Smart Structures and Systems

  • 제26권5호
  • /
  • Pages.559-573
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Economic application of structural health monitoring and internet of things in efficiency of building information modeling

  • Cao, Yan (National Key Project Laboratory, Jiangxi University of Engineering) ;
  • Miraba, Sepideh (Department of Architecture, Soore University) ;
  • Rafiei, Shervin (Department of Construction Engineering and Management, Amirkabir University of Technology) ;
  • Ghabussi, Aria (Department of Civil, Environmental and Construction Engineering, Texas Tech University) ;
  • Bokaei, Fateme (Department of Civil and Architectural Engineering, Eyvanekey University) ;
  • Baharom, Shahrizan (Department of Civil Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan) ;
  • Haramipour, Pedram (Department of Architecture, Shahid Beheshti University) ;
  • Assilzadeh, Hamid (Institute of Research and Development, Duy Tan University)
  • 투고 : 2019.09.23
  • 심사 : 2020.06.13
  • 발행 : 2020.11.25
⟨ 이전 논문 다음 논문 ⟩

초록

One of the powerful data management tools is Building Information Modeling (BIM) which operates through obtaining, recalling, sharing, sorting and sorting data and supplying a digital environment of them. Employing SHM, a BIM in monitoring systems, would be an efficient method to address their data management problems and consequently optimize the economic aspects of buildings. The recording of SHM data is an effective way for engineers, facility managers and owners which make the BIM dynamic through the provision of updated information regarding the occurring state and health of different sections of the building. On the other hand, digital transformation is a continuous challenge in construction. In a cloud-based BIM platform, environmental and localization data are integrated which shape the Internet-of-Things (IoT) method. In order to improve work productivity, living comfort, and entertainment, the IoT has been growingly utilized in several products (such as wearables, smart homes). However, investigations confronting the integration of these two technologies (BIM and IoT) remain inadequate and solely focus upon the automatic transmission of sensor information to BIM models. Therefore, in this composition, the use of BIM based on SHM and IOT is reviewed and the economic application is considered.

키워드

과제정보

This paper is supported by Shaanxi Innovation Capability Support Plan (Grant: 2018TD-036), Shaanxi Natural Science Basic Research Project (Grant: S2019-JCYB-2897), and Research Project of Graduate Education and Teaching Reform of Xi'an Technological University in 2017. The study presented herein also was made possible by the National University of Malaysia Research Grant, GUP2018-030.

참고문헌

  1. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  2. Akhoundan, M.R., Khademi, K., Bahmanoo, S., Wakil, K., Mohamad, E.T. and Khorami, M. (2018), "Practical use of computational building information modeling in repairing and maintenance of hospital building-case study", Smart Struct. Syst., Int. J., 22(5), 575-586. https://doi.org/10.12989/sss.2018.22.5.575.
  3. Alabduljabbar, H., Haido, J.H., Alyousef, R., Yousif, S.T., McConnell, J., Wakil, K. and Jermsittiparsert, K. (2020), "Prediction of the flexural behavior of corroded concrete beams using combined method", Structures, 25, 1000-1008. https://doi.org/10.1016/j.istruc.2020.03.057.
  4. Alaskar, A., Alyousef, R., Alabduljabbar, H., Alrshoudi, F., Mohamed, A.M., Jermsittiparsert, K. and Ho, L.S. (2020a), "Elevated temperature resistance of concrete columns with axial loading", Adv. Concrete Constr., Int. J., 9(4), 355-365. https://doi.org/10.12989/acc.2020.9.4.355.
  5. Alaskar, A., Shah, S.N.R., Keerio, M.A., Phulpoto, J.A., Baharom, S., Assilzadeh, H., Alyousef, R., Alabduljabbar, H. and Mohamed, A.M. (2020b), "Development of Pozzolanic material from clay", Adv. Concrete Constr., Int. J., 10(4), 301-310. http://dx.doi.org/10.12989/acc.2020.10.5.393
  6. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020c), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., Int. J., 35(2), 187-197. http://dx.doi.org/10.12989/scs.2020.35.2.187.
  7. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., Int. J., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147.
  8. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel and Composite Structures, Pusan, Korea, July.
