DOI QR코드

DOI QR Code

Performance of concrete modified with SCBA and GGBFS subjected to elevated temperature

  • Palaskar, Satish Muralidhar (Department of Civil Engineering, SVNIT) ;
  • Vesmawala, Gaurang R. (Department of Civil Engineering, SVNIT)
  • 투고 : 2020.05.02
  • 심사 : 2020.09.12
  • 발행 : 2020.09.25

초록

This research paper presents the outcomes in terms of mechanical and microstructural characteristics of binary and ternary concrete when exposed to elevated temperature. Three parameter were taken into account, (a) elevated temperature (i.e., 200, 400, 600 and 800℃) (b) binary concrete with cementitious material sugarcane bagasse ash (SCBA) and ground granulated blast furnace slag (GGBFS) replacement percentage (i.e., 0, 15, 20, 25 and 30%) and (c) ternary concrete with cementitious material SCBA and GGBFS replacement percentage (i.e., 0, 15, 20, 25 and 30%). A total of 285 standard cube specimens (150 mm × 150 mm × 150 mm) containing Ordinary Portland Cement (OPC), SCBA, and GGBFS were made. These specimens then exposed to several elevated temperatures for 2 h, afterword is allowed to cool at room temperature. The following basic physical, mechanical, and microstructural characteristics were then determined and discussed. (a) mass loss ratio, (b) ultrasonic pulse velocity (UPV) (c) physical behavior, (d) compressive strength, and (e) field emission scanning electron microscope (FESEM). It was found that compressive strength increases up to 400℃; beyond this temperature, it decreases. UPV value and massloss decrease with increase in temperature as well as the change in color and crack were observed at a higher temperature.

