Structural Engineering and Mechanics

  • 제76권3호
  • /
  • Pages.311-324
  • /
  • 2020
  • /
  • 1225-4568(pISSN)
  • /
  • 1598-6217(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Behavior of fully- connected and partially-connected multi-story steel plate shear wall structures

  • Azarafrooza, A. (Faculty of Civil Engineering, Urmia University of Technology) ;
  • Shekastehband, B. (Faculty of Civil Engineering, Urmia University of Technology)
  • 투고 : 2019.06.20
  • 심사 : 2020.06.17
  • 발행 : 2020.11.10
⟨ 이전 논문 다음 논문 ⟩

초록

Until now, a comparative study on fully and partially-connected steel shear walls leading to enhancing strength and stiffness reduction of partially-connected steel plate shear wall structures has not been reported. In this paper a number of 4-story and 8-story steel plate shear walls, are considered with three different connection details of infill plate to surrounding frame. The specimens are modeled using nonlinear finite element method verified excellently with the experimental results and analyzed under monotonic loading. A comparison between initial stiffness and shear strength of models as well as percentage of shear force by model boundary frame and infill plate are performed. Moreover, a comparison between energy dissipation, ductility factor and distribution of Von-Mises stresses of models are presented. According to the results, the initial stiffness, shear resistance, energy dissipation and ductility of the models with beam-only connected infill plates (SSW-BO) is found to be about 53%, 12%, 15% and 48% on average smaller than those of models with fully-connected infill plates (SPSW), respectively. However, performance characteristics of semi-supported steel shear walls (SSSW) containing secondary columns by simultaneously decreasing boundary frame strength and increasing thickness of infill plates are comparable to those of SPSWs. Results show that by using secondary columns as well as increasing thickness of infill plates, the stress demands on boundary frame decreases substantially by as much as 35%. A significant increase in infill plate share on shear capacity by as much as 95% and 72% progress for the 4-story SSW-BO and 8-story SSSW8, respectively, as compared with non-strengthened counterparts. A similar trend is achieved by strengthening secondary columns of 4-story SSSW leading to an increase of 50% in shear force contribution of infill plate.