  9. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333. http://dx.doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  10. Arabnejad Khanouki, M.M., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  11. Armaghani, D.J., Mirzaei, F., Shariati, M., Trung, N.T., Shariati, M. and Trnavac, D. (2020), "Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber", Geomech. Eng., Int. J., 20(3), 191-205. https://doi.org/10.12989/gae.2020.20.3.191.
  12. Atzori, L., Iera, A. and Morabito, G. (2010), "The internet of things: A survey", Comput. Net., 54(15), 2787-2805. https://doi.org/10.1016/j.comnet.2010.05.010.
  13. Bai, L. (2013), "RFID sensor-driven structural condition monitoring in integrated building information modeling environment", Ph.D. Dissertation, University of Maryland, Maryland, USA.
  14. Baracho, R., Cunha, I. and Pereira Junior, M. (2018), "Information modeling and information retrieval for the internet of things (IoT) in buildings", Syst. Cyber. Inform., 16(2), 7.
  15. Bew, M. and Richards, M. (2008), "BIM maturity diagram, building", Proceedings of the SMART Construct IT Autumn Members Meeting, Brighton, UK, July.
  16. Calis, G., Deora, S., Li, N., Becerik-Gerber, B. and Krishnamachari, B. (2011), "Assessment of WSN and RFID technologies for real-time occupancy information", Proceedings of the 28th International Symposium on Automation and Robotics in Construction, Seoul, Korea, June.
  17. Cao, Y., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alaskar, A., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020a), "Investigation on the monotonic behavior of the steel rack upright-beam column connection", Smart Struct. Syst., Int. J., 26(1), 103-115. https://doi.org/10.12989/sss.2020.26.1.103.
  18. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020b), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Structures, 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.
  19. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020c), "Application of extreme learning machine in behavior of beam to column connections", Structures, 25, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058.
  20. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020d), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., Int. J., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567.
  21. Chang, K.M., Dzeng, R.J. and Wu, Y.J. (2018), "An automated IoT visualization BIM platform for decision support in facilities management", Appl. Sci., 8(7), 1086. https://doi.org/10.3390/app8071086.
  22. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., Int. J., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  23. Da Xu, L. (2011), "Enterprise systems: State-of-the-art and future trends", IEEE Trans. Ind. Inform., 7(4), 630-640. https://doi.org/10.1109/TII.2011.2167156.
  24. Da Xu, L., He, W. and Li, S. (2014), "Internet of things in industries: A survey", IEEE Trans. Ind. Inform., 10(4), 2233-2243. https://doi.org/10.1109/TII.2014.2300753.
  25. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.
  26. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., Int. J., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  27. Del Grosso, A., Basso, P., Ruffini, L., Figini, F. and Cademartori, M. (2017), "Infrastructure management integrating SHM and BIM procedures", Proceedings of the SMAR 2017-4th Conf. on Smart Monitoring Assessment and Rehabilitation of Civil Structures, Istanbul, Turkey, September.
  28. Eastman, C.M., Eastman, C., Teicholz, P. and Sacks, R. (2011), BIM Handbook: A Guide to Building Information Modeling for Owners, Managers, Designers, Engineers and Contractors, John Wiley & Sons, New Jersey, USA.
  29. Fulford, R. and Standing, C. (2014), "Construction industry productivity and the potential for collaborative practice", Int. J. Proj. Manag., 32(2), 315-326. https://doi.org/10.1016/j.ijproman.2013.05.007.
  30. Gama, K., Touseau, L. and Donsez, D. (2012), "Combining heterogeneous service technologies for building an internet of things middleware", Comput. Commun., 35(4), 405-417. https://doi.org/10.1016/j.comcom.2011.11.003.
  31. Glisic, B., Inaudi, D. and Casanova, N. (2010), "SHM process as perceived through 350 projects", Proceedings of the Smart Sensor Phenomena, Technology, Networks and Systems 2010: International Society for Optics and Photonics, San Diego, USA, April. https://doi.org/10.1117/12.852340.
  32. Gokce, H.U., Browne, D., Gokce, K.U. and Menzel, K. (2010), Improving Energy Efficient Operation of Buildings with Wireless IT Systems, Bauhaus-Universitat, Weimar, Germany.
