참고문헌
- Kim, H. G., Nah, S. C., Hong, D. P., Cho, N. I., “A Study on the optimal design for aluminum boom shape in high ladder vehicles,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 16, No. 3, pp. 96-102, 2007.
- Kim, J. S., “A Study on the weight saving design of the boom in high ladder vehicle,” Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 16, No. 2, pp. 8-13, 2007.
- Joo, J. W., Kang, S. I., Chae, K. B., “Structural analysis of high ladder structure for fire protection,” Journal of Industrial Science and Technology Institute, Vol. 24, No. 1, pp. 69-76, 2010.
- Hong, J. M., Lee, J. H., “Optimal design of boom joint for 2.5ton class aerial lift truck,” Journal of the Korean Society for Precision Engineering, Vol. 35, No. 8, pp. 769-775, 2018. https://doi.org/10.7736/KSPE.2018.35.8.769
- Lee, K. S., "A Study on the characteristics of accelerated life test of automatic angle controlled carriage of ladder truck," A Thesis for a Master's, Chungnam National University, Republic of Korea, 2017.
- Kang, D. M., "Optimal cabin design for special equipment vehicle," A Thesis for a Master's, Jeonju University, Republic of Korea, 2015.
- Jeong, W., "A Study on the enlargement of effectiveness in fire fighting activities by the introduction of aerial lift truck," A Thesis for a Master's, University of Seoul, Republic of Korea, 2019.
- Pertsch, A., Sawodny, O., "Modelling and control of coupled bending and torsional vibrations of an articulated aerial ladder," Mechatronics, Vol. 33, pp. 34-48, 2016. https://doi.org/10.1016/j.mechatronics.2015.11.009
- Horvath, P., Hajdu, F., Kuti, R., "Investigation of swings caused by sudden wind loads during operation of an aerial ladder," Faculty of Mechanical Engineering, Vol. 48, pp. 351-356, 2020.
- Lee, S. S., Kim, J. T., Park, W. Y., “Development of centralized controller with remote control and hydraulic lift,” Journal of Korean Institute of Information, Electronics, and Communication Technology, Vol. 10, No. 3, pp. 232-241, 2017. https://doi.org/10.17661/jkiiect.2017.10.3.232
- Kim, J. T., Lee, G. Y., Lee, S. S., Park, W. Y., “Centralized controller high altitude work car elevations lift structure safety assessment,” Journal of Korean Institute of Information, Electronics, and Communication Technology, Vol. 10, No. 4, pp. 350-357, 2017. https://doi.org/10.17661/jkiiect.2017.10.4.350
- Lee, S. S., Kim, J. T., Park, W. Y., “Structural analysis for the development of a vertically raise type aerial work machinery,” Journal of Korean Institute of Information, Electronics, and Communication Technology, Vol. 10, No. 3, pp. 225-231, 2017. https://doi.org/10.17661/jkiiect.2017.10.3.225
- Lee, J. J., "A Study on optimization of the aerial lift boom through the finite element analysis," A Thesis for a Master's, Jeobuk National University, Republic of Korea, 2011.
- Kang, D. M., Cho, K. C., Hwang, T. J., Sim, K. J., Guk, H. H., Kim, I, S., Park, M. H., “A Study on the composite insulation boom development of the aerial work platform for electric work,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 17, No. 2, pp. 137-144, 2018.
- Jeong, S. H., "Development of a vehicle loading lift for various aerial works," Journal of the Korean Society of Mechanical Technology, Vol. 12, No. 3, pp. 141-146, 2010. https://doi.org/10.17958/ksmt.12.3.201009.141
피인용 문헌
- 소방차량 정밀점검 분석에 따른 차종별 결함 발생에 관한 연구 vol.17, pp.1, 2020, https://doi.org/10.15683/kosdi.2021.3.31.112