참고문헌
- Me-Chun Li, Xin Ge, and Ur Ryong Cho, "Emulsion Grafting Vinyl Monomers onto Starch for Reinforcement of Styrene-Butadiene Rubber", Macromol. Res., 21, 519 (2013). https://doi.org/10.1007/s13233-013-1052-3
- J. L. Valentin, P. Posadas, A. Marcos-Fernandez, L. Ibarra, and A. Rodriguez, "Effect of a Fatty Amine on Processing and Physical Properties of SBR Compounds Filled With Silane-Silica Particles", J. Appl., 99, 3222 (2006). https://doi.org/10.1002/app.22951
- Z. Rigbi, "Reinforcement of rubber by carbon black", Properties of Polymers, 21 (2005).
- G. Santos, "Road Transport and CO2 Emissions: What are the Challenges?", Transp Policy, 59, 71 (2017). https://doi.org/10.1016/j.tranpol.2017.06.007
- N. Rivers and R. Wigle, "An Evaluation of Policy Options for Reducing Greenhouse Gas Emissions in the Transport Sector: The Cost-Effectiveness of Regulations Versus Emissions Pricing", Laurier Centre for Economic Research and Policy Analysis Working Papers, 107 (2018).
- S. Wolff, "Chemical Aspects of Rubber Reinforcement by Fillers", Rubber Chem. Technol., 69, 3 (1996). https://doi.org/10.5254/1.3538376
- C. M. Flanigan, L. Beyer, D. Klekamp, D. Rohweder, B. Stuck, and E. R. Terrill, "Comparative Study of Silica, Carbon Black and Novel Fillers in Tread Compounds", Rubber World, 245, 5 (2012).
- J. W. Ten Brinke, S. C. Debnath, L. A. Reuvekamp, and J. W. Noordermeer, "Mechanistic Aspects of The Role of Coupling Agents in Silica-Rubber Composites", Compos. Sci. Technol., 63, 8 (2003).
- T. Xu, Z. Jia, S. Wang, Y. Chen, Y. Luo, D. Jia, and Z. Peng, "Self-Crosslinkable Epoxidized Natural Rubber-Silica Hybrids", J. Appl., 134, 14 (2017).
- H. D. Luginsland, J. Frohlich, and A. Wehmeier, "Influence of Different Silanes on the Reinforcement of Silica-Filled Rubber Compounds", Rubber Chem. Technol., 75, 4 (2002).
- S. S. Choi, "Influence of the Silica Content on Rheological Behaviour and Cure Characteristics of Silica-Filled Styrene-Butadiene Rubber Compounds", Polym. Int., 50, 5 (2001). https://doi.org/10.1002/1097-0126(200101)50:1<5::AID-PI653>3.0.CO;2-2
- Y. Gui, J. Zheng, X. Ye, D. Han, M. Xi, and L. Zhang, "Preparation and Performance of Silica/SBR Masterbatches with High Silica Loading by Latex Compounding Method", Compos. Part B-Eng., 85, 130 (2016).