키워드

참고문헌

  1. Abualnour, M., Houari, M.S.A., Tounsi, A., Adda Bedia, E., Mahmoud, S.R. (2018), "A novel quasi-3D trigonometric plate theory for free vibration analysis of advanced composite plates", Compos. Struct., 184, 688-697. https://doi.org/10.1016/j.compstruct.2017.10.047.
  2. AISC, ANSI/AISC 341-10 (2010), Seismic provisions for structural steel buildings. Chicago (IL): American Institute of Steel Construction; USA.
  3. Alavi, E. and Nateghi, F. (2013), "Experimental study on diagonally stiffened steel plate shear wall s with central perforation", J. Constr. Steel Res., 89, 9-20. https://doi.org/10.1016/j.jcsr.2013.06.005.
  4. Astaneh-Asl, A. (2001), "Seismic Behavior and Design of Steel Shear Walls", Steel Technical Information and Product Services Report, Structural Steel Educational Council, Moraga, CA, USA.
  5. Bakhadda, B., Bouiadjra, M.B., Bourada, F., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "Dynamic and bending analysis of carbon nanotube-reinforced composite plates with elastic foundation", Wind Struct., 27(5), 311-324. https://doi.org/10.12989/was.2018.27.5.311.
  6. Behbahanifard, M., Grondin, G. and Elwi, A. (2003), "Experimental and Numerical Investigation of Steel Plate Shear Walls", Structural Engineering Report No. 254, Department of Civil and Environmental Engineering, University of Alberta; Edmonton, AB, Canada.
  7. Berman, J.W. (2011), "Seismic behavior of code designed steel plate shear walls", J. Eng. Struct., 33, 230-244. https://doi.org/10.1016/j.engstruct.2010.10.015.
  8. Berman, J. and Bruneau, M. (2008), "Capacity design of vertical boundary elements in steel plate shear walls", AISC Eng. J., 45(1), 57-71.
  9. Bhowmick, A.K., Driver, R.G. and Grondin, G.Y. (2009), "Seismic Analysis of Steel Plate Shear Walls Considering Strain Rate and P-Delta Effects", J. Constr. Steel Res., 65, 1149-1159. https://doi.org/10.1016/j.jcsr.2008.08.003
  10. Boutaleb, S., Benrahou, K.H., Bakora, A., Algarni, A., Bousahla, A.A., Tounsi, A., Tounsi, A. and Mahmoud, S.R. (2019), "Dynamic Analysis of nanosize FG rectangular plates based on simple nonlocal quasi 3D HSDT", Adv. Nano Res., 7(3), 189-206. http://dx.doi.org/10.12989/anr.2019.7.3.191.
  11. Brando, G. and De Matteis, G. (2012), "Experimental and numerical analysis of a multistiffened pure aluminum shear panel", Thin-Wall. Struct., 49(10), 1277-1287. https://doi.org/10.1016/j.tws.2011.05.007
  12. Bruneau, M., Uang, C. M. and Sabelli, R. (2011), Ductile Design of Steel Structures, Mc Graw Hill, New York, USA.
  13. Canadian Standards Association (2001), "Limit states design of steel structures", CAN/CSA-S16-09; Toronto, Canada.
  14. Caccese, V., Elgaaly, M. and Chen, R. (1993), "Experimental study of thin steel-plate shear walls under cyclic load", J. Struct. Eng., ASCE, 119(2), 573-587. https://doi.org/10.1061/(ASCE)0733-9445(1993)119:2(573).
  15. Clayton, P.M., Berman, J.W. and Lowes, L.N. (2015), "Seismic performance of self-centering steel plate shear walls with beam-only-connected infill plates", J. Constr. Steel Res., 106, 198-208. https://doi.org/10.1016/j.jcsr.2014.12.017.
  16. CSA. (2009), "Design of steel structure", CSA S16-09; Canadian Standard Association, Mississauga, ON, Canada.
  17. De Matteis, G., Brando, G. and Mazzolani, F.M. (2012), "Pure aluminum: An innovative material for structural applications in seismic engineering", J. Constr. Build. Mater., 26(1), 677-686. https://doi.org/10.1016/j.conbuildmat.2011.06.071
  18. Driver, R. G., Grondin, G. Y., Behbahanifard, M. and Hussain M. A. (2001) "Recent developments and future directions in steel plate shear wall research", Proceedings of North American Steel Construction Conference, Florida, May.
  19. Driver, R.G., Kulak, G.L., Elwi, A.E. and Kennedy, D.J.L. (1998), "Cyclic Tests of Four-Story Steel Plate Shear Wall", J. Struct. Eng., ASCE, 124(2), 112-120. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:2(112).
  20. Fourn, H., Ait Atmane, H., Bourada, M., Bousahla, A.A., Tounsi, A. and Mahmoud, S.R. (2018), "A novel four variable refined plate theory for wave propagation in functionally graded material plates", Steel Compos. Struct., 27(1), 109-122. https://doi.org/10.12989/scs.2018.27.1.109.
  21. Habashi, H.R and Alinia, M.M. (2010), "Characteristics of the wall-frame interaction in steel plate shear walls", J. Constr. Steel Res., 66, 150-158. https://doi.org/10.1016/j.jcsr.2009.09.004.