키워드

참고문헌

  1. Arioz, O. (2007), "Effects of elevated temperatures on properties of concrete", Fire Safety J., 42(8), 516-522. https://doi.org/10.1016/j.firesaf.2007.01.003
  2. Ashteyat, A.M., Haddad, R.H. and Ismeik, M. (2014), "Prediction of mechanical properties of post-heated self-compacting concrete using non-destructive tests", Eur. J. Environ. Civil Eng., 18(1), 1-10. https://doi.org/10.1080/19648189.2013.841593
  3. Belouadah, M., Rahmouni, Z.E.A. and Tebbal, N. (2018), "Effects of glass powder on the characteristics of concrete subjected to high temperatures", Adv. Concrete Constr., Int. J., 6(3), 311-322. https://doi.org/10.12989/acc.2018.6.3.311
  4. Chan, Y.N., Luo, X. and Sun, W. (2000), "Compressive strength and pore structure of high-performance concrete after exposure to high temperature up to $800^{\circ}C$", Cement Concrete Res., 30(2), 247-251. https://doi.org/10.1016/S0008-8846(99)00240-9
  5. Chen, Z., Chen, J., Ning, F. and Li, Y. (2019), "Residual properties of recycled concrete after exposure to high temperatures", Magazine Concrete Res., 71(15), 781-793. https://doi.org/10.1680/jmacr.17.00503
  6. Deshpande, A.A., Kumar, D. and Ranade, R. (2019), "Influence of high temperatures on the residual mechanical properties of a hybrid fiber-reinforced strain-hardening cementitious composite", Constr. Build. Mater., 208, 283-295. https://doi.org/10.1016/j.conbuildmat.2019.02.129
  7. Dong, X., Ding, Y. and Wang, T. (2008), "Spalling and mechanical properties of fiber reinforced highperformance concrete subjected to fire", J. Wuhan Univ. Technol., Materials Science Edition, 23(5), 743-749. https://doi.org/10.1007/s11595-007-5743-5
  8. Drzymala, T., Jackiewicz-Rek, W., Tomaszewski, M., Kus, A., Galaj, J. and Sukys, R. (2017), "Effects of High Temperature on the Properties of High Performance Concrete (HPC)", Procedia Eng., 172, 256-263. https://doi.org/10.1016/j.proeng.2017.02.108
  9. Drzymala, T., Jackiewicz-Rek, W., Galaj, J. and Sukys, R. (2018), "Assessment of mechanical properties of high strength concrete (HSC) after exposure to high temperature", J. Civil Eng. Manage., 24(2), 138-144. https://doi.org/10.3846/jcem.2018.457
  10. Gencel, O., Brostow, W., Del Coz Diaz, J.J., Martinez-Barrera, G. and Beycioglu, A. (2013), "Effects of elevated temperatures on mechanical properties of concrete containing haematite evaluated using fuzzy logic model", Mater. Res. Innov., 17(6), 382-391. https://doi.org/10.1179/1433075X12Y.0000000070
  11. Hachemi, S. and Ounis, A. (2017), "The influence of sand nature on the residual physical and mechanical properties of concrete after exposure to elevated temperature", Eur. J. Environ. Civil Eng., 8189(May), 1-16. https://doi.org/10.1080/19648189.2017.1327893
  12. Hewlett, P.C. (2004), Lea's Chemistry of Cement and Concrete, Elsevier Butterworth Heinemann Publication, Oxford, UK.
  13. IS 10262 (2009), Recommended guidelines for concrete mix design, Bureau of Indian Standards, New Delhi, India.
  14. IS 12269 (1987), Specification for ordinary Portland cement, Bureau of Indian Standards, New Delhi, India.
  15. IS 13311(Part I) (1992), Non-destructive testing of concrete-Methods of test for Ultrasonic pulse velocity, Bureau of Indian Standards, New Delhi, India.
  16. IS 383 (1970), Specification for coarse and fine aggregates from natural sources for concrete, Bureau of Indian Standards, New Delhi, India.
  17. IS 4031(Part 5) (1988), Methods of physical tests for hydraulic cement: Determination of initial and final setting times, Bureau of Indian Standards, New Delhi, India.
  18. IS 456 (2000), Code of practice for plain and reinforced concrete, Bureau of Indian Standards, New Delhi, India.
  19. IS 516 (1959), Method of tests for strength of concrete, Bureau of Indian Standards, New Delhi, India.
  20. ISO/TR 15655 (2003), Fire resistance-test for thermo-physical and mechanical properties of structural materials at elevated temperatures for fire engineering design, Technical report; Geneva, Switzerland.
  21. Khan, M.S. and Abbas, H. (2016), "Performance of concrete subjected to elevated temperature", Eur. J. Environ. Civil Eng., 20(5), 532-543. https://doi.org/10.1080/19648189.2015.1053152
  22. Ko, J., Ryu, D. and Noguchi, T. (2011), "The spalling mechanism of high-strength concrete under fire", Magaz. Concrete Res., 63(5), 357-370. https://doi.org/10.1680/macr.10.00002
  23. Le, Q.X., Dao, V.T.N., Torero, J.L., Maluk, C. and Bisby, L. (2018), "Effects of temperature and temperature gradient on concrete performance at elevated temperatures", Adv. Struct. Eng., 21(8), 1223-1233. https://doi.org/10.1177/1369433217746347
  24. Liu, Y., Jin, B., Huo, J. and Li, Z. (2018), "Effect of microstructure evolution on mechanical behaviour of concrete after high temperatures", Magaz. Concrete Res., 70(15), 770-784. https://doi.org/10.1680/jmacr.17.00197
  25. Ma, Q., Guo, R., Sun, Y., He, K., Du, H., Yan, F., Lin, Z. and Zhao, Z. (2018), "Behaviour of modified lightweight aggregate concrete after exposure to elevated temperatures", Magaz. Concrete Res., 70(5), 217-230. https://doi.org/10.1680/jmacr.17.00136
  26. Ozawa, M. and Morimoto, H. (2014), "Effects of various fibres on high-temperature spalling in high-performance concrete", Constr. Build. Mater., 71, 83-92. https://doi.org/10.1016/j.conbuildmat.2014.07.068
  27. Poon, C.S., Shui, Z.H. and Lam, L. (2004), "Compressive behavior of fiber reinforced high-performance concrete subjected to elevated temperatures", Cement Concrete Res., 34(12), 2215-2222. https://doi.org/10.1016/j.cemconres.2004.02.011
  28. Sahani, A.K., Samantaa, A.K. and Roy, D.K.S. (2019), "Influence of mineral by-products on compressive strength and microstructure of concrete at high temperature", Adv. Concrete Constr., Int. J., 7(4), 263-275. https://doi.org/10.12989/acc.2019.7.4.263
  29. Salau, M.A., Oseafiana, O.J. and Oyegoke, T.O. (2015), "Effects of elevated temperature on concrete with Recycled Coarse Aggregates", Proceedings of IOP Conference Series: Materials Science and Engineering, 96(1). https://doi.org/10.1088/1757-899X/96/1/012078
  30. Shaikh, F.U.A. (2018), "Effects of slag content on the residual mechanical properties of ambient air-cured geopolymers exposed to elevated temperatures", J. Asian Ceramic Societies, 6(4), 342-358. https://doi.org/10.1080/21870764.2018.1529013
  31. Siddique, R. and Kaur, D. (2012), "Properties of concrete containing ground granulated blast furnace slag (GGBFS) at elevated temperatures", J. Adv. Res., 3(1), 45-51. https://doi.org/10.1016/j.jare.2011.03.004
  32. Sideris, K.K., Manita, P. and Chaniotakis, E. (2009), "Performance of thermally damaged fibre reinforced concretes", Constr. Build. Mater., 23(3), 1232-1239. https://doi.org/10.1016/j.conbuildmat.2008.08.009
  33. Tai, Y.S., Pan, H.H. and Kung, Y.N. (2011), "Mechanical properties of steel fiber reinforced reactive powder concrete following exposure to high temperature reaching $800^{\circ}C$", Nuclear Eng. Des., 241(7), 2416-2424. https://doi.org/10.1016/j.nucengdes.2011.04.008
  34. Wu, Z., Lo, S.H., Kang, H.T. and Su, K.L. (2019), "High Strength Concrete Tests under Elevated Temperature", Athens J. Τechnol. Eng., 6(3), 141-162. https://doi.org/10.30958/ajte.6-3-1
  35. Yadollahi, M.M., Benli, A. and Demirboʇa, R. (2015), "Effects of elevated temperature on pumice based geopolymer composites", Plast. Rubber Compos., 44(6), 226-237. https://doi.org/10.1179/1743289815Y.0000000020
  36. Zhao, H., Wang, Y. and Liu, F. (2017), "Stress-strain relationship of coarse RCA concrete exposed to elevated temperatures", Magaz. Concrete Res., 69(13), 649-664. https://doi.org/10.1680/jmacr.16.00333
  37. Zheng, W., Li, H. and Wang, Y. (2012), "Compressive behaviour of hybrid fiber-reinforced reactive powder concrete after high temperature", Mater. Des., 41, 403-409. https://doi.org/10.1016/j.matdes.2012.05.026