Structural Engineering and Mechanics

  • 제76권3호
  • /
  • Pages.325-336
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Examination of analytical and finite element solutions regarding contact of a functionally graded layer

  • Yaylaci, Murat (Recep Tayyip Erdogan University, Department of Civil Engineering) ;
  • Adiyaman, Gokhan (Karadeniz Technical University, Department of Civil Engineering) ;
  • Oner, Erdal (Bayburt University, Department of Civil Engineering) ;
  • Birinci, Ahmet (Karadeniz Technical University, Department of Civil Engineering)
  • 투고 : 2019.11.27
  • 심사 : 2020.06.17
  • 발행 : 2020.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

In this study, the continuous and discontinuous contact problems of functionally graded (FG) layer resting on a rigid foundation were considered. The top of the FG layer was loaded by a distributed load. It was assumed that the shear modulus and the density of the layer varied according to exponential functions along the depth whereas the the Poisson ratio remained constant. The problem first was solved analytically and the results were verified with the ones obtained from finite element (FE) solution. In analytical solution, the stress and displacement components for FG layer were obtained by the help of Fourier integral transform. Critical load expression and integral equation for continuous and discontinuous contact, respectively, using corresponding boundary conditions in each case. The finite element solution of the problem was carried out using ANSYS software program. In continuous contact case, initial separation distance and contact stresses along the contact surface between the FG layer and the rigid foundation were examined. Separation distances and contact stresses were obtained in case of discontinuous contact. The effect of material properties and loading were investigated using both analytical and FE solutions. It was shown that obtained results were compatible with each other.

키워드

과제정보

The research described in this paper was financially supported by the The Scientific and Technological Research Council of Turkey (TUBITAK) for their financial support [Project number: 216M524].

