Earthquakes and Structures

  • 제19권4호
  • /
  • Pages.303-313
  • /
  • 2020
  • /
  • 2092-7614(pISSN)
  • /
  • 2092-7622(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Assessment of cyclic behavior of chevron bracing frame system equipped with multi-pipe dampers

  • 투고 : 2020.09.27
  • 심사 : 2020.10.21
  • 발행 : 2020.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

Spacious experimental and numerical investigation has been conducted by researchers to increase the ductility and energy dissipation of concentrically braced frames. One of the most widely used strategies for increasing ductility and energy dissiption, is the use of energy-absorbing systems. In this regard, the cyclic behavior of a chevron bracing frame system equipped with multi-pipe dampers (CBF-MPD) was investigated through finite element method. The purpose of this study was to evaluate and improve the behavior of the CBF using MPDs. Three-dimensional models of the chevron brace frame were developed via nonlinear finite element method using ABAQUS software. Finite element models included the chevron brace frame and the chevron brace frame equipped with multi-pipe dampers. The chevron brace frame model was selected as the base model for comparing and evaluating the effects of multi-tube dampers. Finite element models were then analyzed under cyclic loading and nonlinear static methods. Validation of the results of the finite element method was performed against the test results. In parametric studies, the influence of the diameter parameter to the thickness (D/t) ratio of the pipe dampers was investigated. The results indicated that the shear capacity of the pipe damper has a significant influence on determining the bracing behavior. Also, the results show that the corresponding displacement with the maximum force in the CBF-MPD compared to the CBF, increased by an average of 2.72 equal. Also, the proper choice for the dimensions of the pipe dampers increased the ductility and energy absorption of the chevron brace frame.

