Advances in concrete construction

  • 제10권4호
  • /
  • Pages.319-332
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Evaluate the effect of steel, polypropylene and recycled plastic fibers on concrete properties

  • Fayed, Sabry (Department of Civil Engineering, Faculty of Engineering, Kafrelsheikh University) ;
  • Mansour, Walid (Department of Civil Engineering, Faculty of Engineering, Kafrelsheikh University)
  • 투고 : 2020.05.06
  • 심사 : 2020.09.11
  • 발행 : 2020.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The impacts of reinforcing concrete matrix with steel fibers, polypropylene fibers and recycled plastic fibers using different volume fractions of 0.15%, 0.5%, 1.5% and 2.5% on the compressive and tensile characteristics are experimentally investigated in the current research. Also, flexural behavior of plain concrete (PC) beams, shear performance of reinforced concrete (RC) beams and compressive characteristics of both PC and RC columns reinforced with recycled plastic fibers were studied. The experimental results showed that the steel fibers improved the splitting tensile strength of concrete higher than both the polypropylene fibers and recycled plastic fibers. The end-hooked steel fibers had a positive effect on the compressive strength of concrete while, the polypropylene fibers, the recycled plastic fibers and the rounded steel fibers had a negative impact. Compressive strength of end-hooked steel fiber specimen with volume fraction of 2.5% exhibited the highest value among all tested samples of 32.48 MPa, 21.83% higher than the control specimen. The ultimate load, stiffness, ductility and failure patterns of PC and RC beams in addition to PC and RC columns strengthened with recycled plastic fibers enhanced remarkably compared to non-strengthened elements. The maximum ultimate load and stiffness of RC column reinforced with recycled plastic fibers with 1.5% volume fraction improved by 21 and 15%, respectively compared to non-reinforced RC column.

