Structural Engineering and Mechanics

  • 제76권4호
  • /
  • Pages.541-550
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Performance of BMSC column with large eccentricity under natural exposure conditions

  • Ma, Haiyan (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Zeng, Xiangchao (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Yu, Hongfa (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Yue, Peng (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Zhu, Haiwei (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics) ;
  • Wu, Chengyou (Department of Civil Engineering, Nanjing University of Aeronautics and Astronautics)
  • 투고 : 2020.05.09
  • 심사 : 2020.07.28
  • 발행 : 2020.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

As a new type of concrete material, basic magnesium sulfate cement concrete (BMSC) has the advantages, such as early strength, high strength, good toughness and crack resistance. However, it is unclear about the degradation of the mechanical properties of BMSC columns, which is exposed to the natural environment for several years. In order to apply this new concrete to practical engineering, six large-eccentricity compressive columns of BMSC were studied. The mechanical properties such as the crack propagation, failure morphology, lateral displacement and bearing capacity of BMSC column were studied. The results show that the degradation rate of ultimate load of BMSC column is from 6% to 7%. The degradation rate of the stiffness of the column is from 6% to 13%. With the increase of compressive strength of BMSC, the axial displacement and lateral displacement are gradually reduced. The calculation model of bearing capacity of the BMSC column under the large eccentric compression is proposed. This paper provides a reference for the application of BMSC columns in the civil engineering.

키워드

참고문헌

  1. Cheng C.T (2008), "Seismic behavior of post-tensioned precast reinforced concrete beam-to-column connections", Comput. Concrete, 5(6), 525-544. https://doi.org/10.12989/cac.2008.5.6.525.
  2. Fathifazl, G (2008), "Structural performance of steel reinforced recycled concrete members", Ph.D. Dissertation, Carleton University, Ottawa, Canada. 100-150.
  3. Hu, X.Z. (2008), "Study on the behavior of recycled aggregate concrete columns under static loading", J. Harbin Eng. University, 38(6), 852-858. http://dx.doi.org/10.11990/jheu.201603105.
  4. GB50010-2010 (2010), Code for design of concrete structures GB50010-2010, Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Building Industry Press, Beijing, China.
  5. Marefat, M.S., Khanmohammadi, M., Bahrani, M.K. and Goli, A (2005) "Cyclic load testing and numerical modeling of concrete columns with substandard seismic details," Comput. Concrete 2(5), 367-380. https://doi.org/10.12989/cac.2005.2.5.367 .
  6. GB175-2007 (2002) Standard for test method of mechanical properties on ordinary concrete GB175-2007, Ministry of Housing and Urban-Rural Construction of the People's Republic of China, China Building Industry Press, Beijing, China.
  7. Runcevski, T., Wu, C.Y. and Yu, H.F. (2013), "Structural Characterization of a new Magnesium Oxysulphate Hydrate Cement Phase and its Surface Reactions with Atmospheric Carbon Dioxide", J. American Ceramic Soc., 96(11), 3609-3616. https://doi.org/10.1111/jace.12556.
  8. Tapan, M. and Aboutaha, R.S. (2009), "Load carrying capacity of deteriorated reinforced concrete columns", Comput. Concrete, 6(6), 473-490. https://doi.org/10.12989/cac.2009.6.6.473.
  9. Waling, S.A. and Provis, J.L. (2016), "Magnesia-based cement: a journey of 150 years, and cements for the future?", Chemical Rev., 116(7), 4170-4204. https://doi.org/10.1021/acs.chemrev.5b00463.
  10. Wu, C.Y. (2014), "Fundamental theory and civil engineering application of basic magnesium sulfate cement", Ph.D. Dissertation, University of Chinese Academy of Sciences, Xining, China. 138-143.
  11. Yang, S.Q. and Ma, H.Y. (2016), "Mechanical property of the basic magnesium sulfate cement concrete", Bullet. Chinese Ceramic Soc., 35(8), 2549-2554.
  12. Yue, P. (2019), "Mechanical properties of basic magnesium sulfate cement concrete members under natural exposure conditions", M.Sc. Dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing, China.
  13. Zeng, X.C. and Yu, H.F. (2018), "Experimental study on RC largeeccentricity compressive column of basic magnesium sulfate cement concrete", Struct. Concrete, 19(6), 1608-1618. https://doi.org/10.1002/suco.201700121.
  14. Zeng, X.C (2018), "Research on the beams and columns of basic magnesium sulfate cement concrete", Ph.D. Dissertation, Nanjing University of Aeronautics and Astronautics, Nanjing, China. 30-122.
  15. Zeng, X.C, Yu, H.F and Wu, C.Y. (2018), "Experimental study on compression behavior of reinforced basic magnesium sulfate cement concrete column", J. Building Struct., 39(2), 88-96. http://en.cnki.com.cn/Article_en/CJFDTotal-JZJB201802010.htm
  16. Zeng, X.C. and Yu, H.F. (2017), "Study on large eccentric compression column of basic magnesium sulfate cement concrete", J. Harbin Eng. University, 38(6), 852-858. https://doi.org/10.1007/s12205-020-0647-4.
  17. Zeng, X.C, Yu, H.F and Wu, C.Y. (2018), "An overview of study on basic magnesium sulfate cement and concrete in China (2012-2019)", KSCE J. Civil Eng., 23(10),100-109. https://doi.org/10.1007/s12205-019-0199-7.