Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis on the Utilization Status of Reverse Engineering in the Construction Industry and Its Improvement Measures

건설산업의 리버스 엔지니어링 활용실태 분석 및 개선방안

  • 한경민 (세명대학교 대학원 건설공학과) ;
  • 조훈희 (고려대학교 건축사회환경공학부) ;
  • 손창백 (세명대학교 건축공학과)
  • Received : 2020.08.20
  • Accepted : 2020.09.16
  • Published : 2020.10.30
⟨ Previous Next ⟩

Abstract

Reverse engineering is a technology that involves acquiring three-dimensional data on shape information by utilizing surveying equipment, and drafting drawings based on the data. Reverse engineering has been actively utilized in other industries, including manufacturing and health care, but only in some cases in the construction industry, and even the existence of the technology was unknown in many cases. Against this backdrop, this study surveyed the status of utilization of reverse engineering in the construction industry, analyzed problems in its utilization and suggested measures to improve in order to promote an understanding and awareness of reverse engineering in the construction industry, and the introduction of the technology.

Keywords

Acknowledgement

이 연구는 2018년도 한국연구재단 기초연구실 지원에 의한 결과의 일부임. 과제번호:2018R1A4A1026027

References

  1. Ma, J. I. (2020). Quantitative evaluation of fire Safety performance of buildings based on BIM reverse engineering, thesis, Sejong University.
  2. Park. S, H. (2014). A Study on the application of 3D scan in architectural research of stone cultural heritage, thesis, Yeungnam University.
  3. Lee, S, S. (2013). A Study on Optimum Acquiring 3D Laser Scanner Information for Reverse Engineering at Interior Remodeling Project, thesis, Sungkyunkwan University.
  4. An, D. (2013). The Concept and Limitation for Practical Use of 3D Scan Data for the Survey Report of Wooden Architectural Heritage-. Focused on Survey Drawings, Journal of the Architectural Institute of Korea, Planning & Design Section, 29(9), 141-149
  5. Cultural Heritage Administration (2018). Guidelines for the Establishment of 3D Scan Data for Cultural Heritage
  6. Yoon, J. S., & Ryu, S. R. (2019). A Study on Improvement of Repair Work Using 3D Scanning. International Fall Conference of Korea Institute of Ecological Architecture and Environment. 19(2), 164-165
  7. Koo, J. B. (2015). "The Study on Recording Method for Buried Cultural Property Using Photo Scanning Technique." Journal of Digital Contents Society, vol. 16, (5), pp.835-847, https://doi.org/10.9728/dcs.2015.16.5.835
  8. Yoon, J, S. (2020). A Study on the Implementation and Utilization of BIM for Wooden Cultural Heritage 3D Scan Data, thesis, Korea University.