  33. Gubbi, J., Buyya, R., Marusic, S. and Palaniswami, M. (2013), "Internet of things (IoT): A vision, architectural elements and future directions", Future Gener. Comput. Syst., 29(7), 1645-1660. https://doi.org/10.1016/j.future.2013.01.010.
  34. Guinard, D., Trifa, V., Karnouskos, S., Spiess, P. and Savio, D. (2010), "Interacting with the soa-based internet of things: Discovery, query, selection and on-demand provisioning of web services", IEEE Trans. Serv. Comput., 3(3), 223-235. https://doi.org/10.1109/TSC.2010.3.
  35. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  36. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam und er variable axial compression resting on elastic medium", Struct. Eng. Mech., Int. J., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  37. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., Int. J., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  38. Huston, D. (2010), Structural Sensing, Health Monitoring, and Performance Evaluation, CRC Press, Burlington, USA.
  39. Huston, D., Burns, D. and Razinger, J. (2016), "Structural health monitoring and maintenance aided by building information modelling and repair information tools", WIT Trans. Ecol. Environ., 204, 897-907. https://doi.org/10.2495/SC160731.
  40. Ismail, Z.A., Mutalib, A.A., Hamzah, N. and Baharom, S. (2015), "BIM technologies applications in IBS building maintenance", J. Teknol., 74(3), 69-76.
  41. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., Int. J., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  42. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324.
  43. Kang, K., Lin, J. and Zhang, J. (2018), "BIM-and IoT-based monitoring framework for building performance management", J. Struct. Integr. Maint., 3(4), 254-261. https://doi.org/10.1080/24705314.2018.1536318.
  44. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 2019, 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  45. Kaur, N. and Monga, S. (2014), "Comparisons of wired and wireless networks: A review", Int. J. Adv. Eng. Technol., 5(2), 34-35.
  46. Keshtegar, B., Baharom, S. and El-Shafie, A. (2018), "Selfadaptive conjugate method for a robust and efficient performance measure approach for reliability-based design optimization", Eng. Comput., 34(1), 187-202. https://doi.org/10.1007/s00366-017-0529-7.
  47. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., Int. J., 13(6), 531-538. http://dx.doi.org/10.12989/eas.2017.13.6.531.
  48. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., Int. J., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  49. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  50. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., Int. J., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  51. Li, N. and Becerik-Gerber, B. (2011), "Performance-based evaluation of RFID-based indoor location sensing solutions for the built environment", Adv. Eng. Inform., 25(3), 535-546. https://doi.org/10.1016/j.aei.2011.02.004.
  52. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of pervious concrete", Smart Struct. Syst., Int. J., 23(2), 207-214. https://doi.org/10.12989/sss.2019.23.2.207.
  53. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct. Int. J., 30(3), 271-280. http://dx.doi.org/10.12989/scs.2019.30.3.271.
  54. Malatras, A., Asgari, A. and Bauge, T. (2008), "Web enabled wireless sensor networks for facilities management", IEEE Syst. J., 2(4), 500-512. https://doi.org/10.1109/JSYST.2008.2007815.
  55. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M.M., Baharom, S.B. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., Int. J., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  56. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a v-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intell. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-017-1306-6.
  57. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A, 531, 121169. https://doi.org/10.1016/j.physa.2019.121169.
  58. Miorandi, D., Sicari, S., De Pellegrini, F. and Chlamtac, I. (2012), "Internet of things: Vision, applications and research challenges", Ad Hoc Netw., 10(7), 1497-1516. https://doi.org/10.1016/j.adhoc.2012.02.016.
  59. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., Int. J., 46(6), 853-868. http://dx.doi.org/10.12989/sem.2013.46.6.853.
  60. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  61. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst. Int. J., 14(5), 785-809. http://dx.doi.org/10.12989/sss.2014.14.5.785.
  62. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., Int. J., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  63. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst. Int. J., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.
  64. Mutlib, N.K. and Baharom, S. (2018), "Quantification of delamination in a composite floor using a novel damage index", Nondestruct. Test. Eval., 33(4), 405-426. https://doi.org/10.1080/10589759.2018.1484919.
