References
- Kwang-Ryeol Lee, Kwang Yong Eun, Inyoung Kim, Jongryoul Kim, Design of W buffer layer for adhesion improvement of DLC films on tool steels, Thin Solid films, 377-378 (2000) 261-268. https://doi.org/10.1016/S0040-6090(00)01429-2
- Junho Choi, Koji Soejima, Takahisa Kato, Masahiro Kawaguchi, Wonsik Lee, Nitriding of high speed steel by bipolar PBII for improvement in adhesion strength of DLC films, Nuclear Instruments and Methods in Physics Research, B 272 (2012) 357-360.
- Takanori Takeno, Toshifumi Sugawara, Hiroyuki Miki, Toshiyuki Takagi, Deposition of DLC film with adhesive W-DLC layer on stainless steel and its tribological properties, Diamond and Related materials, 18 (2009) 1023-1027. https://doi.org/10.1016/j.diamond.2009.01.029
- Bojan Podgornik, Joze Vizintin, Influence of substrate treatment on the tribological properties of DLC coatings, Diamond and Related Materials 10 (2001) 2232-2237. https://doi.org/10.1016/S0925-9635(01)00514-3
- Jiaren Jiang, R. D. Arnell, Jin Tong, The effect of substrate properties on tribological behaviour of composite DLC coatings, Tribology International, Vol 30 (1997) 613-625. https://doi.org/10.1016/S0301-679X(97)00035-2
- E. Menthe, K.-T. Rie, J. W. Schultze, S. Simson, Structure and properties of plasma-nitrided stainless steel, Surf. Coat. Technol., 74-75 (1995) 412-416. https://doi.org/10.1016/0257-8972(95)08246-8
- E.I. Meletis, A. Erdemir, G. R. Fenske, Tribological characteristics of DLC films and duplex plasma nitriding/DLC coating treatments, Surf. Coat. Technol., 73 (1995) 39-45. https://doi.org/10.1016/0257-8972(94)02375-1
- B. Larisch, U. Brusky, H.-J. Spies, Plasma nitriding of stainless steels at low temperatures, Surf. Coat. Technol., 116-119 (1999) 205-211. https://doi.org/10.1016/S0257-8972(99)00084-5
- A. Ricard, J. Deschamps, J. L. Godard, L. Falk, H. Michel, Nitrogen atoms in Ar-N2 flowing microwave discharges for steel surface nitriding, Mater. Sci. Eng., A 139 (1991) 9-14.
- G. Castro, A. Fernandez-Vicente, J. Cid, Influence of the nitriding time in the wear behaviour of an AISI H13 steel during a crankshaft forging process, Wear, 263 (2007) 1375-1385. https://doi.org/10.1016/j.wear.2007.02.007
- S. Miyagawa, S. Nakao, J. Choi, M. Ikeyama, Y. Miyagawa, Effects of target bias voltage on the electrical conductivity of DLC films deposited by PBII/D with a bipolar pulse, Nuclear Instruments and Methods in Physics Research, B 242 (2006) 346-348.
- Wang Ryeol Kim, Uoo Chang Jung, Hyung Ho Jo, Min Suk Park, Won Sub Chung, Effect of Anode Voltage on Diamond-like Carbon Thin Film Using Linear Ion Source, J. Kor. Inst. Surf. Eng., Vol 42 (2009) 179-185. https://doi.org/10.5695/JKISE.2009.42.4.179
- Ritwik Kumar Roy, Sk. Faruque Ahmed, Jin Woo Yi, Myoung-Woon Moon, Kwang-Ryeol Lee, Youngha Jun, Improvement of adhesion of DLC coating on nitinol substrate by hybrid ion beam deposition technique, Vacuum, 83 (2009) 1179-1183. https://doi.org/10.1016/j.vacuum.2009.03.005
- Heon Woong Choi, Jung-Hae Choi, Kwang-Ryeol Lee, Jae-Pyoung Ahn, Kyu Hwan Oh, Structure and mechanical properties of Ag-incorporated DLC films prepared by a hybrid ion beam deposition system, Thin Solid Films, 516 (2007) 248-251. https://doi.org/10.1016/j.tsf.2007.06.154
- Takayuki Utsumi, Yoshihiro Oka, Etsuo Fujiwara, Mitsuyasu Yatsuzuka, Effect of a hard supra-thick interlayer on adhesion of DLC film prepared with PBIID process, Nuclear Instruments and Methods in Physics Research, B 257 (2007) 706-709.
- Junho Choi, Koji Soejima, Takahisa Kato, Masahiro Kawaguchi, Wonsik Lee, Nitriding of high speed steel by bipolar PBII for improvement in adhesion strength of DLC films, Nuclear Instruments and Methods in Physics Research, B 272 (2012) 357-360.