Journal of Power Electronics

The Korean Institute of Power Electronics (전력전자학회)
권호 표지
DOI QR코드

DOI QR Code

Design and research of deep slot universal motor for electric power tools

  • Qi, Huang (School of Automation, Northwestern Polytechnical University) ;
  • Ling, Luo (School of Automation, Northwestern Polytechnical University) ;
  • Jichao, Cao (National Engineering Research Center for Small and Special Precision Motors) ;
  • Wei, Xi (National Engineering Research Center for Small and Special Precision Motors)
  • Received : 2020.05.05
  • Accepted : 2020.08.01
  • Published : 2020.11.20
⟨ Previous Next ⟩

Abstract

In this paper, a deep slot universal motor is designed for electric power tools. The deep slot structure can reduce the cost of universal motor materials and improve production efficiency. A mathematical model of a universal motor is established and a simulation model is established by MagNet finite element software. Then, the static magnetic field distribution and load characteristics of the deep slot universal motor are analyzed. Different methods are adopted to improve the commutation spark of a deep slot universal motor. Finally, three 550-W and 9500-rpm prototype motors are tested. Simulation and experimental results indicate that an uneven air gap, brush offset by a certain angle, as well as different turns of the lead coil and the lag coil can effectively improve the commutation spark of a deep slot universal motor.

Keywords

References

  1. Xheladini, L., Tap, A., Asan, T., Yilmaz, M., Ergene, L.T.: Permanent magnet synchronous motor and universal motor comparison for washing machine application. In: 2017 11th IEEE International Conference on Compatibility, Power Electronics and Power Engineering (CPE-POWERENG), Cadiz, pp. 381-386 (2017)
  2. Kurihara, K., Sakamoto, S.: Steady-state and transient performance analysis for universal motors with appropriate turns ratio of lead coils to lag coils. IEEE Trans. Magn. 44(6), 1506-1509 (2008) https://doi.org/10.1109/TMAG.2007.916406
  3. Papa, G., Korousic-Seljak, B., Benedicic, B., Kmecl, T.: Universal motor efficiency improvement using evolutionary optimization. IEEE Trans. Ind. Electron. 50(3), 602-611 (2003) https://doi.org/10.1109/TIE.2003.812455
  4. Syrigos, S.P., Tatakis, E.C.: An alternative universal motor drive with unity power factor operating in DC and AC modes. In: 2016 XXII International Conference on Electrical Machines (ICEM), Lausanne, pp. 962-968 (2016)
  5. Sun, X., Shi, Z., Lei, G., Guo, Y., Zhu, J.: Analysis and design optimization of a permanent magnet synchronous motor for a campus patrol electric vehicle. IEEE Trans. Veh. Technol. 68(11), 10535-10544 (2019) https://doi.org/10.1109/tvt.2019.2939794
  6. Cros, J., Viarouge, P., Chalifour, Y., Figueroa, J.: A new structure of universal motor using soft magnetic composites. IEEE Trans. Ind. Appl. 40(2), 550-557 (2004) https://doi.org/10.1109/TIA.2004.824491
  7. Nayak, D.S., Shivarudra Swamy, R.: Loss and efficiency analysis of universal motor used in mixer grinder by mathematical modelling. In: 2018 IEEE International Conference on Automatic Control and Intelligent Systems (ICACIS), Shah Alam, pp. 105-110 (2018)
  8. Di Gerlando, A., Perini, R.: Model of the commutation phenomena in a universal motor. IEEE Trans. Energy Convers. 21(1), 27-33 (2006) https://doi.org/10.1109/TEC.2004.841514
  9. Ko, S., Ko, J., Lee, S., Cheon, J., Kim, H.: A study on in-wheel motor control to improve vehicle stability using human-in-the-loop simulation. J. Power Electron. 13(4), 536-545 (2013) https://doi.org/10.6113/JPE.2013.13.4.536
  10. Shi, Z., Sun, X., Lei, G., Yang, Z., Guo, Y., Zhu, J.: Analysis and optimization of radial force of permanent-magnet synchronous hub motors. IEEE Trans. Magn. 56(2), 1-4 (2020)
  11. Gerlando, A., Perini, R., Rapi, G.: Equivalent circuit for the performance analysis of universal motors. IEEE Trans. Energy Convers. 19(1), 18-27 (2004) https://doi.org/10.1109/TEC.2003.821831
  12. Marcu, M.D., Slusariuc,, R.I., Popescu, F.G., Samoila, L.B.: Universal DC motor protection system based on microcontroller embedded algorithm. In: 2018 International Symposium on Fundamentals of Electrical Engineering (ISFEE), Bucharest, Romania, pp. 1-4 (2018)
  13. Niwa, Y., Akiyama, Y.: The relation of a brush life to the commutator width and brush width ratio of a universal motor. In: 2009 International Conference on Power Electronics and Drive Systems (PEDS), Taipei, pp. 1384-1389 (2009)
  14. Qi, H., Ling, L., Liwei Z.: Design and research of axial flux permanent magnet motor for electric vehicle. In: 2019 IEEE 3rd International Electrical and Energy Conference (CIEEC), Beijing, China, pp. 1918-1923 (2019)
  15. Nanhekhan, B., Woudstra, J., van Duijsen, P.: Brushed universal motor controller for DC-grids. In: 2018 19th International Conference on Research and Education in Mechatronics (REM), Delft, pp. 153-158 (2018)
  16. Llinas, R.R., Leznik, E., Makarenko, V.I.: The olivo-cerebellar circuit as a universal motor control system. IEEE J. Ocean. Eng. 29(3), 631-639 (2004) https://doi.org/10.1109/JOE.2004.833212
  17. Kurihara, K., Koseki, S.: New design of high output equivalent 4-pole universal motor. In: 2018 XIII International Conference on Electrical Machines (ICEM), Alexandroupoli, pp. 291-296 (2018)
  18. Garg, R.: Behavioral analysis of a universal motor when operated on DC and AC supply. In: 2019 International Conference on Intelligent Computing and Control Systems (ICCS), Madurai, pp. 705-710 (2019)
  19. Lin, D., Zhou, P., Stanton, S.: An analytical model and parameter computation for universal motors. In: 2011 IEEE International Electric Machines & Drives Conference (IEMDC), Niagara Falls, Niagara Falls, pp. 119-124 (2011)
  20. Qi, H., Ling, L., Li-kun, X., Yang, T.: Research on the characteristics of open winding brushless DC motor. In: 2019 22nd International Conference on Electrical Machines and Systems (ICEMS), Harbin, pp. 1-6 (2019)