키워드

참고문헌

  1. ACI Committee (2011), Building Code Requirements for Structural Concrete (ACI 318-11), American Concrete Institute.
  2. Abbass, W., Khan, M.I. and Mourad, S. (2018), "Evaluation of mechanical properties of steel fiber reinforced concrete with different strengths of concrete", Constr. Build. Mater., 168, 556-569. https://doi.org/10.1016/j.conbuildmat.2018.02.164.
  3. Akcay, B. and Ozsar, D.S. (2019), "Do polymer fibres affect the distribution of steel fibres in hybrid fibre reinforced concretes?", Constr. Build. Mater., 228, 116732. https://doi.org/10.1016/j.conbuildmat.2019.116732.
  4. Al-Masoodi, A.H.H., Kawan, A., Kasmuri, M., Hamid, R. and Khan, M.N.N. (2016), "Static and dynamic properties of concrete with different types and shapes of fibrous reinforcement", Constr. Build. Mater., 104, 247-262. https://doi.org/10.1016/j.conbuildmat.2015.12.037.
  5. Alwesabi, E.A.H., Bakar, B.H.A., Alshaikh, I.M.H. and Akil, H.M. (2020), "Experimental investigation on mechanical properties of plain and rubberised concretes with steel-polypropylene hybrid fibre", Constr. Build. Mater., 233, 117194. https://doi.org/10.1016/j.conbuildmat.2019.117194.
  6. Ashok, M., Jayabalan, P., Saraswathy, V. and Muralidharan, S. (2020), "A study on mechanical properties of concrete including activated recycled plastic waste", Adv. Concrete Constr.. 9(2), 207-2015. https://doi.org/10.12989/acc.2020.9.2.207.
  7. Bayramov, F., Tasdemir, C. and Tasdemir, M.A. (2004), "Optimisation of steel fibre reinforced concretes by means of statistical response surface method", Cement Concrete Compos., 26(6), 665-675. https://doi.org/10.1016/S0958-9465(03)00161-6.
  8. Charron, J.P., Desmettre, C. and Androuet, C. (2020), "Flexural and shear behaviors of steel and synthetic fiber reinforced concretes under quasi-static and pseudo-dynamic loadings", Constr. Build. Mater., 238, 117659. https://doi.org/10.1016/j.conbuildmat.2019.117659.
  9. Elices, M. and Rocco, C.G. (2008), "Effect of aggregate size on the fracture and mechanical properties of a simple concrete", Eng. Fract. Mech., 75(13), 3839-3851. https://doi.org/10.1016/j.engfracmech.2008.02.011.
  10. Fu, C., Ye, H., Wang, K., Zhu, K. and He, C. (2019), "Evolution of mechanical properties of steel fiber-reinforced rubberized concrete (FR-RC)", Compos. Part B: Eng., 160, 158-166. https://doi.org/10.1016/j.compositesb.2018.10.045.
  11. Gomes, R.F., Dias, D.P. and de Andrade Silva, F. (2020), "Determination of the fracture parameters of steel fiber-reinforced geopolymer concrete", Theo. Appl. Fract. Mech., 107, 102568. https://doi.org/10.1016/j.tafmec.2020.102568.
  12. Grunewald, S. and Walraven, J.C. (2001), "Parameter-study on the influence of steel fibers and coarse aggregate content on the fresh properties of self-compacting concrete", Cement Concrete Res., 31(12), 1793-1798. https://doi.org/10.1016/S0008-8846(01)00555-5.
  13. Grzymski, F., Musial, M. and Trapko, T. (2019), "Mechanical properties of fibre reinforced concrete with recycled fibres", Constr. Build. Mater., 198, 323-331. https://doi.org/10.1016/j.conbuildmat.2018.11.183.
  14. Guo, H., Tao, J., Chen, Y., Li, D., Jia, B. and Zhai, Y. (2019), "Effect of steel and polypropylene fibers on the quasi-static and dynamic splitting tensile properties of high-strength concrete", Constr. Build. Mater., 224, 504-514. https://doi.org/10.1016/j.conbuildmat.2019.07.096.
  15. Han, J., Zhao, M., Chen, J. and Lan, X. (2019), "Effects of steel fiber length and coarse aggregate maximum size on mechanical properties of steel fiber reinforced concrete", Constr. Build. Mater., 209, 577-591. https://doi.org/10.1016/j.conbuildmat.2019.03.086.
  16. Khan, M., Cao, M. and Ali, M. (2020), "Cracking behaviour and constitutive modelling of hybrid fibre reinforced concrete", J. Build. Eng., 30, 101272. https://doi.org/10.1016/j.jobe.2020.101272.
  17. Lee, S.J., Hong, Y., Eom, A.H. and Won, J.P. (2018), "Effect of steel fibres on fracture parameters of cementitious composites", Compos. Struct., 204, 658-663. https://doi.org/10.1016/j.compstruct.2018.08.002.
