References
- Yao, D., "Direct Search-Based Automatic Minimization of Warpage And Weldlines in Injection Molded Parts," A Thesis for a Master, University of Massachusetts, pp. 1-135, 1998.
- Liao, S. J., Chang, D. Y., Chen, H. J., Tsou, L. S., Ho, J. R., Yau, H. T. and Hsieh, W. H., “Optimal process conditions of shrinkage and warpage of thin-wall parts,” Polymer Engineering and Science, Vol. 44, No. 5, pp. 917-928, 2004. https://doi.org/10.1002/pen.20083
- Erzurumlu, T. and Ozcelik, B., "Minimization of warpage and sink index in injection-molded thermoplastic parts using Taguchi optimization method," Materials and Design, Vol. 27, pp. 853-861, 2006. https://doi.org/10.1016/j.matdes.2005.03.017
- Zhou, J. and Turng, L.S., “Adaptive Multiobjective Optimization of Process Conditions for Injection Molding Using a Gaussian Process Approach,” Advances in Polymer Technology, Vol. 26, No. 2, pp. 71-85, 2007. https://doi.org/10.1002/adv.20092
- Mehat, N. M. and Kamaruddin, S., “Multi- Response Optimization of Injection Moulding Processing Parameters Using the Taguchi Method,” Polymer-Plastics Technology and Engineering, Vol. 50, No. 15, pp. 1519-1526, 2011. https://doi.org/10.1080/03602559.2011.603776
- Azaman, M. D., Wang, X., Zhao, G. and Wang, G., "Research on the Reduction of Sink Mark and Warpage of the Molded Part in Rapid Heat Cycle Molding Process," Materials and Design, Vol. 47, pp. 779-792, 2013. https://doi.org/10.1016/j.matdes.2012.12.047
- Derringer, G. and Suich, R., “Simultaneous Optimization of Several Response Variables,” Journal of Quality Technology, Vol. 12, No. 4, pp. 214-219, 1980. https://doi.org/10.1080/00224065.1980.11980968
- Derringer, G., “A Balancing Act: Optimizing a Product's Properties,” Quality Progress, Vol. 27, No. 6, pp. 51-58, 1994.
- Del Castillo, E., Montgomery, D. C., and McCarville, D. R., "Modified Desirability Function for Multiple Response Optimization," Journal of Quality Technology, Vol. 28, No. 3, pp. 337-336, 1996. https://doi.org/10.1080/00224065.1996.11979684
- Malloy, R. A., Plastic Part Design for Injection Molding, Hanser/Gardner Publishers Inc., Cincinnati, pp. 75-84, 1994.
- Park, J. C., Yu, M. J., and Park, K. Y., “Design of Feed System and Process Conditions for Automobile Lamp Garnish Lens with Injection Molding Analysis,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 18, No. 11, pp. 1-8, 2019. https://doi.org/10.14775/ksmpe.2019.18.11.001
- Shin, N. H., Oh, H. S. and Kang, S. G., The Optimization of Injection Molding Process by CAE, Daekwangseorim, Seoul, pp. 327-422, 2010.