Steel and Composite Structures

  • 제37권4호
  • /
  • Pages.431-446
  • /
  • 2020
  • /
  • 1229-9367(pISSN)
  • /
  • 1598-6233(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Flexural performance of double skin composite beams at the Arctic low temperature

  • Yan, Jia-Bao (School of Civil Engineering / Key Laboratory of Coast Civil Structure Safety of Ministry of Education, Tianjin University) ;
  • Dong, Xin (School of Civil Engineering / Key Laboratory of Coast Civil Structure Safety of Ministry of Education, Tianjin University) ;
  • Wang, Tao (Key Laboratory of Earthquake Engineering and Engineering Vibration, Institute of Engineering Mechanics)
  • 투고 : 2019.11.09
  • 심사 : 2020.11.09
  • 발행 : 2020.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents the flexural performance of double skin composite beams (DSCBs) at different Arctic low temperatures. 12 DSCBs were prepared and tested under two-point loading at different Arctic low temperatures of 20, -30, -50, and -70℃. The studied parameters include low-temperature level (T), steel-faceplate thickness (t), shear span ratio (λ), and spacing of headed studs (S). The experimental investigations under two-point loading tests showed that flexural failure occurred to all DSCBs, even including the specimen designed with the small λ ratio of 2.9. The ultimate strength behaviours of DSCBs were improved due to the improved mechanical properties of constructional materials and the confinement on shear connectors. The DSCB subjected to two-point loading and low temperatures exhibits a five-stage working mechanism. The stiffness and strength indexes of DSCBs increase linearly with temperature and t value increasing, while decreasing as shear span ratio boosts. In the contrast, the change of S value from 150 to 200 mm has little effect on the ultimate strength behavior of DSCB.

키워드

과제정보

The authors would like to acknowledge Peiyang Scholar Foundation (grant no. 2019XRX-0026) under Reserved Academic Program from Tianjin University for the works reported herein. The authors gratefully express their gratitude for the financial supports.