  18. Liu, F., Ding, W. and Qiao, Y. (2020), "Experimental investigation on the tensile behavior of hybrid steel-PVA fiber reinforced concrete containing fly ash and slag powder", Constr. Build. Mater., 241, 118000. https://doi.org/10.1016/j.conbuildmat.2020.118000.
  19. Mazloom, M., Karimpanah, H. and Karamloo, M. (2020), "Fracture behavior of monotype and hybrid fiber reinforced self-compacting concrete at different temperatures", Adv. Concrete Constr., 9(4), 375-386. https://doi.org/10.12989/acc.2020.9.4.375.
  20. Mohammadhosseini, H., Tahir, M.M., Alaskar, A., Alabduljabbar, H. and Alyousef, R. (2020), "Enhancement of strength and transport properties of a novel preplaced aggregate fiber reinforced concrete by adding waste polypropylene carpet fibers", J. Build. Eng., 27, 101003. https://doi.org/10.1016/j.jobe.2019.101003.
  21. Mohammed, A.A. and Rahim, A.A.F. (2020), "Experimental behavior and analysis of high strength concrete beams reinforced with PET waste fiber", Constr. Build. Mater., 244, 118350. https://doi.org/10.1016/j.conbuildmat.2020.118350.
  22. Murthy, A.R. and Ganesh, P. (2019), "Effect of steel fibres and nano silica on fracture properties of medium strength concrete", Adv. Concrete Constr., 7(3), 143-150. DOI: https://doi.org/10.12989/acc.2019.7.3.143.
  23. Pal, S., Shariq, M., Abbas, H., Pandit, A.K. and Masood, A. (2020), "Strength characteristics and microstructure of hooked-end steel fiber reinforced concrete containing fly ash, bottom ash and their combination", Constr. Build. Mater., 247, 118530. https://doi.org/10.1016/j.conbuildmat.2020.118530
  24. Pesic, N., Zivanovic, S., Garcia, R. and Papastergiou, P. (2016), "Mechanical properties of concrete reinforced with recycled HDPE plastic fibres", Constr. Build. Mater., 115, 362-370. https://doi.org/10.1016/j.conbuildmat.2020.118530.
  25. Sabapathy, Y.K., Sabarish, S., Nithish, C.N.A., Ramasamy, S.M. and Krishna, G. (2019), "Experimental study on strength properties of aluminium fibre reinforced concrete", J. King Saud Univ.-Eng. Sci.. https://doi.org/10.1016/j.jksues.2019.12.004.
  26. Sengul, O. (2016), "Mechanical behavior of concretes containing waste steel fibers recovered from scrap tires", Constr. Build. Mater., 122, 649-658. https://doi.org/10.1016/j.conbuildmat.2016.06.113.
  27. Shen, D., Liu, X., Zeng, X., Zhao, X. and Jiang, G. (2020), "Effect of polypropylene plastic fibers length on cracking resistance of high performance concrete at early age", Constr. Build. Mater., 244, 117874. https://doi.org/10.1016/j.conbuildmat.2019.117874.
  28. Shi, X., Park, P., Rew, Y., Huang, K. and Sim, C. (2020), "Constitutive behaviors of steel fiber reinforced concrete under uniaxial compression and tension", Constr. Build. Mater., 233, 117316. https://doi.org/10.1016/j.conbuildmat.2019.117316.
  29. Sivakumar, A. and Santhanam, M. (2007), "Mechanical properties of high strength concrete reinforced with metallic and non-metallic fibres", Cement Concrete Compos., 29(8), 603-608. https://doi.org/10.1016/j.cemconcomp.2007.03.006.
  30. Song, P.S. and Hwang, S. (2004), "Mechanical properties of high-strength steel fiber-reinforced concrete", Constr. Build. Mater., 18(9), 669-673. https://doi.org/10.1016/j.conbuildmat.2004.04.027.
  31. Thomas, J. and Ramaswamy, A. (2007), "Mechanical properties of steel fiber-reinforced concrete", J. Mater. Civil Eng.. 19(5), 385-392. https://doi.org/10.1061/(ASCE)0899-1561(2007)19:5(385).
  32. Trottier, J.F. and Banthia, N. (1994), "Toughness characterization of steel-fiber reinforced concrete", J. Mater. Civil Eng., 6(2), 264-289. https://doi.org/10.1061/(ASCE)0899-1561(1994)6:2(264).
  33. Zhang, P., Li, Q. and Sun, Z. (2012), "Effect of polypropylene fibre on flexural properties of concrete composites containing fly ash and silica fume", Proc. Inst. Mech. Eng., Part L: J. Mater.: Des. Appl, 226(2), 177-181. https://doi.org/10.1177/1464420712437637.
  34. Zhong, H. and Zhang, M. (2020), "Experimental study on engineering properties of concrete reinforced with hybrid recycled tyre steel and polypropylene fibres", J. Clean. Prod., 259, 120914. https://doi.org/10.1016/j.jclepro.2020.120914.