참고문헌

  1. Adiyaman, G., Oner, E. and Birinci, A. (2017), "Continuous and discontinuous contact problem of a functionally graded layer resting on a rigid foundation", Acta Mechanica, 228(9), 3003-3017. https://doi.org/10.1007/s00707-017-1871-y.
  2. Adiyaman, G., Yaylaci, M. and Birinci, A. (2015), "Analytical and finite element solution of a receding contact problem", Struct. Eng. Mech., 54(1), 69-85. https://doi.org/10.12989/sem.2015.54.1.069.
  3. Aizikovich, S.M., Vasil'ev, A.S., Krenev, L.I., Trubchik, I.S. and Seleznev, N.M. (2011), "Contact problems for functionally graded materials of complicated structure", Mech. Compos. Mater., 47(5), 539-548. https://doi.org/10.1007/s11029-011-9232-8.
  4. Balci, M.N. and Dag, S. (2019), "Solution of the dynamic frictional contact problem between a functionally graded coating and a moving cylindrical punch", J. Solids. Struct., 161, 267-281. https://doi.org/10.1016/j.ijsolstr.2018.11.020.
  5. Bendine, K., Boukhoulda, B.F., Nouari, M. and Satla, Z. (2016), "Structural modeling and active vibration control of smart fgm plate through ANSYS", J. Comput. Methods, 14(2), 9-20. https://doi.org/10.1142/S0219876217500426
  6. Birinci, A. and Erdol, R. (2003), "A frictionless contact problem for two elastic layers supported by a Winkler foundation", Struct. Eng. Mech., 15(3), 331-344. https://doi.org/10.12989/sem.2003.15.3.331.
  7. Chidlow, S.J. and Teodorescu, M. (2014), "Sliding contact problems involving inhomogeneous materials comprising a coating-transition layer-substrate and a rigid punch", J. Solids. Struct., 51(10), 1931-1945. https://doi.org/10.1016/j.ijsolstr.2014.02.003.
  8. Choi, H.J. (2009), "On the plane contact problem of a functionally graded elastic layer loaded by a frictional sliding flat punch", J. Mech. Sci. Technol., 23(10), 2703-2713. https://doi.org/10.1007/s12206-009-0734-4.
  9. Comez, I. (2013), "Contact problem of a functionally graded layer resting on a Winkler foundation", Acta Mechanica, 224(11), 2833-2843. https://doi.org/10.1007/s00707-013-0903-5.
  10. Comez, I. (2019), "Continuous and discontinuous contact problem of a functionally graded layer pressed by a rigid cylindrical punch", Europ. J. Mech. A/Solids, 73, 437-448. https://doi.org/10.1016/j.euromechsol.2018.10.009.
  11. Comez, I. (2019), "Frictional moving contact problem of an orthotropic layer indented by a rigid cylindrical punch", Mech. Mater., 133, 120-127. https://doi.org/10.1016/j.mechmat.2019.02.012.
  12. Comez, I. and Erdol, R. (2013), "Frictional contact problem of a rigid stamp and an elastic layer bonded to a homogeneous substrate", Archive Appl. Mech., 83(1), 15-24. https://doi.org/10.1007/s00419-012-0626-4.
  13. Comez, I. and Yilmaz, K.B. (2019), "Mechanics of frictional contact for an arbitrary oriented orthotropic material", ZAMM - J. Appl. Math. Mech./ Zeitschrift fur Angewandte Mathematik und Mechanik, 99(3), e201800084. https://doi.org/10.1002/zamm.201800084.
  14. Comez, I., Kahya, V. and Erdol, R. (2018), "On the receding contact between an inhomogeneously coated elastic layer and a homogeneous half-plane", Arch. Mech., 70(6), 485-504. https://doi.org/10.1016/j.mechmat.2017.05.007.
  15. Dag, S., Guler, M.A., Yildirim, B. and Cihan Ozatag, A. (2009), "Sliding frictional contact between a rigid punch and a laterally graded elastic medium", J. Solids. Struct., 46(22), 4038-4053. https://doi.org/10.1016/j.ijsolstr.2009.07.023.
  16. El-Borgi, S., Abdelmoula, R. and Keer, L. (2006), "A receding contact plane problem between a functionally graded layer and a homogeneous substrate", J. Solids. Struct., 43(3), 658-674. https://doi.org/10.1016/j.ijsolstr.2005.04.017.
  17. El-Borgi, S., Usman, S. and Guler, M.A. (2014), "A frictional receding contact plane problem between a functionally graded layer and a homogeneous substrate", J. Solids. Struct., 51(25), 4462-4476. https://doi.org/10.1016/j.ijsolstr.2014.09.017.
  18. Elloumi, R., Kallel-Kamoun, I. and El-Borgi, S. (2010), "A fully coupled partial slip contact problem in a graded half-plane", Mech. Mater., 42(4), 417-428. https://doi.org/10.1016/j.mechmat.2010.01.002.
  19. Guler, M.A. and Erdogan, F. (2006), "Contact mechanics of two deformable elastic solids with graded coatings", Mech. Mater., 38(7), 633-647. https://doi.org/10.1016/j.mechmat.2005.11.006.
  20. Guler, M.A. and Erdogan, F. (2007), "The frictional sliding contact problems of rigid parabolic and cylindrical stamps on graded coatings", J. Mech. Sci., 49(2), 161-182. https://doi.org/10.1016/j.ijmecsci.2006.08.006.
  21. Guler, M.A., Kucuksucu, A., Yilmaz, K.B. and Yildirim, B. (2017), "On the analytical and finite element solution of plane contact problem of a rigid cylindrical punch sliding over a functionally graded orthotropic medium", J. Mech. Sci., 120, 12-29. https://doi.org/10.1016/j.ijmecsci.2016.11.004
