DOI QR코드

DOI QR Code

The Analysis of the Effects of Design Parameters on the Energy Efficiency and Performance of TEM Dehumidifiers

열전모듈 제습기의 에너지 효율과 성능에 미치는 설계 인자의 영향 분석

  • Lee, Tae-Hee (Department of Building Technology, Suwon Science College)
  • 이태희 (수원과학대학교 건축기계설비과)
  • Received : 2020.08.02
  • Accepted : 2020.08.25
  • Published : 2020.09.01

Abstract

To provide a design direction for high efficiency thermoelectric module(TEM) dehumidifiers, the effects of design factors of TEM dehumidifiers on dehumidification energy efficiency and performance were numerically investigated. The design factors considered in this study are the TEM capacity, the performance of heat exchangers on the heating and cooling surfaces of the TEM. The higher capacity of the TEM results the higher dehumidification energy efficiency and performance at some operating voltage. The enhanced performance of the heat exchanger on heating surface increased the dehumidification energy efficiency and performance at all the operating voltage. The enhanced performance of the heat exchanger on cooling surface decreased the dehumidification energy efficiency and performance at all operating voltage.

Keywords

References

  1. Ro, S. T., and Seo, J. S., 1990, Principle of thermoelectric refrigeration and system design, Korean J. of Air-Conditioning and Refrigeration Eng., Vol. 19, No. 3, pp. 135-145.
  2. Jeong, E. S., 2012, Optimization of thermoelectric elements for thermoelectric coolers, Korean J. of Air-Conditioning and Refrigeration Eng., Vol. 24, No. 5, pp. 409-414. https://doi.org/10.6110/KJACR.2012.24.5.409
  3. Jiang, Liben, 2016, Isothermal dehumidification with a simply thermoelectric device: concept and feasibility, I. J. of Ambient Energy, Vol. 37, No. 5, pp. 481-485. https://doi.org/10.1080/01430750.2014.989334
  4. Vian, J. G., Astrain, D., and Dominguez, M., 2002, Numerical modelling and a design of a thermoelectric dehumidifier, Applied Thermal Engineering, Vol. 22, pp. 407-422. https://doi.org/10.1016/S1359-4311(01)00102-8
  5. Jradi, M., Ghaddar, N., and Ghali, K., 2012, Experimental and theoretical study of an integrated thermoelectric-photovoltaic system for air dehumidification and fresh water production, International journal of energy research, Vol. 36, No. 9, pp. 963-974. https://doi.org/10.1002/er.1848
  6. Lee, T. H., 2019, Development of analysis algorithm of a thermoelectric module applied dehumidifier, Korean J. of Air-Conditioning and Refrigeration Eng., Vol. 31, No. 10, pp. 473-482. https://doi.org/10.6110/KJACR.2019.31.10.473
  7. Kang, D. H., Kim, S. H., and Kim, K. H., 2007, Development of a Drain-Type Electronic Dehumidifier Using Thermoelectric Element, Proceedings of the KSME Conference 2007, pp. 3430-3434.
  8. Ryu, S. R., Yeom, H. J., Lee, H. J., and Cho, H., 2018, A Fundamental Study on the Composition for the Hybrid Dehumidification System Using Thermoelectric Device , J. of KIAEBS, Vol. 12, No. 6, pp. 618-626.
  9. Kwon, O. K., Yun, J. H., and Kim J. H., 2006, Performance Test Evaluation of Electronic Dehumidifier Using Thermoelectric Module, Proceedings of the KSME Conference 2006, pp. 2046-2051.
  10. Wang, H., and Qi, C., 2010, Experimental study of operation performance of a low power thermoelectric cooling dehumidifier, I. J. of Energy and Environment, Vol. 1, Issue 3, pp.459-466.
  11. Im, D. H., 2018, Study on the Design of a New Heatsink Cooling System for Thermoelectric Dehumidifier, M.S. Thesis, Korea University.
  12. Kim, D. S., 2014, Theoretical Analysis of a Recuperative Refrigeration Dehumidifier, Korean J. of Air-Conditioning and Refrigeration Eng., Vol. 26, No. 1, pp. 48-54. https://doi.org/10.6110/KJACR.2014.26.1.048
  13. Lee, T. H., 2018, The Effect of Design Parameters on the Energy Efficiency f a TEM Refrigerator, Korea Society of Geothermal Energy Engineers, Vol. 14, No. 3, pp. 29-34.