Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Optimum Structural Design of Modified Auto-climbing Formwork System

개량형 자동인양 시스템 거푸집의 최적설계

  • 홍건호 (호서대학교 건축공학과) ;
  • 심우경 (호서대학교 건축공학과 대학원)
  • Received : 2020.07.13
  • Accepted : 2020.10.17
  • Published : 2020.10.30
⟨ Previous Next ⟩

Abstract

In this study, an analytical study was conducted on the optimum structural design of modified auto-climbing formwork system that utilizes the steel plates at both ends of the core as a support point in connection with the steel composite core wall structural system. Accordingly, data of optimal design of system components are accumulated through variable studies on the geometrical parameters such as the span and height of the formwork system and the spacing of the horizontal members and form-ties. And weight analysis of the total frame was conducted for increasing the construction ability and reducing the lifting capacity. As a results, the resistance to lateral concrete pressure during pouring of concrete can be controlled by form-tie that connects the formwork, and accordingly, the span of the formwork or the cross-section of the horizontal member may not significantly affect the design of the constituent member. And, the equations for expecting the maximum displacement of formwork and the maximum stress of the form-tie were proposed for designing formwork in various conditions.

Keywords

Acknowledgement

이 연구는 2020년도 도시건축연구사업에 해외진출형 초고층 빌딩 실용화 기술 개발 과제에 의한 결과의 일부임. 과제번호 : 20AUDP-B147698-06

References

  1. ACI Committee 347. (2004). Guide to Formwork For Concrete(ACI 347-04), American Concrete Institute
  2. Hong, G. H., & Shim, W. K. (2019). Development of Corner-Supported Auto Climbing Formwork System, Journal of The Architectural Institute of Korea Structure & Construction, 35(7), 171-178 https://doi.org/10.5659/JAIK_SC.2019.35.7.171
  3. KDS Committee. (2016). Design Standard for Formwork and Support(KDS 21 50 00), Ministry of Land Infrastructure and Transport
  4. Kim, K. D. (1995). Concept of Formwork Design, Magazine of the Korea Concrete Institute, 7(4), 17-25 https://doi.org/10.22636/MKCI.1995.7.4.17
  5. KTEA Committee, (2016). hypothesis construction standard specification, Korea Temporary Equipment Association
  6. Kwon, S. M. (2002). ACS (Automatic Climbing System) Form Construction Technology for High-rise Building Construction, Korea Institute of Building Construction, 2(1), 80-87
  7. Moon, I. S. (2002). Automatic Climbing System, Journal of The Korea Concrete Institute, 14(5), 27-30
  8. Oh, J. H. (2006). The Effect of ACS Construction Method on Highrise Building, Korean Journal of Construction Engineering and Management, 6-11, 228-231
  9. Park, B. J., You, S. K., Kim, J. H., & Kim, J. J. (2012). Comparative Study of Strength and Weakness of System Form in High-rise Building Project, Korea Institute of Building Construction, 12(1), 9-11
  10. Sin, H. W., Kim, G. H., Kim, J., Y., & Cho, H., K. (2007). A Research on a Comparison between the Strength and Weakness of Each Formwork Method in the Core Wall Construction, Journal of The Korea Concrete Institute of Building Construction, 7(4), 153-159 https://doi.org/10.5345/JKIC.2007.7.4.153
  11. Yang, S. H., Cho, J. Y., Cho, J. W., Lee, J. H., & Kim, Y. S (2012). A Study on the Development of Automated Gangform Climbing System for Apartment Housing Construction, Korean Journal of Construction Engineering and Management, 13(1), 53-66 https://doi.org/10.6106/KJCEM.2012.13.1.053