참고문헌

  1. Bird, K.J., Charpentier, R.R., Gautier, D.L., Houseknecht, D.W., Klett, T.R., Pitman, J.K. and Wanderey, C.R. (2008), Circum-Arctic Resource Appraisal: Estimates Of Undiscovered Oil and Gas North of the Arctic Circle, Fact Sheet 2008-3049, US. Geological Survey, doi.org/10.3133/fs20083049.
  2. Bruhl, J.C. and Varma, A.H. (2016), "Experimental resistance and available ductility of steel-plate composite walls in one-way bending", J. Struct. Eng., 143(4), 04016222. doi.org/10.1061/(ASCE)ST.1943-541X.0001714.
  3. Chen, L., Wang, S., Lou, Y. and Xia., D. (2019), "Seismic behaviour of double-skin composite wall with L-shaped and C-shaped connectors", J. Constr. Steel Res., 160, 255-270. doi.org/10.1061/(ASCE)ST.1943-541X.0001714.
  4. Choi, B.J. and Han, H.S. (2009), "An experiment on compressive profile of the unstiffened steel plate-concrete structures under compression loading", Steel Compos. Struct., 9(6), 519-534. https://doi.org/10.12989/scs.2009.9.6.519.
  5. Croasdale, K.R. (1985), "Ice Interaction with Structures: Recent Developments and Future Trends", Arctic Technology Conference, Calgary.
  6. Dalen, K.V. (1983), "The strength of stud shear connectors at low temperatures", Can. J. Civ. Eng., 10(3), 429-436. doi:10.1139/l83-070.
  7. Ellis, R.M. and Macgregor, J.G. (1993), "Tests on arch-shaped ice-resisting walls for offshore structures", ACI Struct. J., 90(1), 42-51.
  8. Faghih, F. and Ayoub, A.S. (2019), "Structural performance of steel-concrete sandwich beams with carbon nanofiber reinforcement", Eng. Struct., 187, 177-198. doi.org/10.1016/j.engstruct.2019.02.051.
  9. Feng, L. and Qian, X. (2018), "Size effect and life estimation for welded plate joints under low cycle actions at room and low ambient temperatures", Thin Wall. Struct., 132, 195-207. doi.org/10.1016/j.tws.2018.08.017.
  10. GB/T228.1-2010 (2010), Metallic Materials: Tensile testing, China Planning Press, Beijing, (in Chinese).
  11. GB51081-2015 (2015), Technical code for application of concrete under cryogenic circumstance. China Association for Engineering Construction Standardization, Chemical branch, Beijing, (in Chinese).
  12. Ji, X., Jiang, F. and Qian, J. (2013), "Seismic behavior of steel tube-double steel plate-concrete composite walls: Experimental tests", J. Constr. Steel. Res., 86, 17-30. doi.org/10.1016/j.jcsr.2013.03.011.
  13. Kogbara, R.B., Iyengar, S.R., Grasley, Z.C., Masad, E.A. and Zollinger, D.G. (2013), "A review of concrete properties at cryogenic temperatures: Towards direct LNG containment", Constr. Build Mater., 47, 760-770. doi.org/10.1016/j.conbuildmat.2013.04.025.
  14. Leng, Y.B. and Song, X. B. (2017), "Flexural and shear performance of steel-concrete-steel sandwich slabs under concentrate loads", J. Constr. Steel Res. 134, 38-52. doi.org/10.1016/j.jcsr.2017.03.009.
  15. Marshall, P.W., Sohel, K.M.A., Liew, J.Y.R., Yan, J.B., Palmer, A. and Choo, Y.S. (2012), "Development of SCS sandwich composite shell for Arctic Caissons", Offshore Technology Conference, Houston, Texas, 23818. doi.org/10.4043/23818-MS.
  16. McLean, D.I., Phan, L.T., Lew, H.S. and White, R.N. (1990), "Punching shear behavior of lightweight concrete slabs and shells", ACI Struct. J., 87 (4), 386-392.
  17. Montejo, L.A., Kowalsky, M.J. and Hassan, T. (2009), "Seismic behavior of flexural dominated reinforced concrete bridge columns at low temperatures", J. Cold Reg. Eng., 23(1), 18-42. doi.org/10.1061/(ASCE)0887-381X(2009)23:1(18).
  18. Narayanan, R., Roberts, T.M. and Naji, F.J. (1994), "Design guide for steel-concrete-steel sandwich construction-volume 1: general principles and rules for basic elements", Steel Construction Institute, Ascot, Berkshire.
  19. Nie, J.G., Hu, H.S., Fan, J.S., Tao, M.X., Li, S.Y. and Liu, F.J. (2013), "Experimental study on seismic behaviour of high-strength concrete filled double-steel-plate composite walls", J. Constr. Steel Res., 88, 206-219. doi.org/10.1016/j.jcsr.2013.05.001.
  20. Oduyemi, T.O.S. and Wright, H.D. (1989), "An experimental investigation into the behavior of double skin sandwich beams", J. Constr. Steel Res., 14(3), 197-220. doi.org/10.1016/0143-974X(89)90073-4.
  21. Palmer, A.C. and Croasdale, K.R. (2012), Arctic Offshore Engineering, World Scientific.
  22. Qin, Y., Li, Y.W., Su, Y.S., Lan, X.Z., Wu, Y.D. and Wang, X.Y. (2019), "Compressive behavior of profiled double skin composite wall", Steel Compos. Struct., 30(5) 405-416. https://doi.org/10.12989/scs.2019.30.5.405.
  23. Rafiei, S., Hossain, K.M., Lachemi, M. and Behdinan, K. (2017), "Impact shear resistance of double skin profiled composite wall", Eng. Struct., 140, 267-285. doi.org/10.1016/j.engstruct.2017.02.062.
  24. Roberts, T.M., Edwards, D.N. and Narayanan, R. (1996), "Testing and analysis of steel-concrete-steel sandwich beams", J. Constr. Steel Res., 38(3), 257-279. doi.org/10.1016/0143-974X(96)00022-3.
  25. Sener, K.C., Varma, A.H., Booth, P.N. and Fujimoto, R. (2015), "Seismic behavior of a containment internal structure consisting of composite SC walls", Nucl. Eng. Des., 295, 804-816. doi.org/10.1016/j.nucengdes.2015.07.038.
  26. Shanmugam, N.E., Kumar, G., Thevendran, V. (2002), "Finite element modelling of double skin composite slabs", Finite Elem. Anal. Des., 38(7), 579-599. doi.org/10.1016/S0168-874X(01)00093-2
  27. Shim, C.S., Lee, P.G., Yoon, T.Y. (2004), "Static behavior of large stud shear connectors", Eng. Struct., 26(12), 1853-1860. doi.org/10.1016/j.engstruct.2004.07.011.
  28. Shukry, M.E.S. and Goode, C.D. (1990), "Punching shear strength of composite construction", ACI Struct. J., 87(1), 12-22.
  29. Wang, Y., Zhai, X., Lee, S.C. and Wang, W. (2016), "Responses of curved steel-concrete-steel sandwich shells subjected to blast loading", Thin Wall. Struct., 108, 185-192. doi.org/10.1016/j.tws.2016.08.018.
  30. Yan, J.B., Wang, Z. and Xie, J. (2019), "Compressive behaviours of double skin composite walls at low temperatures relevant to the Arctic environment", Thin Wall. Struct., 140, 294-303. doi.org/10.1016/j.tws.2019.03.047.
  31. Zhang, Z. and Qian, X. (2017), "Effect of prior ductile tearing on cleavage assessment for high-strength steel under mixed-mode I and II conditions", Eng. Fract. Mech., 175, 293-311. doi.org/10.1016/j.engfracmech.2017.01.026.
  32. Zou, G.P., Xia, P.X., Shen, X.H., Wang, P. (2016), "Investigation on the failure mechanism of steel-concrete steel composite beam", Steel Compos. Struct., 20(6), 1183-1191. https://doi.org/10.12989/scs.2016.20.6.1183.