- T. Jesionowski, J. Zurawska, A. Krysztafkiewicz, M. Pokora, D. Waszak, and W. Tylus, "Physicochemical and morphological properties of hydrated silicas precipitated following alkoxysilane surface modification", Appl. Surf. Sci., 205, 212 (2003). https://doi.org/10.1016/S0169-4332(02)01090-5
- T. Jesionowski, F. Ciesielczyk, and A. Krysztafkiewicz, "Influence of selected alkoxysilanes on dispersive properties and surface chemistry of spherical silica precipitated in emulsion media", Mater. Chem. Phys., 119, 65 (2010). https://doi.org/10.1016/j.matchemphys.2009.07.034
- Y. J. Xie, Callum A. S. Hill, Z. F. Xiao, H. Militz, and C. Mai, "Silane coupling agents used for natural fiber/polymer compound: A review", Compos. Part A-Appl. S, 41, 806 (2010). https://doi.org/10.1016/j.compositesa.2010.03.005
- W. Kim, B. Ahn, H. Mun, E. Yu, K. Hwang, D. Kim, G. Ryu, and W. Kim, "Effect of Calcium Chloride as a Coagulant on the Properties of ESBR/Silica Wet Masterbatch Compound", Polymers, 10, 1116 (2018). https://doi.org/10.3390/polym10101116
- S. Prasertsri and N. Rattanasom, "Fumed and precipitated silica reinforced natural rubber compound prepared from latex system: Mechanical and dynamic properties", Polym. Test., 31, 593 (2012). https://doi.org/10.1016/j.polymertesting.2012.03.003
- Z. R. Chen, S. Araki, W. M. Cole, W. Hergenrother, and S. Warren. "Solution Masterbatch Process Using Fine Particle Silica for Low Hysteresis Rubber", U.S. Patent, 7,312,271 (2007).
- P. J. Wallen, G. C. Bowman, H. A. Colvin, C. J. Hardiman, and J. E. R. Reyna, "Processes for Making Silane, Hydrophobated Silica,Silica Masterbatch and Rubber Products", U.S. Patent, 8,357,733 (2013).
- K. W. Stockelhuber, A. Das, R. Jurk, and G. Heinrich, "Contribution of physico-chemical properties of interfaces on dispersibility, adhesion and flocculation of filler particles in rubber", Polymers, 51, 1954 (2010). https://doi.org/10.1016/j.polymer.2010.03.013
- Q. Liu, Y. Zhang, and H. Xu, "Properties of vulcanized rubber nanocomposites filled with nanokaolin and precipitated silica" Appl Clay Sci, 42, 232 (2008). https://doi.org/10.1016/j.clay.2007.12.005
- C. Zhang, Z. Tang, B. Guo, and L. Zhang, "Concurrently improved dispersion and interfacial interaction in rubber/nanosilica composites via efficient hydrosilane functionalization", Compos. Sci. Technol., 169, 217 (2019). https://doi.org/10.1016/j.compscitech.2018.11.016
- J. Y. Lee, T. Lee, K. Kim, B. Kim, G. Kwag, J. Y. Kim, and H. J. Paik, "Poly (styrene‐r‐butadiene)‐b‐poly (poly (ethylene glycol) methyl ether methacrylate) as a silica dispersant in rubber compounds", Polym. Int., 63, 908 (2014). https://doi.org/10.1002/pi.4644
- Surya, I., Ismail, H., and Azura, A. R., "Alkanolamide as an accelerator, filler-dispersant and a plasticizer in silica-filled natural rubber compounds", Polym. Test, 32, 1313 (2013). https://doi.org/10.1016/j.polymertesting.2013.07.015
- Siddharth Butani and Sachin Mane, "Coagulation/Flocculation Process for Cationic and Anionic Dye Removal using Water Treatment Residuals", IJESC, 7, 13476 (2017).
-
D. Dondi, A. Buttafava, C. Palamini, F. Pepori, A. Lostritto, L.Giannini, M. Nahmias, L. Conzatti, and A. Faucitano, "
${\gamma}$ -RadiationInduced Functional Modification of Silica and Radiation Vulcanization of SBR-Silica compound", Macromol. Symp., 301, 90 (2011). https://doi.org/10.1002/masy.201150312 - K. Gopalan Nair and A. Dufresne, "Crab shell chitin whisker reinforced natural rubber nanocomposites. 1. Processing and swelling behavior", Biomacromolecules, 4, 657 (2003). https://doi.org/10.1021/bm020127b
- W. Helbert, J. Y. Cavaille, and A. Dufresne, "Thermoplastic nanocomposites filled with wheat straw cellulose whiskers. Part I: Processing and mechanical behavior", Polym. Compos., 17, 604 (1996). https://doi.org/10.1002/pc.10650