Journal of Institute of Convergence Technology (융복합기술연구소 논문집)

Institute of Convergence Technology (한국교통대학교 융복합기술연구소)
권호 표지
DOI QR코드

DOI QR Code

Thermal Durability Characteristics of Precious Metal(Pt) and Additives for a Catalytic Combustor

촉매연소기용 귀금속 촉매와 조촉매의 열적 내구특성 연구

  • Choi, Byungchul (School of Mechanical Engineering, Chonnam Nat. University) ;
  • Ko, Byeongwoon (School of Mechanical Engineering, Chonnam Nat. University) ;
  • Kim, Myeonghwan (School of Mechanical Engineering, Chonnam Nat. University) ;
  • Sin, Hyeok (School of Mechanical Engineering, Chonnam Nat. University)
  • 최병철 (전남대학교 기계공학부) ;
  • 고병운 (전남대학교 기계공학부) ;
  • 김명환 (전남대학교 기계공학부) ;
  • 신혁 (전남대학교 기계공학부)
  • Received : 2020.09.01
  • Accepted : 2020.11.02
  • Published : 2020.11.30
Download PDF
⟨ Previous Next ⟩

Abstract

The purpose of the study is to investigate the thermal durability characteristics of the Pt catalyst and additives used in a catalytic combustor. The catalyst used in the experiment was based on Pt (3 wt%), and a total of 12 types were prepared using a combination of additives (Ni, La, Ce, Fe, and Co). From the results, In the fresh state, the two types of combination catalysts with the highest C3H8 conversion were Pt_Ce (79.9%) at 500℃, and in the three types of combination catalysts, Pt_La_Ni (93.4%) at 500℃ had the best performance. Among aged catalysts at 850℃ and 8 hours, Pt-La-Ni and Pt-Ni-Ce catalysts showed the highest C3H8 conversion of about 71% at 500℃.

Keywords

References

  1. B.C. Choi, "Combustion Engineering", Munundang, Seoul, Korea, p.477-491, 2018.
  2. B.C. Choi, K.H. Park, P.S. Jeong, "Effective Parameters for Combustion Stability of Ultra-Low Emission CO2 generator using a Catalytic Combustor", 11th Asia-Pacific Conf. on Combust.(The Univ. of Sydney), 2017.
  3. B.C. Choi, B.W. Ko, M.H. Kim, H. Shin, C.H. Kim, K.S. Lee, P.S. Jeong, "Thermal Ageing characteristics of catalysts for a catalytic combustor", 2020 Spring. Conf. of Korean Soc. Power System Engin., p.88-89, 2020.
  4. B.C. Choi, P.S. Jeong, "Combustion Characteristics of a CO2 Genenrator Using a Catalytic Combustor", The 57th KOSCO Sympo., p.91-93, 2018.
  5. B.C. Choi, J.S. Yu, Y.S. Seo, P.S. Jeong, "Improvement of Durability Performance of Catalysts for a Catalytic Combustor", J of Inst. Convergence Tech.(ICT) 9(1), p.207-212, 2019.
  6. G.H. Park, D.S. Kim, B.C. Choi, S.H. Jung, S.H. Park, D.-W. Lee, Y.B. Kim, "Catalytic combustion in a plate type combustor to achieve uniform temperature distribution", J Mecha Sci Tech. 32 (5), p.2407-2418, 2018 https://doi.org/10.1007/s12206-018-0453-9
  7. O. Ghannoum, N.G. Phillip, J.P. Conroy, R.A. Smith, R.D. Attard, R. Woodfield, B.A. Logan, J.D. Lewis, A.T. Tissue, "Exposure to preindustrial, current and future atmospheric CO2 and temperature differentially affects growth and photosynthesis in Eucalyptus", Global Change Biology 16, p.303-19, 2010. https://doi.org/10.1111/j.1365-2486.2009.02003.x
  8. H. Shimaji, "Complex control of the environment and energy conservation technology: Greenhouse horticulture handbook", 5th ed., Japan Greenhouse Horticulture Association, Agri. Press, Tokyo, p.206-216, 2003.
  9. S.H. Kim, D.C. Gitz, R.C. Sicher, J.T. Baker, D.J. Timlin, V.R. Reddy, "Temperature dependence of growth, development, and photosynthesis in maize under elevated CO2", Environ, and Experiment. Botany, 61, p.224-36, 2007 https://doi.org/10.1016/j.envexpbot.2007.06.005
  10. Y. Yazawa, H. Yoshida, T. Hattori, "The support effect on platinum catalyst under oxidizing atmosphere: improvement in the oxidation-resistance of platinum by the electrophilic property of support materials", Applied Catalysis A: Gen, 237 (1-2), p.139-148, 2002. https://doi.org/10.1016/S0926-860X(02)00323-X
  11. Y.Li, C.Luo, Z. Liu, L. Sang, "Catalytic oxidation characteristics of CH4-air mixtures over metal foam monoliths", Applied Energy, 156, p.756-761, 2006. https://doi.org/10.1016/j.apenergy.2015.05.053