  65. Mutlib, N.K., Baharom, S., Nuawi, M.Z. and El-Shafie, A. (2016a), "Ultrasonic surface wave monitoring for steel fibrereinforced concrete using gel-coupled piezoceramic sensors: A case study", Arab. J. Sci. Eng., 41(4), 1273-1281. https://doi.org/10.1007/s13369-015-1925-1.
  66. Mutlib, N.K., Baharom, S.B., El‐Shafie, A. and Nuawi, M.Z. (2016b), "Ultrasonic health monitoring in structural engineering: Buildings and bridges", Struct. Control Health Monit., 23(3), 409-422. https://doi.org/10.1002/stc.1800.
  67. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., Int. J., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  68. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., Int. J., 34(3), 347-359. https://doi.org/10.12989/scs.2020.34.3.347.
  69. Napolitano, R., Blyth, A. and Glisic, B. (2018), "Virtual environments for visualizing structural health monitoring sensor networks, data, and metadata", Sensors, 18(1), 243. https://doi.org/10.3390/s18010243.
  70. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., Int. J., 27(5), 537-543. http://dx.doi.org/10.12989/scs.2018.27.5.537.
  71. Nguyen, H.T. (2016), "Integration of BIM and IoT to improve building performance for occupants' perspective", J. 3D Inform. Model., 1(1), 55-73.
  72. NIBS (2008), United States national building information modeling standard version 1- part 1: Overview, principles, and methodologies, NIBS und building SMART Alliance, USA.
  73. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst. Int. J., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  74. Opentechdiary (2015), Internet of Things World Europe. https://opentechdiary.wordpress.com.
  75. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., Int. J., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  76. Papaoikonomou, I. and Nejad, R.H. (2017), "Exploiting the fusion between BIM and IoT", M.Sc. Dissertation, Aalborg University, Aalborg, Denmark.
  77. ProQuest (2017), https://www.proquest.com.
  78. Qi, C.C. (2020), "Big data management in the mining industry", Int. J. Min. Metall. Mater., 27(2), 131-139. https://doi.org/10.1007/s12613-019-1937-z.
  79. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., Int. J., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  80. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors" Smart Struct. Syst. Int. J., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  81. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steelconcrete composite beam's shear strength", Steel Compos. Struct., Int. J., 21(3), 679-688. https://doi.org/10.12989/scs.2016.21.3.679.
  82. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., Int. J., 19(6), 533-542. https://doi.org/10.12989/gae.2019.19.6.533.
  83. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A, 550, 124046. https://doi.org/10.1016/j.physa.2019.124046.
  84. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., Int. J., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  85. Sari, P.A., Suhatril, M., Osman, N., Mu'azu, M., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 35, 1521-1531. https://doi.org/10.1007/s00366-018-0677-4.
  86. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst. Int. J., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  87. Shah, S., Ramli Sulong, N.H., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PLoS One, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  88. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016a), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin-Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  89. Shah, S., Sulong, N.R., Jumaat, M. and Shariati, M. (2016b), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  90. Shah, S., Sulong, N.R., Khan, R., Jumaat, M. and Shariati, M. (2016c), "Behavior of industrial steel rack connections", Mech. Syst. Signal Process., 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  91. Shahabi, S., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., Int. J., 20(3), 651-669. https://10.12989/scs.2016.20.3.651.
  92. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., Int. J., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  93. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian multiplier method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., Int. J., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  94. Shariati, M. (2013), "Behaviour of c-shaped shear connectors in stell concrete composite beams", M.Sc. Dissertation, Universiti Malaya, Kulala Lumpur, Malaysia.
  95. Shariati, A. (2014), "Behaviour of c-shaped angle shear connectors in high strength concrete", M.Sc. Dissertation, Universiti Malaya, Kulala Lumpur, Malaysia.
  96. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel and Composite Structures, Sydney, Australia, July.
  97. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011a), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Sci. Res. Essays., 6(4), 977-983. https://doi.org/10.5897/SRE10.1120.
  98. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011b), "Assessing the strength of reinforced concrete structures through ultrasonic pulse velocity and Schmidt rebound hammer tests", Sci. Res. Essays., 6(1), 213-220. http://dx.doi.org/10.5897/SRE10.879.