키워드

참고문헌

  1. ABAQUS-6.8-1 (2008), Standard User's Manual. Hibbitt, Karlsson and Sorensen, Inc. Version 6.8-1. U.S.A.
  2. Ahmadie Amiri, H., Najafabadi, E.P. and Estekanchi, H.E. (2018), "Experimental and analytical study of Block Slit Damper", J. Construct. Steel Res., 141, 167-178. https://doi.org/10.1016/j.jcsr.2017.11.006.
  3. AISC 341-16 (2016), AISC Committee, Seismic Provisions for Structural Steel Buildings. U.S.A.
  4. ATC-24 (1992), Guidelines for Cyclic Seismic Testing of Components of Steel Structures. California, U.S.A.
  5. ATC-40 (1996), Seismic Evaluation and Retrofit of Concrete Buildings.
  6. Azandariani, M.G., Gholhaki, M., Kafi, M.A. and Zirakian, T. (2020), "Study of effects of beam-column connection and column rigidity on the performance of SPSW system", J. Build. Eng., 101821. https://doi.org/10.1016/j.jobe.2020.101821.
  7. Batterbee, D.C. and Sims, N.D. (2005), "Vibration isolation with smart fluid dampers: a benchmarking study", Smart Struct. Syst., 1(3), 235-256. https://doi.org/10.12989/sss.2005.1.3.235.
  8. Bergman, D. (1987), Evaluation of Cyclic Testing of Steel-Plate Devices for Added Damping and Stiffness. Dept. of Civil Engineering University of Michigan, U.S.A.
  9. Chan, R.W.K. and Albermani, F. (2008), "Experimental study of steel slit damper for passive energy dissipation", Eng. Struct., 30(4), 1058-1066. https://doi.org/10.1016/J.ENGSTRUCT.2007.07.005.
  10. Chen, Z., Dai, Z., Huang, Y. and Bian, G. (2013), "Numerical simulation of large deformation in shear panel dampers using smoothed particle hydrodynamics", Eng. Struct., 48, 245-254. https://doi.org/10.1016/J.ENGSTRUCT.2012.09.008.
  11. Cheraghi, A. and Zahrai, S.M. (2016), "Innovative multi-level control with concentric pipes along brace to reduce seismic response of steel frames", J. Construct. Steel Res., 127, 120-135. https://doi.org/10.1016/J.JCSR.2016.07.024.
  12. Choi, I.R. and Park, H.G. (2008), "Ductility and energy dissipation capacity of shear-dominated steel plate walls", J. Struct. Eng., 134(9), 1495-1507. https://doi.org/10.1061/(ASCE)0733-9445(2008)134:9(1495).
  13. Duan, Y., Ni, Y.Q., Zhang, H., Spencer, B.F., Ko, J.M. and Dong, S. (2019), "Design formulas for vibration control of sagged cables using passive MR dampers", Smart Struct. Syst., 23(6), 537-551. https://doi.org/10.12989/sss.2019.23.6.537.
  14. Eldin, M.N., Kim, J. and Kim, J. (2018), "Optimum distribution of steel slit-friction hybrid dampers based on life cycle cost", Steel Compos. Struct., 27(5), 633-646. https://doi.org/10.12989/scs.2018.27.5.633.
  15. Farghaly, A.A. (2015), "Seismic analysis of 3-D two adjacent buildings connected by viscous dampers with effect of underneath different soil kinds", Smart Struct. Syst., 15(5), 1293-1309. https://doi.org/10.12989/sss.2015.15.5.1293.
  16. FEMA 273-274 (1997), Federal Emergency Management Agency, NEHRP Guidelines and Commentary for the Seismic Rehabilitation of Buildings. Washington, D.C., U.S.A.
  17. FEMA 356 (2000), Federal Emergency Management Agency, Prestandard and Commentary for the Seismic Rehabilitation of Buildings. Washington, D.C., U.S.A.
  18. Gorji Azandariani, M., Abdolmaleki, H. and Gorji Azandariani, A. (2020a), "Numerical and analytical investigation of cyclic behavior of steel ring dampers (SRDs)", Thin-Walled Struct., 151, 106751. https://doi.org/10.1016/j.tws.2020.106751.
  19. Gorji Azandariani, M., Gholhaki, M. and Kafi, M.A. (2020b), "Experimental and numerical investigation of low-yieldstrength (LYS) steel plate shear walls under cyclic loading", Eng. Struct., 203. https://doi.org/10.1016/j.engstruct.2019.109866.
  20. Gorji Azandariani, M., Gorji Azandariani, A. and Abdolmaleki, H. (2020c), "Cyclic behavior of an energy dissipation system with steel dual-ring dampers (SDRDs)", J. Construct. Steel Res., 172, 106145. https://doi.org/10.1016/j.jcsr.2020.106145.
  21. Gray, M.G., Christopoulos, C. and Packer, J.A. (2014), "Cast steel yielding brace system for concentrically braced frames: Concept development and experimental validations", J. Struct. Eng., 140(4), 04013095. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000910.
  22. Hsu, H.L. and Halim, H. (2017), "Improving seismic performance of framed structures with steel curved dampers", Eng. Struct., 130, 99-111. https://doi.org/10.1016/j.engstruct.2016.09.063.
