasa, E. and Ketabchi (2004), "Optimum content of silica fume in cement paste portion of concrete", ACI Student Conferences, San-Fransisco, USA.
  38. Nochaiya, T. and Chaipanich, A. (2010), "Utilization of fly ash with silica fume and properties of Portland cement-fly ash-silica fume concrete", Int. J. Enhance. Res. Sci. Tech. Eng., 89(3), 768-774. https://doi.org/10.1016/j.fuel.2009.10.003.
  39. Obla, K.H. and Russell, L.H. (2003), "Properties of concrete containing ultra-fine fly ash", ACI Mater. J., 100(5), 426-433.
  40. Oluokun, F.A. (1994), "Fly ash concrete mix design and the water-cement ratio law", ACI Mater. J., 91(4), 362-371.
  41. Ozyildirim, C. and Halstead, W.J. (1994), "Improved concrete quality with combination of fly ash and silica fume", ACI Mater. J., 91(6), 587-594.
  42. Paliwal, G. and Maru S. (2017), "Effect of fly ash and plastic waste on mechanical and durability properties of concrete", Adv. Concrete Constr., 5(6), 575-586. https://doi.org/10.12989/acc.2017.5.6.575.
  43. Panjehpour, M., Ali, A. and Demirboga, R. (2011), "A review for characterization of silica fume and its effects on concrete properties", Int. J. Sustain. Constr. Eng. Tech., 2(2), 1-7.
  44. Kumar, V.P. and Prasad, D.R. (2019), "Influence of supplementary cementitious materials on strength and durability characteristics of concrete", Adv. Concrete Constr., 7(2), 75. https://doi.org/10.12989/acc.2019.7.2.075.
  45. Ramkumar, V.R. and Murali, G. and Partheeban A. (2012), "Utilization of silica fume to enhance tensile strength of concrete", Int. J. Emerg. Trend. Civil Eng. Dev., 4(2), 607-609.
  46. Saha, A.K. and Sarker, P.K. (2019), "Durability characteristics of concrete using ferronickel slag fine aggregate and fly ash", Mag. Concrete Res., 70(17), 865-874. https://doi.org/10.1680/jmacr.17.00537.
  47. Saje, D. and Saje, F. (2011), "Compressive strength of concrete containing Silica fume", J. Mech. Behav. Mater., 19(6), 355-364. https://doi.org/10.1515/JMBM.2009.19.6.355
  48. Silva, P. and Brito, J. (2013), "Electrical resistivity and capillarity of Self compacting concrete with incorporation of fly ash and lime stone filler", Adv. Concrete Constr., 1(1), 65-84. https://doi.org/10.12989/acc.2013.1.1.065.
  49. Sunil, B.M., Manjunatha, L.S., Ravi, L. and Yargal, S.C. (2015), "Potential use of mine talings and fly ash in concrete", Adv. Concrete Constr., 3(1), 55-69. http://doi.org/10.12989/acc.2015.3.1.055.
  50. Wild, S., Sabir, B.B. and Khatib, J.M. (1995), "Factors influencing strength development of concrete containing silica fume", Cement Concrete. Res., 25(7), 1567-1580. https://doi.org/10.1016/0008-8846(95)00150-B.