  99. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011c), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, Jeju, Korea, September.
  100. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011d), "Behavior of channel shear connectors in normal and light weight aggregate concrete (experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303.
  101. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604.
  102. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012b), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890. https://doi.org/10.5897/IJPSx11.004.
  103. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34, 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  104. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  105. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012e), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Proceedings of the Fifth International Conference on Engineering Failure Analysis, Hague, Netherlands, July.
  106. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  107. Shariati, M., Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Arabnejad Khanouki, M.M. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail. Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  108. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Arabnejad Khanouki, M.M. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  109. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  110. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017), "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Proceedings of the Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering-CSM 2017, Zurich, Switzerland, September.
  111. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.A.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail. Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  112. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., Int. J., 19(6), 473-484. https://doi.org/10.12989/gae.2019.19.6.473.
  113. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., Int. J., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  114. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M.N. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst. Int. J., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  115. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural networkparticle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  116. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019e), "Application of extreme learning machine (ELM) and genetic programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., Int. J., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  117. Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019f), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., Int. J., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.
  118. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019g), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., Int. J., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  119. Shariati, M., Lagzian, M., Maleki, S., Shariati, A. and Trung, N.T. (2020a), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., Int. J., 35(4), 599-609. http://dx.doi.org/10.12989/scs.2020.35.4.599.
  120. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020b), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., Int. J., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  121. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020c), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., Int. J., 34(3), 393-407. https://doi.org/10.12989/scs.2020.34.3.393.
  122. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020d), "A novel hybrid extreme learning machine-grey wolf optimizer (ELMGWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 2020, 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  123. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020e), "Identification of the most influencing parameters on the properties of corroded concrete beams using an adaptive neuro-fuzzy inference system (ANFIS)", Steel Compos. Struct., Int. J., 34(1), 155-170. https://doi.org/10.12989/scs.2020.34.1.155.
  124. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020f), "Prediction of concrete strength in presence of furnace slag and fly ash using hybrid ANN-GA (artificial neural network-genetic algorithm)", Smart Struct. Syst. Int. J., 25(2), 183-195. https://doi.org/10.12989/sss.2020.25.2.183.
  125. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N.A. (2020g), "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 2020, 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  126. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020h), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., Int. J., 34(3), 377-391. https://doi.org/10.12989/scs.2020.34.3.377.
  127. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020i), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: An experimental investigation", Steel Compos. Struct., Int. J., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  128. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete beam-column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  129. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Sci. Res. Essays, 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  130. Smarsly, K. and Tauscher, E. (2016), "Monitoring information modeling for semantic mapping of structural health monitoring systems", Proceedings of the 16th International Conference on Computing in Civil and Building Engineering, Osaka, Japan, July.
  131. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geol. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3.
  132. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLoS One, 11(8), e0156989. https://doi.org/10.1371/journal.pone.0156989.
  133. Theiler, M., Dragos, K. and Smarsly, K. (2017), "BIM-based design of structural health monitoring systems", Proceedings of the 11th International Workshop on Structural Health Monitoring, Stanford, USA, June.
  134. Tian, M.W., Ebadi, A.G., Jermsittiparsert, K., Kadyrov, M., Ponomarev, A., Javanshir, N. and Nojavan, S. (2019a), "Riskbased stochastic scheduling of energy hub system in the presence of heating network and thermal energy management", Appl. Therm. Eng., 159, 113825. https://doi.org/10.1016/j.applthermaleng.2019.113825.
  135. Tian, M.W., Yuen, H.C., Yan, S.R. and Huang, W.L. (2019b), "The multiple selections of fostering applications of hydrogen energy by integrating economic and industrial evaluation of different regions", Int. J. Hydrog. Energy, 44(56), 29390-29398. https://doi.org/10.1016/j.ijhydene.2019.07.089.
  136. Tian, M.W., Wang, L., Yan, S.R., Tian, X.X., Liu, Z.Q. and Rodrigues, J.J.P. (2019c), "Research on financial technology innovation and application based on 5G network", IEEE Access, 7, 138614-138623. https://doi.org/10.1109/ACCESS.2019.2936860.
