DOI QR코드

DOI QR Code

A Study on Cost Avoidance and Total Life Cycle Cost to Analysis of Effectiveness of the Management of DMSMS

부품단종관리 효용성 분석을 위한 회피비용 및 총수명주기비용에 대한 연구

  • 김시옥 (경북대학교 전기공학과 / 국방기술품질원) ;
  • 백원철 (레오이노비전) ;
  • 김동길 (경일대학교 자율로봇공학과) ;
  • 김흥근 (경북대학교 전기공학과)
  • Received : 2020.07.14
  • Accepted : 2020.10.15
  • Published : 2020.10.31

Abstract

The share of advanced technology in modern weapon systems are gradually increasing, and life cycle of components are shortened due to the rapid speed of technological development. On the other hand, the weapon systems have a characteristic that takes a long time in the requirement stage of weapon to the operation and maintenance stage. Due to inevitably, obsolescence of the main components for parts occurs in the acquisition phase. The obsolescence parts could cause delays in mass production schedules, and further adversely affects operational availability due to poor supply of repair parts during in the maintenance phase. However, business managers are obliged to maximize the performance while minimizing the cost of the total life cycle of the design, production, and operation stages. It is necessary to establish and implement an appropriate components and parts of life cycle management plan. In this research, we analyzed the effectiveness of parts obsolescence management through cost avoidance and total life cycle cost that can be reduced through proper parts obsolescence management.

근래의 무기체계에서 첨단기술이 차지하는 비중은 점차 커지고 있으며, 빠른 기술발전 속도로 인하여 부품의 수명주기가 단축되고 실정이다. 이에 반하여 무기체계는 소요제기단계에서 운영/유지단계까지 오랜 시간이 소모되는 특성이 있다. 이로 인하여, 불가피하게 획득 단계에서 주요부품의 단종이 발생된다. 부품단종은 양산 일정 지연의 지연을 유발할 수 있으며, 나아가 운영유지단계에서는 원활하지 못한 부품 공급으로 운용가용도(Operational Availability)에 나쁜 영향을 미치게 된다. 한편, 사업관리자는 설계, 생산, 운영단계의 총수명주기 비용을 최소화하면서 성능을 극대화할 의무가 있으며, 이를 위해서는 적절한 부품단종관리 계획을 수립하고 이행할 필요가 있다. 본 논문에서는 적절한 부품단종관리를 통하여 절감할 수 있는 회피비용 및 총수명주기비용을 통하여 부품단종관리의 효용성을 분석하였다.

Keywords

References

  1. B. Kim, "Design Conformance Verification of Military FM Radio Set Automatic Test Equipment," J. of the Korea institute of electronic communication sciences, vol. 15, no. 3, 2020, pp. 389-396. https://doi.org/10.13067/JKIECS.2020.15.3.389
  2. P. Singh and P. Sandborn, "Obsolescence Driven Design Refresh Planning for Sustainment-Dominated Systems," The Engineering Economist, vol. 51, no. 2, 2006, pp. 115-139. https://doi.org/10.1080/00137910600695643
  3. K. Park and J. Rhee, "A Study on DMSMS Management for Weapon systems," J. of the Korea Academia-Industrial cooperation Society, vol. 14, no. 11, 2013, pp. 5866-5871. https://doi.org/10.5762/KAIS.2013.14.11.5866
  4. W. Paik and S. Shin, "Research for Proactive and Reactive Obsolescence Management by Aging of Militaries Systems Components," J. of The Institute of Internet, Broadcasting and Communication, vol. 19, no. 6, 2019, pp. 213-218. https://doi.org/10.7236/JIIBC.2019.19.6.213
  5. S. Kim, W. Paik, D. Kim, and H. Kim, "A Study on quality assurance to prevent applying foreign-components procurement counterfeit items of weapon system," J. of the Korea institute of electronic communication sciences, vol. 15, no. 4, 2020, pp. 625 - 636. https://doi.org/10.13067/JKIECS.2020.15.4.625
  6. B. Kim, "A Study on Counterfeit Electronic Parts Identification and Verification Methods to Improve the Reliability of Weapons Systems in Mass Production Phase," J. of the Korea institute of electronic communication sciences, vol. 15, no. 4, 2020, pp. 617 - 624. https://doi.org/10.13067/JKIECS.2020.15.4.617
  7. United States Department of Defense, Diminishing Manufacturing Sources and Material Shortages Cost Metrics, Defense Standardization Program Office, 2015.
  8. D. Feng, P. Singh, and P. Sandborn, "Lifetime Buy Optimization to Minimize Life cycle Cost," Proc. of the 2007 Aging Aircraft Conference, Palm Springs, USA, 2007.
  9. G. Porter, "An Economic Method for Evaluating Electronic Component Obsolescence Solutions," Boeing, 1998.
  10. F. Rojo, R. Roy, E. Shehab, K. Cheruvu, and P. Mason, "A Cost Estimating Framework for Electronic, Electrical and Electromechanical (EEE) Components Obsolescence within the Use-Oriented Product-Service Systems Contracts," J. of Engineering Manufacture, vol. 226, no. 1, 2012, pp. 154-166. https://doi.org/10.1177/0954405411406774