  22. Jana, T., Mitra, A. and Sahoo, P. (2019), "Finite element-based contact analysis of a radially functionally graded hemisphere and a rigid flat", J. Surface Sci. Eng., 13(2-3), 156-180. https://doi.org/10.1504/IJSURFSE.2019.102366.
  23. Karabulut, P.M., Adiyaman, G. and Birinci, A. (2017), "A receding contact problem of a layer resting on a half plane", Struct. Eng. Mech., 64(4), 505-513. https://doi.org/10.12989/sem.2017.64.4.505.
  24. Ke, L.L. and Wang, Y.S. (2006), "Two-dimensional contact mechanics of functionally graded materials with arbitrary spatial variations of material properties", J. Solids. Struct., 43(18), 5779-5798. https://doi.org/10.1016/j.ijsolstr.2005.06.081.
  25. Ke, L.L. and Wang, Y.S. (2007a), "Fretting contact with finite friction of a functionally graded coating with arbitrarily varying elastic modulus Part 1: Normal loading", J. Stain Analysis Eng. Design, 42(5), 293-304. https://doi.org/10.1243/03093247jsa282.
  26. Ke, L.L. and Wang, Y.S. (2007b), "Fretting contact with finite friction of a functionally graded coating with arbitrarily varying elastic modulus Part 2: Tangential loading", J. Stain Analysis Eng. Design, 42(5), 305-313. https://doi.org/10.1243/03093247jsa283.
  27. Ke, L.L. and Wang, Y.S. (2007c), "Two-dimensional sliding frictional contact of functionally graded materials", Europ. J. Mech. A/Solids, 26(1), 171-188. https://doi.org/10.1016/j.euromechsol.2006.05.007.
  28. Ke, L.L. and Wang, Y.S. (2010), "Fretting Contact of Two Dissimilar Elastic Bodies with Functionally Graded Coatings", Mech. Adv. Mater. Struct., 17(6), 433-447. https://doi.org/10.1080/15376494.2010.483327.
  29. Ke, L.L., Wang, Y.S., Yang, J. and Kitipornchai, S. (2010), "Sliding frictional contact analysis of functionally graded piezoelectric layered half-plane", Acta Mechanica, 209(3), 249-268. https://doi.org/10.1007/s00707-009-0181-4.
  30. Krenev, L.I., Aizikovich, S.M., Tokovyy, Y.V. and Wang, Y.C. (2015), "Axisymmetric problem on the indentation of a hot circular punch into an arbitrarily nonhomogeneous half-space", J. Solids. Struct., 59, 18-28. https://doi.org/10.1016/j.ijsolstr.2014.12.017.
  31. Kul'chyts'kyi-Zhyhailo, R. and Rogowski, G. (2009), "Axially symmetric contact problem of pressing of an absolutely rigid ball into an elastic half space with inhomogeneous coating", Mater. Sci., 45(6), 845-858. https://doi.org/10.1007/s11003-010-9251-y.
  32. Kulchytsky-Zhyhailo, R. and Bajkowski, A. (2012), "Analytical and numerical methods of solution of three-dimensional problem of elasticity for functionally graded coated half-space", J. Mech. Sci., 54(1), 105-112. https://doi.org/10.1016/j.ijmecsci.2011.10.001.
  33. Liu, C.H., Cheng, I., Tsai, A.C., Wang, L.J. and Hsu, J.Y. (2010), "Using multiple point constraints in finite element analysis of two dimensional contact problems", Struct. Eng. Mech., 36(1), 95-110. https://doi.org/10.12989/sem.2010.36.1.095.
  34. Liu, C.H., Hofstetter, G. and Mang, H.A. (1995), "A finite-element algorithm for contact problems with friction", Struct. Eng. Mech., 3(3), 289-297. https://doi.org/10.12989/sem.1995.3.3.289.
  35. Liu, J., Ke, L.L. and Wang, Y.S. (2011), "Two-dimensional thermoelastic contact problem of functionally graded materials involving frictional heating", J. Solids. Struct., 48(18), 2536-2548. https://doi.org/10.1016/j.ijsolstr.2011.05.003.
  36. Liu, T.J. and Wang, Y.S. (2008), "Axisymmetric frictionless contact problem of a functionally graded coating with exponentially varying modulus", Acta Mechanica, 199(1), 151-165. https://doi.org/10.1007/s00707-007-0556-3.
  37. Liu, T.J. and Zhang, C. (2016), "Axisymmetric conducting indenter on a functionally graded piezoelectric coating", J. Mech. Sci., 115-116, 34-44. https://doi.org/10.1016/j.ijmecsci.2016.06.008.
  38. Liu, T.J., Wang, Y.S. and Xing, Y.M. (2012), "The axisymmetric partial slip contact problem of a graded coating", Meccanica, 47(7), 1673-1693. https://doi.org/10.1007/s11012-012-9547-0.
  39. Liu, T.J., Wang, Y.S. and Zhang, C. (2008), "Axisymmetric frictionless contact of functionally graded materials", Archive Appl. Mech., 78(4), 267-282. https://doi.org/10.1007/s00419-007-0160-y.
  40. Liu, Z., Yan, J. and Mi, C. (2018), "On the receding contact between a two-layer inhomogeneous laminate and a half-plane", Struct. Eng. Mech., 66(3), 329-341. http://dx.doi.org/10.12989/sem.2018.66.3.329.
  41. Oner, E., Yaylaci, M. and Birinci, A. (2014), "Solution of A receding contact problem using an analytical method and a finite element method", J. Mech. Mater. Struct., 9(3), 333-345. https://doi.org/10.2140/jomms.2014.9.333.