  137. Tian, M., Yan, S. and Tian, X. (2019d), "Discrete approximate iterative method for fuzzy investment portfolio based on transaction cost threshold constraint", Open Phys., 17(1), 41-47. https://doi.org/10.1515/phys-2019-0005.
  138. Tian, M.W., Wang, S. and Yan, S.R (2019e), "Damage assessment of marine pollution disasters to biological resources based on numerical models", Acta Microsc., 28(3), 490-497.
  139. Tian, M.W., Yan, S.R., Tian, X.X. and Liu, J.A. (2019f), "Research on image recognition method of bank financing bill based on binary tree decision", J. Vis. Commun. Image Represent., 60, 123-128. https://doi.org/10.1016/j.jvcir.2018.12.016.
  140. Tian, M.W., Yan, S.R., Tian, X.X., Nojavan, S. and Jermsittiparsert, K. (2020a), "Risk and profit-based bidding and offering strategies for pumped hydro storage in the energy market", J. Clean. Prod., 256, 120715. https://doi.org/10.1016/j.jclepro.2020.120715.
  141. Tian, M.W., Yan, S.R., Tian, X.X., Kazemi, M., Nojavan, S. and Jermsittiparsert, K. (2020b), "Risk-involved stochastic scheduling of plug-in electric vehicles aggregator in day-ahead and reserve markets using downside risk constraints method", Sustain. Cities Soc., 55, 102051. https://doi.org/10.1016/j.scs.2020.102051.
  142. Tian, M.W., Parikhani, T., Jermsittiparsert, K. and Ashraf, M.A. (2020c), "Exergoeconomic optimization of a new double-flash geothermal-based combined cooling and power (CCP) system at two different cooling temperatures assisted by boosters", J. Clean. Prod., 261, 120921. https://doi.org/10.1016/j.jclepro.2020.120921.
  143. Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams/Ali Toghroli", M.Sc. Dissertation, Universiti Malaya, Kulala Lumpur, Malaysia.
  144. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., Int. J., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.
  145. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intell. Manuf., 29, 1793-1801 https://doi.org/10.1007/s10845-016-1217-y.
  146. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Proceedings of the Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering - CSM 2017, Zurich, Switzerland, September.
  147. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete., Int. J., 21(5), 525-530. https://doi.org/10.12989/cac.2018.21.5.525.
  148. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., Int. J., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  149. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  150. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech, Int. J., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  151. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., Int. J., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  152. Underwood, J. and Isikdag, U. (2011), "Emerging technologies for BIM 2.0", Constr. Innov., 11(3), 252-258. https://doi.org/10.1108/14714171111148990.
  153. Valinjadshoubi, M., Bagchi, A. and Moselhi, O. (2016), "Managing structural health monitoring data using building information modeling", Proceedings of the 2nd World Congress and Exhibition on Construction and Steel Structure, Las Vegas, NV, USA, September.
  154. Valinejadshoubi, M., Bagchi, A. and Moselhi, O. (2019), "Development of a BIM-based data management system for structural health monitoring with application to modular buildings: Case study", J. Comput. Civ. Eng., 33(3), 05019003. https://doi.org/10.1061/(ASCE)CP.1943-5487.0000826.
  155. Van Nederveen, G. and Tolman, F. (1992), "Modelling multiple views on buildings", Autom. Constr., 1(3), 215-224. https://doi.org/10.1016/0926-5805(92)90014-B.
  156. Wang, J., Fu, Y. and Yang, X. (2017), "An integrated system for building structural health monitoring and early warning based on an Internet of things approach", Int. J. Distrib. Sens. Netw., 13(1), 1550147716689101. https://doi.org/10.1177/1550147716689101.
  157. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., Int. J., 27(3), 389-399. http://dx.doi.org/10.12989/scs.2018.27.3.389.
  158. Wu, Y., Sheng, Q.Z. and Zeadally, S. (2013), RFID: Opportunities and Challenges, Springer, London, UK.
  159. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., Int. J., 30(5), 433-441. https://doi.org/10.12989/scs.2019.30.5.433.
  160. Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., Nguyen, H. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., Int. J., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.