  23. Hsu, H.L. and Halim, H. (2018), "Brace performance with steel curved dampers and amplified deformation mechanisms", Eng. Struct., 175, 628-644. https://doi.org/10.1016/j.engstruct.2018.08.052.
  24. IS2800 (2014), Iranian Code of Practice for Seismic Resistant Design of Buildings, Standard No. 2800. Tehran, Iran.
  25. Kelly, J.M., Skinner, R.I. and Heine, A.J. (1972), "Mechanisms of energy absorption in special devices for use in earthquake resistant structures", Bull. N.Z. Soc. Earthq. Eng., 5(3), 63-88.
  26. Kim, J., Kim, M. and Eldin, M.N. (2017), "Optimal distribution of steel plate slit dampers for seismic retrofit of structures", Steel Compos. Struct., 25(4), 473-484. https://doi.org/10.12989/scs.2017.25.4.473.
  27. Kori, J.G. and Jangid, R.S. (2008), "Semi-active friction dampers for seismic control of structures", Smart Struct. Syst., 4(4), 493-515. https://doi.org/10.12989/sss.2008.4.4.493.
  28. Lor, H.A., Izadinia, M. and Memarzadeh, P. (2019), "Experimental evaluation of steel connections with horizontal slit dampers", Steel Compos. Struct., 32(1), 79-90. https://doi.org/10.12989/scs.2019.32.1.079.
  29. Mahjoubi, S. and Maleki, S. (2016), "Seismic performance evaluation and design of steel structures equipped with dualpipe dampers", J. Construct. Steel Res., 122, 25-39. https://doi.org/10.1016/j.jcsr.2010.03.010.
  30. Maleki, S. and Bagheri, S. (2010a), "Pipe damper, Part I: Experimental and analytical study", J. Construct. Steel Res., 66(8), 1088-1095. https://doi.org/10.1016/j.jcsr.2013.03.004.
  31. Maleki, S. and Bagheri, S. (2010b), "Pipe damper, Part II: Application to bridges", J. Construct. Steel Res., 66(8), 1096-1106. https://doi.org/10.1016/j.jcsr.2010.03.011.
  32. Maleki, S. and Mahjoubi, S. (2013), "Dual-pipe damper", J. Construct. Steel Res., 85, 81-91. https://doi.org/10.1016/j.jcsr.2013.03.004.
  33. Maleki, S. and Mahjoubi, S. (2014), "Infilled-pipe damper", J. Construct. Steel Res., 98, 45-58. https://doi.org/10.1016/j.jcsr.2014.02.015.
  34. Mohammadi, M.M. A., Kheyroddin. A.H.R. (2020), "Performance of innovative composite buckling-restrained fuse for concentrically braced frames under cyclic loading", Steel Compos. Struct., 36(2), 163-177. https://doi.org/10.12989/SCS.2020.36.2.163.
  35. Mohebkhah, A. and Azandariani, M.G. (2020), "Shear resistance of retrofitted castellated link beams: Numerical and limit analysis approaches", Eng. Struct., 203, 109864. https://doi.org/10.1016/j.engstruct.2019.109864.
  36. Oh, S.H., Kim, Y.J. and Ryu, H.S. (2009), "Seismic performance of steel structures with slit dampers", Eng. Struct., 31(9), 1997-2008. https://doi.org/10.1016/j.engstruct.2009.03.003.
  37. Skinner, R.I., Kelly, J.M. and Heine, A.J. (1974), "Hysteretic dampers for earthquake-resistant structures", Earthq. Eng. Struct. Dyn., 3(3), 287-296. https://doi.org/10.1002/eqe.4290030307.
  38. Tsai, K., Chen, H., Hong, C. and Su, Y. (1993), "Design of steel triangular plate energy absorbers for seismic-resistant construction", Earthq. Spectra, 9(3), 505-528. https://doi.org/10.1193/1.1585727.
  39. Vision2000, S. (1995), Performance-based seismic engineering. Structural Engineers Association of California, Sacramento, U.S.A.
  40. Whittaker, A.S., Bertero, V.V., Thompson, C.L. and Alonso, L.J. (1991), "Seismic testing of steel plate energy dissipation devices", Earthq. Spectra, 7(4), 563-604. https://doi.org/10.1193/1.1585644.
  41. Xu, L.Y., Nie, X. and Fan, J.S. (2016), "Cyclic behaviour of lowyield-point steel shear panel dampers", Eng. Struct., 126, 391-404. https://doi.org/10.1016/J.ENGSTRUCT.2016.08.002.
  42. Yeh, C.H., Lu, L.Y., Chung, L.L. and Huang, C.S. (2001), "Test of a full-scale steel frame with TADAS", Earthq. Eng. Eng. Seismol., 3(2).
  43. Zahrai, S.M., and Hosein Mortezagholi, M. (2018), "Cyclic performance of an elliptical-shaped damper with shear diaphragms in chevron braced steel frames", J. Earthq. Eng., 22(7), 1209-1232. https://doi.org/10.1080/13632469.2016.1277436.
  44. Zhang, C., Aoki, T., Zhang, Q. and Wu, M. (2013), "Experimental investigation on the low-yield-strength steel shear panel damper under different loading", J. Construct. Steel Res., 84, 105-113. https://doi.org/10.1016/J.JCSR.2013.01.014.
  45. Zhang, C., Zhang, Z. and Shi, J. (2012), "Development of high deformation capacity low yield strength steel shear panel damper", J. Construct. Steel Res., 75, 116-130. https://doi.org/10.1016/J.JCSR.2012.03.014.