References
- Mohri, N., Suzuki, M., Furuya, M., Saito, N. and Kobayashi, A., "Electrode Wear Process in Electrical Discharge Machining," CIRP Annals, Vol. 44, No. 1, pp. 165-168, 1995. https://doi.org/10.1016/S0007-8506(07)62298-7
- Ramasawmy, H. and Blunt, L., "Effect of EDM process parameters on 3D surface topography," Journal of Materials Processing Technology, Vol. 148, No. 2, pp. 155-164, 2004. https://doi.org/10.1016/S0924-0136(03)00652-6
- Kiyak, M. and Cakir, O., "Examination of machining parameters on surface roughness in EDM of tool steel," Journal of Materials Processing Technology, Vol. 191, No. 1-3, pp. 141-144, 2007. https://doi.org/10.1016/j.jmatprotec.2007.03.008
- Jeong, H. J., Byun, J. H., Cheng, D. J., Oh, Y. J. and Kim, S. J., "The Comparison of Response Surface and Discharge Energy Methods in Predicting MRR and Roughness of Sink EDM," Journal of the Korean Society of Manufacturing Technology Engineers, Vol. 26, No. 5, pp. 466-471, 2017. https://doi.org/10.7735/ksmte.2017.26.5.466
- Gostimirovic, M., Kovac, P., Sekulic, M. and Skoric, B., "Influence of discharge energy on machining characteristics in EDM," Journal of Mechanical Science and Technology, Vol. 26, No. 1, pp. 173-179, 2012. https://doi.org/10.1007/s12206-011-0922-x
- Klocke, F., Schwade, M., Klink, A. and Veselovac, D., "Analysis of material removal rate and electrode wear in sinking EDM roughing strategies using different graphite grades," Procedia CIRP, Vol. 6, pp. 163-167, 2013. https://doi.org/10.1016/j.procir.2013.03.079
- Kim, S. H. and Lim, H. S., "Development of Micro Milling EDM and Analysis of Machined Characteristics," Journal of the Korean Society of Manufacturing Process Engineers, Vol. 10, No. 1, pp. 1-7, 2011.
- Ozgedik, A. and Cogun, C., "An Experimental Investigation of Tool Wear in Electric Discharge Machining," The International Journal of Advanced Manufacturing Technology, Vol. 27, No. 5-6, pp. 488-500, 2006. https://doi.org/10.1007/s00170-004-2220-6
- Pei, J., Zhang, L., Du, J., Zhuang, X., Zhou, Z., Wu, S. and Zhu, Y., "A model of tool wear in electrical discharge machining process based on electromagnetic theory," International Journal of Machine Tools and Manufacture, Vol. 117, pp. 31-41, 2017. https://doi.org/10.1016/j.ijmachtools.2017.03.001
- Luis, C., Puertas, I. and Villa, a. G., "Material Removal Rate and Electrode Wear Study on the EDM of Silicon Carbide," Journal of Materials Processing Technology, Vol. 164, pp. 889-896, 2005.
- Khan, M., Rahman, A., Rahman, M. and Kadirgama, K., "Electrode Wear Rate of Graphite Electrodes During Electrical Discharge Machining Processes on Titanium Alloy TI-5AL-2.5SN," International Journal of Automotive & Mechanical Engineering, Vol. 9, pp. 1782-1792, 2014.
- Haron, C. C., Ghani, J. A., Burhanuddin, Y., Seong, Y. and Swee, C., "Copper and Graphite Electrodes Performance in Electrical-discharge Machining of XW42 tool steel," Journal of Materials Processing Technology, Vol. 201, No. 1-3, pp. 570-573, 2008. https://doi.org/10.1016/j.jmatprotec.2007.11.285
- Amorim, F. L. and Weingaertner, W. L., "The behavior of graphite and copper electrodes on the finish die-sinking electrical discharge machining (EDM) of AISI P20 tool steel," Journal of the Brazilian Society of Mechanical Sciences and Engineering, Vol. 29, No. 4, pp. 366-371, 2007. https://doi.org/10.1590/S1678-58782007000400004
- Maeng, H. Y., Park K. and Kim, S. D., "Improvements of Electro Discharge Machining Characteristics using Side Flushing Devices", Proceedings of KSMTE Annual Spring Conference 2005, pp. 272-277, 2005.
- Yu, S. F., Lee, B. Y., and Lin, W. S., "Waveform Monitoring of Electric Discharge Machining by Wavelet Transform," International Journal of Advanced Manufacturing Technology, Vol. 17, pp. 339-343, 2001. https://doi.org/10.1007/s001700170168