  161. Yan, S.R., Sedeh, S., Toghraie, D., Afrand, M. and Foong, L.K. (2020a), "Analysis and manegement of laminar blood flow inside a cerebral blood vessel using a finite volume software program for biomedical engineering", Comput. Methods Programs Biomed., 190, 105384. https://doi.org/10.1016/j.cmpb.2020.105384.
  162. Yan, S.R., Sedeh, S., Toghraie, D., Afrand, M. and Foong, L.K. (2020b), "Analysis and manegement of laminar blood flow inside a cerebral blood vessel using a fifinite volume software program for biomedical engineering", Comput. Methods Programs Biomed., 190, 105384. https://doi.org/10.1016/j.cmpb.2020.105384.
  163. Yan, S.R., Gholami, T., Amiri, O., Salavati-Niasari, M., Seifi, S., Amiri, M., Sabet, M. and Foong, L.K. (2020c), "Effect of adding TiO2, SiO2 and graphene on of electrochemical hydrogen storage performance and coulombic efficiency of CoAl2O4 spinel", J. Alloys Compd., 828, 54353. https://doi.org/10.1016/j.jallcom.2020.154353.
  164. Yan, S.R., Shirani, N., Zarringhalam, M., Toghraie, D., Nguyen, Q. and Karimipour, A. (2020d), "Prediction of boiling flow characteristics in rough and smooth microchannels using molecular dynamics simulation: Investigation the effects of boundary wall temperatures", J. Mol. Liq., 306, 112937. https://doi.org/10.1016/j.molliq.2020.112937.
  165. Yan, S.R., Kalbasi, R., Nguyen, Q. and Karimipour, A. (2020e), "Rheological behavior of hybrid MWCNTs-TiO2/EG nanofluid: A comprehensive modeling and experimental study", J. Mol. Liq., 308, 113058. https://doi.org/10.1016/j.molliq.2020.113058.
  166. Yan, S.R., Foroughi, M.M., Safaei, M., Jahani, S., Ebrahimpoor, N., Borhani, F., Barati, N.R.Z., Aramesh-Boroujeni, Z. and Foong, L.K. (2020f), "A review: Recent advances in ultrasensitive and highly specific recognition aptasensors with various detection strategies", Int. J. Biol. Macromol., 155, 184-207. https://doi.org/10.1016/j.ijbiomac.2020.03.173.
  167. Yan, S.R., Zarringhalam, M., Toghraie, D., Foong, L.K. and Talebizadehsardari, P. (2020g), "Numerical investigation of non-Newtonian blood flow within an artery with cone shape of stenosis in various stenosis angles", Comput. Methods Programs Biomed., 192, 105434. https://doi.org/10.1016/j.cmpb.2020.105434.
  168. Yan, S.R., Mehrizi, M.Z. and Foong, L.K. (2020h), "Synthesis of NiAl-WC composite by the thermal explosion of elemental powders", Ceram. Int., 46(10), 15146-15151. https://doi.org/10.1016/j.ceramint.2020.03.050.
  169. Yan, S.R., Fazilati, M.A., Samani, N., Ghasemi, H., Toghraie, D., Nguyen, Q. and Karimipour, A. (2020i), "Energy efficiency optimization of the waste heat recovery system with embedded phase change materials in greenhouses: A thermo-economicenvironmental study", J. Energy Storage, 30, 101445. https://doi.org/10.1016/j.est.2020.101445.
  170. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., Int. J., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  171. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., Int. J., 29(1), 67-75. http://dx.doi.org/10.12989/scs.2018.29.1.067.
  172. Zhao, X., Fourie, A. and Qi, C.C. (2019), "An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon", Int. J. Min. Metall. Mater., 26(10), 1206-1216. https://doi.org/10.1007/s12613-019-1885-7.
  173. Zhao, X., Fourie, A. and Qi, C.C. (2020a), "Mechanics and safety issues in tailing-based backfill: A review", Int. J. Min. Metall. Mater., 27(9), 1165-1178. https://doi.org/10.1007/s12613-020-2004-5.
  174. Zhao, X., Fourie, A., Veenstra, R. and Qi, C.C. (2020b), "Safety of barricades in cemented paste-backfilled stopes", Int. J. Min. Metall. Mater., 27(8), 1054-1064. https://doi.org/10.1007/s12613-020-2006-3.