  42. Ozsahin, T.S. (2007), "Frictionless contact problem for a layer on an elastic half plane loaded by means of two dissimilar rigid punches", Struct. Eng. Mech., 25(4), 383-403. https://doi.org/10.12989/sem.2007.25.4.383.
  43. Polat, A., Kaya, Y. and Ozsahin, T.S. (2018), "Analytical solution to continuous contact problem for a functionally graded layer loaded through two dissimilar rigid punches", Meccanica, 53(14), 3565-3577. https://doi.org/10.1007/s11012-018-0902-7.
  44. Polat, A., Kaya, Y., Bendine, K. and Ozsahin, T.S. (2019), "Frictionless Contact Problem for a Functionally Graded Layer Loaded Through Two Rigid Punches Using Finite Element Method", J. Mech., 35(5), 591-600. https://doi.org/10.1017/jmech.2018.55
  45. Rhimi, M., El-Borgi, S. and Lajnef, N. (2011), "A double receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", Mech. Mater., 43(12), 787-798. https://doi.org/10.1016/j.mechmat.2011.08.013.
  46. Rhimi, M., El-Borgi, S., Ben Said, W. and Ben Jemaa, F. (2009), "A receding contact axisymmetric problem between a functionally graded layer and a homogeneous substrate", J. Solids. Struct., 46(20), 3633-3642. https://doi.org/10.1016/j.ijsolstr.2009.06.008.
  47. Sburlati, R. (2012), "Elastic Solution in a functionally graded coating subjected to a concentrate force", J. Mech. Mater. Struct., 7, 401-412. https://doi.org/10.2140/jomms.2012.7.401.
  48. Su, J., Ke, L.L. and Wang, Y.S. (2016), "Axisymmetric frictionless contact of a functionally graded piezoelectric layered half-space under a conducting punch", J. Solids. Struct., 90, 45-59. https://doi.org/10.1016/j.ijsolstr.2016.04.011.
  49. Trubchik, I.S., Evich, L.N. and Mitrin, B.I. (2011), "The Analytical Solution of the Contact Problem for the Functionally Graded Layer of Complicate Structure", Procedia Eng., 10, 1754-1759. https://doi.org/10.1016/j.proeng.2011.04.292.
  50. Vasiliev, A., Volkov, S., Aizikovich, S. and Jeng, Y.R. (2014), "Axisymmetric contact problems of the theory of elasticity for inhomogeneous layers", ZAMM - J. Appl. Math. Mech. Zeitschrift fur Angewandte Mathematik und Mechanik, 94(9), 705-712. https://doi.org/10.1002/zamm.201300067.
  51. Vasiliev, A.S., Volkov, S.S., Aizikovich, S.M. and Mitrin, B.I. (2016), "Plane contact problem on indentation of a flat punch into a transversely-isotropic half-plane with functionally graded transversely-isotropic coating", Zeitschrift fur angewandte Mathematik und Physik, 68(1), 4. https://doi.org/10.1007/s00033-016-0746-8.
  52. Volkov, S., Aizikovich, S., Wang, Y.S. and Fedotov, I. (2013), "Analytical solution of axisymmetric contact problem about indentation of a circular indenter into a soft functionally graded elastic layer", Acta Mechanica Sinica, 29(2), 196-201. https://doi.org/10.1007/s10409-013-0022-5.
  53. Wang, Z., Yu, C. and Wang, Q. (2015), "An efficient method for solving three-dimensional fretting contact problems involving multilayered or functionally graded materials", J. Solids. Struct., 66, 46-61. https://doi.org/10.1016/j.ijsolstr.2015.04.010.
  54. Yan, J. and Li, X. (2015), "Double receding contact plane problem between a functionally graded layer and an elastic layer", Europ. J. Mech. A/Solids, 53, 143-150. https://doi.org/10.1016/j.euromechsol.2015.04.001.
  55. Yan, J. and Mi, C. (2017a), "Double contact analysis of multilayered elastic structures involving functionally graded materials", Arch. Mech., 69(3), 199-221.
  56. Yan, J. and Mi, C. (2017b), "On the receding contact between an inhomogeneously coated elastic layer and a homogeneous half-plane", Mech. Mater., 112, 18-27. https://doi.org/10.1016/j.mechmat.2017.05.007.
  57. Yan, J., Mi, C. and Liu, Z. (2019), "A semianalytical and finite-element solution to the unbonded contact between a frictionless layer and an FGM-coated half-plane", Math. Mech. Solids, 24(2), 448-464. https://doi.org/10.1177/1081286517744600.
  58. Yang, J. and Ke, L.L. (2008), "Two-dimensional contact problem for a coating-graded layer-substrate structure under a rigid cylindrical punch", J. Mech. Sci., 50(6), 985-994. https://doi.org/10.1016/j.ijmecsci.2008.03.002.
  59. Yaylaci, M. and Birinci, A. (2013), "The receding contact problem of two elastic layers supported by two elastic quarter planes", Struct. Eng. Mech., 48(2), 241-255. https://doi.org/10.12989/sem.2013.48.2.241.

피인용 문헌

  1. Examination of contact problem between functionally graded punch and functionally graded layer resting on elastic plane vol.78, pp.2, 2021, https://doi.org/10.12989/sem.2021.78.2.135
  2. Z shape joints under uniaxial compression vol.12, pp.2, 2020, https://doi.org/10.12989/acc.2021.12.2.105
  3. Influence of non-persistent joint sets on the failure behaviour of concrete under uniaxial compression test vol.28, pp.3, 2020, https://doi.org/10.12989/cac.2021.28.3.289