DOI QR코드

DOI QR Code

Structural performance of novel SCARC column under axial and eccentric loads

  • Zhou, Chunheng (School of Civil and Environmental Engineering, Ningbo University) ;
  • Chen, Zongping (College of Civil Engineering and Architecture, Guangxi University) ;
  • Li, Junhua (School of Civil and Environmental Engineering, Ningbo University) ;
  • Cai, Liping (Department of Mechanical Engineering, University of North Texas) ;
  • Huang, Zhenhua (Department of Mechanical Engineering, University of North Texas)
  • 투고 : 2020.08.11
  • 심사 : 2020.11.15
  • 발행 : 2020.12.10

초록

A novel spiral confined angle-steel reinforced concrete (SCARC) column was developed in this study. A total of 16 specimens were prepared and tested (eight of them were tested under axial loading, the other eight were tested under eccentric loading). The failure processes and load-displacement relationships of specimens under axial and eccentric loads were examined, respectively. The load-carrying capacity and ductility were evaluated by parametric analysis. A calculation approach was developed to predict the axial and eccentric load-carrying capacity of these novel columns. Results showed that the spiral reinforcement provided enough confinement in SCARC columns under axial and low eccentric loads, but was not effective in that under high eccentric loads. The axial load-carrying capacity and ductility of SCARC columns were improved significantly due to the satisfactory confinement from spirals. The outer reinforcement and other construction measures were necessary for SCARC columns to prevent premature spalling of the concrete cover. The proposed calculation approach provided a reliable prediction of the load-carrying capacity of SCARC columns.

키워드

과제정보

The research described in this paper was financially supported by the Foundation of Zhejiang Province (LQ20E080003) Special Fund Project for Bagui Scholars ([2019] No.79) and Systematic Project of Guangxi Key Laboratory of Disaster Prevention and Structural Safety (2019ZDK017).

