참고문헌
- Li J, Jansen JA, Walboomers XF, van den Beucken JJ. Mechanical aspects of dental implants and osseointegration: A narrative review. J Mech Behav Biomed Mater 2020;103:103574. https://doi.org/10.1016/j.jmbbm.2019.103574
- Nishioka RS, Nishioka LN, Abreu CW, de Vasconcellos LG, Balducci I. Machined and plastic copings in three-element prostheses with different types of implant-abutment joints: a strain gauge comparative analysis. J Appl Oral Sci 2010;18:225-30. https://doi.org/10.1590/S1678-77572010000300005
- de Vasconcellos LG, Kojima AN, Nishioka RS, de Vasconcellos LM, Balducci I. Axial loads on implant-supported partial fixed prostheses for external and internal hex connections and machined and plastic copings: strain gauge analysis. J Oral Implantol 2015;41:149-54. https://doi.org/10.1563/AAID-JOI-D-10-00174
- Asvanund P. A strain gauge analysis comparing external and internal implant-abutment connections. Implant Dent 2014;23:206-11. https://doi.org/10.1097/ID.0000000000000063
- Albrektsson T, Dahlin C, Jemt T, Sennerby L, Turri A, Wennerberg A. Is marginal bone loss around oral implants the result of a provoked foreign body reaction? Clin Implant Dent Relat Res 2014;16:155-65. https://doi.org/10.1111/cid.12142
- Nishioka RS, de Vasconcellos LG, de Melo Nishioka LN. External hexagon and internal hexagon in straight and offset implant placement: strain gauge analysis. Implant Dent 2009;18:512-20. https://doi.org/10.1097/ID.0b013e3181bcc621
- Nissan J, Gross M, Shifman A, Assif D. Stress levels for wellfitting implant superstructures as a function of tightening force levels, tightening sequence, and different operators. J Prosth Dent 2001;86:20-3. https://doi.org/10.1067/mpr.2001.115182
- Watanabe F, Uno I, Hata Y, Neuendorff G, Kirsch A. Analysis of stress distribution in a screw-retained implant prosthesis. Int J Oral Maxillofac Implants 2000;15:209-18.
- Al Quran FA, Rashdan BA, Zomar AA, Weiner S. Passive fit and accuracy of three dental implant impression techniques. Quintessence Int 2012;43:119-25.
- Luk HW, Pow EH, McMillan AS, Hui CF. A double casting technique to minimize distortion when constructing fixed partial dentures on implants. J Prosth Dent 2004;91:93-6. https://doi.org/10.1016/j.prosdent.2003.09.013
- Karl M, Holst S. Strain development of screw-retained implant-supported fixed restorations: procera implant bridge versus conventionally cast restorations. Int J Prosthodont 2012;25:166-9.
- Misch CE. Dental implant prosthetics. 2nd ed. St. Louis; CV Mosby; 2014. p. 747.
- Maeda Y, Satoh T, Sogo M. In vitro differences of stress concentrations for internal and external hex implant-abutment connections: a short communication. J Oral Rehabil 2006;33:75-8. https://doi.org/10.1111/j.1365-2842.2006.01545.x
- Heckmann SM, Karl M, Wichmann MG, Winter W, Graef F, Taylor TD. Cement fixation and screw retention: parameters of passive fit. An in vitro study of three-unit implant-supported fixed partial dentures. Clin Oral Implants Res 2004;15:466-73. https://doi.org/10.1111/j.1600-0501.2004.01027.x
- Karl M, Taylor TD. Bone adaptation induced by non-passively fitting implant superstructures: A randomized clinical trial. Int J Oral Maxillofac Implants 2016;31:369-75. https://doi.org/10.11607/jomi.4331
- Im SM, Kim DG, Park CJ, Cha MS, Choi LR. Biomechanical considerations for the screw of implant prosthesis: A literature review. J Korean Acad Prosthodont 2010;48:61-8. https://doi.org/10.4047/jkap.2010.48.1.61
- Huang Y, Wang J. Mechanism of and factors associated with the loosening of the implant abutment screw: A review. J Esthet Restor Dent 2019;31:338-345. https://doi.org/10.1111/jerd.12494
- Matsuzaki M, Ayukawa Y, Sakai N, Matsuzaki T, Matsushita Y, Koyano K. A comparison of the peri-implant bone stress generated by the preload with screw tightening between 'bonded' and 'contact' model. Comput Methods Biomech Biomed Engin 2017;20:393-402. https://doi.org/10.1080/10255842.2016.1236370
- Al-Otaibi HN, Akeel RF. The effects of two torque values on the screw preload of implant-supported prostheses with passive fit or misfit. Int J Oral Maxillofac Implants 2014;29:1058-63. https://doi.org/10.11607/jomi.3419
- Wentaschek S, Tomalla S, Schmidtmann I, Lehmann KM. Preload, coefficient of friction, and thread friction in an implant-abutment-screw complex. Int J Prosthodont 2017;30:542-4. https://doi.org/10.11607/ijp.5286
- Rutkunas V, Larsson C, Vult von Steyern P, Mangano F, Gedrimiene A. Clinical and laboratory passive fit assessment of implant-supported zirconia restorations fabricated using conventional and digital workflow. Clin Implant Dent Relat Res 2020;22:237-45. https://doi.org/10.1111/cid.12885
- Siamos G, Winkler S, Boberick KG. Relationship between implant preload and screw loosening on implant-supported prostheses. J Oral Implantol 2002;28:67-73. https://doi.org/10.1563/1548-1336(2002)028<0067:TRBIPA>2.3.CO;2
- Zipprich H, Rathe F, Pinz S, Schlotmann L, Lauer HC, Ratka C. Effects of screw configuration on the preload force of implant-abutment screws. Int J Oral Maxillofac Implants 2018;33:e25-32. https://doi.org/10.11607/jomi.5837
- Lee JH. Axial displacement of internal conical connection abutments under static load. MS Thesis, Kyungpook National University, 2019.