  22. Hichem, B., Bakora, A., Tounsi, A. and Bousahla, A.A. (2017), "An efficient and simple four variable refined plate theory for buckling analysis of functionally graded plates", Steel Compos. Struct., 25(3), 257-270. https://doi.org/10.12989/scs.2017.25.3.257.
  23. Hossain, K.M.A. and Wright, H.D. (2005), "Finite element modelling of the shear behaviour of profiled composite walls incorporating steel-concrete interaction", Struct. Eng. Mech., 21(6), 659-676. https://doi.org/10.12989/sem.2005.21.6.659.
  24. Hosseinzadeh, S.A.A. and Tehranizadeh, M. (2014), "Behavioral characteristics of code designed steel plate shear wall systems", J. Constr. Steel Res., 99, 72-84. https://doi.org/10.1016/j.jcsr.2014.04.004.
  25. Jahanpour, A., Moharrami, H. and Aghakoochak A. (2011), "Evaluation of ultimate capacity of semi-supported steel shear walls", J. Constr. Steel Res. 67, 1022-1030. https://doi.org/10.1016/j.jcsr.2011.01.007.
  26. Lubell, A. S., Prion, H. G. L., Ventura, C. E. and Rezai, M. (2000), "Unstiffened Steel Plate Shear Wall Performance under Cyclic Loading", J. Struct. Eng., ASCE, 126(4) ,453-460. https://doi.org/10.1061/(ASCE)0733-9445(2000)126:4(453).
  27. Monnier, A.B. and Harasimowicz, A.P. (2007), "Shear Strength", Modern Steel Construction, AISC, 22-25.
  28. Purba, R and Bruneau, M. (2009), "Finite element investigation and design recommendations for perforated steel plate shear walls", J. Struct. Eng., ASCE, 135(11), 1367-1376. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000061.
  29. Sabelli, Rafael, and Michel Bruneau (2006), "AISC Design Guide 20 - Steel plate shear walls", American Institute of Steel Construction, USA.
  30. Seilie I.F. and Hooper, J.D. (2005), "Steel plate shear walls: Practical design and construction", Modern Steel Construction, AISC, 45(4), 56-60.
  31. Shekastehband, B., Azaraxsh, A.A., Showkati, H. (2017a), "Experimental and numerical study on seismic behavior of LYS and HYS steel plate shear walls connected to frame beams only", Arch. Civil Mech. Eng., 17, 154-168. https://doi.org/10.1016/j.acme.2016.09.006.
  32. Shekastehband, B., Azaraxsh, A.A., Showkati, H. and Pavir, A. (2017b), "Behavior of semi-supported steel shear walls: Experimental and numerical simulations", Eng. Struct., 135, 161-176. https://doi.org/10.1016/j.engstruct.2017.01.004.
  33. Shekastehband, B., Azaraxsh, A.A and Showkati, H. (2017c), "Hysteretic behavior of perforated steel plate shear walls with beam-only connected infill plates", Steel Compos. Struct., 25(4), 505-521. https://doi.org/10.12989/scs.2017.25.4.505.
  34. SIMULIA (2009), "ABAQUS/Standard Version 6.9 analysis user's manual", Pawtucket, Rhode Island, USA.
  35. Timler P.A., and Kulak, G.L. (1983), "Experimental Study of Steel Plate Shear Walls", Structural Engineering Report No. 114, Department of Civil Engineering, University of Alberta, Edmonton, AB, Canada.
  36. Vian D., Bruneau, M. and Purba, R. (2009a), "Special perforated steel plate shear walls with reduced beam section anchor beams ii: analysis and design recommendations", J. Struct. Eng., ASCE, 135(3), 221-228. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:3(221).
  37. Vian D., Bruneau, M., Tsai, K.C. and Lin, Y.C. (2009b), "Special perforated steel plate shear walls with reduced beam section anchor beams i: Experimental investigation", J. Struct. Eng., ASCE, 135(3), 211-220. https://doi.org/10.1061/(ASCE)0733-9445(2009)135:3(211).
  38. Vian, D. and Bruneau, M. (2005), "Steel Plate Walls for Seismic Design and Retrofit of Building Structures", Technical Report MCEER-05-0010; Multidisciplinary Center for Earthquake Engineering Research, State University of New York at Buffalo, Buffalo, NY, USA.
  39. Wei, M.W., Liew, J.Y.R., Yong, D. and Fu, X.Y. (2017), "Experimental and numerical investigation of novel partially connected steel plate shear walls", J. Constr. Steel Res., 132, 1-15. https://doi.org/10.1016/j.jcsr.2017.01.013.
  40. Xue, M., and Lu, L.W. (1994), "Influence of steel shear wall panels with surrounding frame members", Proc. SSRC Annual Technical Session, 339-354.
  41. Younsi, A., Tounsi, A., Fatima Zohra, Z., Bousahla, A.A. (2018), "Novel quasi-3D and 2D shear deformation theories for bending and free vibration analysis of FGM plates", Geomech. Eng., 14(6), 519-532. https://doi.org/10.12989/gae.2018.14.6.519.