참고문헌

  1. ACI 318 (2011), Building code requirements for structural concrete and commentary, American Concrete Institute; Farmington Hills, MI, USA.
  2. Campione, G. (2012), "Strength and ductility of R.C. columns strengthened with steel angles and battens", Constr. Build. Mater., 35, 800-807. https://doi.org/10.1016/j.conbuildmat.2012.04.090.
  3. Chen, C., Chen, C. and Thuy, T. (2016), "Role of concrete confinement of wide-flange structural steel shape in steel reinforced concrete columns under cyclic loading", Eng. Struct., 110, 79-87. https://doi.org/10.1016/j.engstruct.2015.12.002.
  4. Dundar, C., Tokgoz, S., Tanrikulu, A.K. and Baran, T., (2008), "Behaviour of reinforced and concrete-encased composite columns subjected to biaxial bending and axial load", Build. Environ. 43(6), 1109-1120. https://doi.org/10.1016/j.buildenv.2007.02.010.
  5. Eom, T.S., Hwang, H.J., Park, H.G., Lee, C.N. and Kim, H.S. (2014), "Flexural test for steel-concrete composite members using prefabricated steel angles", J. Struct. Eng., 140(4), 4013094. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000898.
  6. GB 50010, (2010), Code for design of concrete structures. Ministry of Urban and Rural Development, Beijing, China
  7. GB/T 228, (2002), Metallic materials - Tensile testing at ambient temperature, Standardization Administration, Beijing, China
  8. GB/T 700, (2006), Carbon structural steels, Standardization Administration, Beijing, China
  9. Hindi, R. and Turechek, W. (2008), "Experimental behavior of circular concrete columns under reversed cyclic loading", Constr. Build. Mater., 22(4), 684-693. https://doi.org/10.1016/j.conbuildmat.2006.09.002.
  10. Hwang, H., Eom, T., Park, H., Asce, A.M., Lee, S. and Kim, H. (2013), "Cyclic loading test for beam-column connections of concrete-filled U-shaped steel beams and concrete-encased steel angle columns", J. Struct. Eng., 141(11), 1-12. https://doi.org/10.1061/(ASCE)ST.1943-541X.
  11. Hwang, H., Eom, T., Park, H., Asce, M. and Lee, S. (2016), "Axial load and cyclic lateral load tests for composite columns with steel angles", J. Struct. Eng., 142(5), 1-11. https://doi.org/10.1061/(ASCE)ST
  12. Kim, C.S., Park, H.G., Chung, K.S. and Choi, I.R. (2014), "Eccentric axial load capacity of high-strength steel-concrete composite columns of various sectional shapes", J. Struct. Eng., 140(4), 4013091. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000879.
  13. Kim, H.J., Hwang, H.J. and Park, H.G. (2020), "Eccentric-axialload test for composite columns using bolt-connected steel angles", J. Struct. Eng., 146(9), 04020178. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002699.
  14. Kim, H.J., Hwang, H.J., Park, H.G. and Kim, D.K. (2020), "Concentric axial load test for composite columns using boltconnected steel angles", Eng. Struct., 214, 110650. https://doi.org/10.1016/j.engstruct.2020.110650.
  15. Lai, B., Liew, J.Y.R., Venkateshwaran, A. and Li, S. (2020), "Assessment of high-strength concrete encased steel composite columns subject to axial compression", J. Constr. Steel Res., 164, 105765. https://doi.org/10.1016/j.jcsr.2019.105765.
  16. Lu, X. and Zhou, Y. (2007), "An applied model for steel reinforced concrete columns", Struct. Eng., 27, 697-711. https://doi.org/10.12989/sem.2007.27.6.697.
  17. Ma, Y., Che, Y. and Gong, J. (2012), "Behavior of corrosion damaged circular reinforced concrete columns under cyclic loading", Constr. Build. Mater., 29, 548-556. https://doi.org/10.1016/j.conbuildmat.2011.11.002.
  18. Montuori, R. and Piluso, V. (2009), "Reinforced concrete columns strengthened with angles and battens subjected to eccentric load", Eng. Struct., 31(2), 539-550. https://doi.org/10.1016/j.engstruct.2008.10.005.
  19. Montuori, R., Piluso, V. and Tisi, A. (2012), "Comparative analysis and critical issues of the main constitutive laws for concrete elements confined with FRP", Compos. B. Eng., 43(8), 3219-3230. https://doi.org/10.1016/j.compositesb.2012.04.001.
  20. Nagaprasad, P., Sahoo, D.R. and Rai, D.C. (2009), "Seismic strengthening of RC columns using external steel cage", Earthq. Eng. Struct. Dyn., 38(14), 1563-1586. https://doi.org/10.1002/eqe.917.
  21. Paultre, P., Eid, R. and Robles, H.I. (2009), "Seismic performance of circular high-strength concrete columns", ACI Struct. J., 106(4), 395-404.
  22. Richart, F.E., (1928), "A study of the failure of concrete under combined compressive stresses", University of Illinois at Urbana Champaign.
  23. Rong, C. and Shi, Q. (2020), "Behaviour of angle steel frame confined concrete columns under axial compression", Constr. Build. Mater., 241, 118034. https://doi.org/10.1016/j.conbuildmat.2020.118034.
  24. Shin, H., Min, K. and Mitchell, D. (2018), "Uniaxial behavior of circular ultra-high-performance fiber-reinforced concrete columns confined by spiral reinforcement", Constr. Build. Mater., 168, 379-393. https://doi.org/10.1016/j.conbuildmat.2018.02.073.
  25. Tokgoz, S. and Dundar, C., (2008), "Experimental tests on biaxially loaded concrete-encased composite columns", Steel Compos. Struct. 8(5), 423-438. https://doi.org/10.12989/scs.2008.8.5.423.
  26. Wang, K., Yuan, S.F., Cao, D.F. and Zheng, W.Z. (2015), "Experimental and numerical investigation on frame structure composed of steel reinforced concrete beam and angle-steel concrete column under dynamic loading", Int. J. Civ. Eng., 13(2), 137-147.
  27. Wang, W., Zhang, M., Tang, Y., Zhang, X. and Ding, X. (2017), "Behaviour of high-strength concrete columns confined by spiral reinforcement under uniaxial compression", Constr. Build. Mater., 154, 496-503. https://doi.org/10.1016/j.conbuildmat.2017.07.179.
  28. Xiao, C., Deng, F., Chen, T. and Zhao, Z. (2017), "Experimental study on concrete-encased composite columns with separate steel sections", Steel Compos. Struct., 23(4), 483-491. https://doi.org/https://doi.org/10.12989/scs.2017.23.4.483.
  29. Zheng, W. and Ji, J. (2008), "Dynamic performance of angle-steel concrete columns under low cyclic loading-I : Experimental study", Earthq. Eng. Eng. Vib., 7, 67-75. https://doi.org/10.1007/s11803-008-0768-0