Advances in concrete construction

  • 제10권4호
  • /
  • Pages.301-310
  • /
  • 2020
  • /
  • 2287-5301(pISSN)
  • /
  • 2287-531X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Development of Pozzolanic material from clay

  • Alaskar, Abdulaziz (Department of Civil Engineering, College of Engineering, King Saud University) ;
  • Shah, S.N.R. (Mehran University of Engineering & Technology, SZAB Campus) ;
  • Keerio, Manthar Ali (Quaid e Awam University College of Engineering Science & Technology) ;
  • Phulpoto, Javed Ali (Mehran University of Engineering & Technology, SZAB Campus) ;
  • Baharom, Shahrizan (Department of Civil Engineering, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia) ;
  • Assilzadeh, Hamid (Institute of Research and Development, Duy Tan University) ;
  • Alyousef, Rayed (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Alabduljabbar, Hisham (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University) ;
  • Mohamed, Abdeliazim Mustafa (Department of Civil Engineering, College of Engineering, Prince Sattam bin Abdulaziz University)
  • 투고 : 2019.09.23
  • 심사 : 2020.09.11
  • 발행 : 2020.10.25
⟨ 이전 논문 다음 논문 ⟩

초록

The following paper concentrates on the objective of studying the influences of extent of duration and temperature on the Pozzolanic properties as well as reactivity of locally existing natural clay of Nai Gaj, district Dadu, Sindh Pakistan. The activation of the clay only occurs through heating when temperature in a furnace chamber reaches 600, 700 and 800oC for 1, 2 and 3 hours and at 900 and 1000℃ for 1 and 2 hours. Furthermore, the strength activity index (SAI) of advanced pozzolanic material happens to be identified through 20% cement replacement for different samples of calcined clay as per ASTM C-618. The compressive strength test of samples had been operated for 7 and 28-days curing afterwards. The maximum compressive strength had been seen in mix E in which cement was replaced with clay calcined at 700℃ for 1 hour that is 27.05 MPa that is 24.31% more than that of control mix. The results gathered from the SAI verdicts the optimal activation temperature is 700℃ within a one-hour time period. The SAI at a temperature of 700℃ with a one-hour duration at 28 days is 124.31% which happens to satisfy the requirements of the new Pozzolanic material, in order to be applied in mortar/concrete (i.e., 75%). The Energy- dispersive spectrometry (EDS) along with the X-ray diffraction (XRD) have been carried out in means of verifying whether there is silica content or amorphous silica present in metakaolin that has been developed. The findings gathered from the SAI were validated, as the analysis of XRD verified that there is in fact Pozzolanic activity of developed metakaolin. Additionally, based on observation, the activated metakaolin holds a significant influence on the increase in mortar's compressive strength.

키워드

참고문헌

  1. Afshar, A., Jahandari, S., Rasekh, H., Shariati, M., Afshar, A. and Shokrgozar, A. (2020), "Corrosion resistance evaluation of rebars with various primers and coatings in concrete modified with different additives", Constr. Build. Mater., 262, 120034. https://doi.org/10.1016/j.conbuildmat.2020.120034.
  2. Alaskar, A., Alyousef, R., Alabduljabbar, H., Alrshoudi, F., Mohamed, A.M., Jermsittiparsert, K. and Ho, L.S. (2020a), "Elevated temperature resistance of concrete columns with axial loading", Adv. Concrete Constr., 9(4), 355-365. https://doi.org/10.12989/acc.2020.9.4.355.
  3. Alaskar, A., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L. S., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020b), "Computational analysis of three dimensional steel frame structures through different stiffening members", Steel Compos. Struct., 35(2), 187-197. https://doi.org/10.12989/scs.2020.35.2.187.
  4. Alyousef, R., Alabduljabbar, H., Mohamed, A.M., Alaskar, A., Jermsittiparsert, K. and Ho, L.S. (2020), "A model to develop the porosity of concrete as important mechanical property", Smart Struct. Syst., 26(2), 147-156. https://doi.org/10.12989/sss.2020.26.2.147.
  5. Ambroise, J., Martin-Calle, S. and Pera, J. (1992), "Pozzolanic behavior of thermally activated kaolin", Special Publication, 132, 731-748.
  6. Ambroise, J., Maximilien, S. and Pera, J. (1994), "Properties of metakaolin blended cements", Adv. Cement Bas. Mater., 1(4), 161-168. https://doi.org/10.1016/1065-7355(94)90007-8.
  7. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2010), "Investigation of seismic behaviour of composite structures with concrete filled square steel tubular (CFSST) column by push-over and time-history analyses", Proceedings of the 4th International Conference on Steel & Composite Structures.
  8. Arabnejad Khanouki, M.M., Ramli Sulong, N.H. and Shariati, M. (2011), "Behavior of through beam connections composed of CFSST columns and steel beams by finite element studying", Adv. Mater. Res., 168, 2329-2333 http://dx.doi.org/10.4028/www.scientific.net/AMR.168-170.2329.
  9. Arabnejad Khanouki, M.M., Ramli Sulong, N.H., Shariati, M. and Tahir, M.M. (2016), "Investigation of through beam connection to concrete filled circular steel tube (CFCST) column", J. Constr. Steel Res., 121, 144-162. https://doi.org/10.1016/j.jcsr.2016.01.002.
  10. Armaghani, D.J., Mirzaei, F., Shariati, M., Trung, N.T., Shariati, M. and Trnavac, D. (2020), "Hybrid ANN-based techniques in predicting cohesion of sandy-soil combined with fiber", Geomech. Eng., 20(3), 191. https://doi.org/10.12989/gae.2020.20.3.191.
  11. ASTM, A. (2013), "Standard test method for compressive strength of hydraulic cement mortars (using 2-in. or [50-mm] cube specimens)", Annual Book of ASTM StandardsAnnual Book of ASTM Standards, 4(1), 1-9.
  12. ASTM, C. (2001), 618 (2001), Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use as a Mineral Admixture in Concrete, Annual Book of ASTM Standards, 4, 310-313.
  13. ASTM, C. (2014), Standard Practice for Mechanical Mixing of Hydraulic Cement Pastes and Mortars of Plastic Consistency, ASTM West Conshohocken, PA.
  14. Cao, Y., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alaskar, A., Alabduljabbar, H., Alrshoudi, F. and Mohamed, A.M. (2020a), "Investigation on the monotonic behavior of the steel rack upright-beam column connection", Smart Struct. Syst., 26(1), 103-115. https://doi.org/10.12989/sss.2020.26.1.103.
  15. Cao, Y., Fan, Q., Azar, S.M., Alyousef, R., Yousif, S.T., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H. and Alaskar, A. (2020b), "Computational parameter identification of strongest influence on the shear resistance of reinforced concrete beams by fiber reinforcement polymer", Struct., 27, 118-127. https://doi.org/10.1016/j.istruc.2020.05.031.
  16. Cao, Y., Wakil, K., Alyousef, R., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A. M. (2020c), "Application of extreme learning machine in behavior of beam to column connections", Struct., 5, 861-867. https://doi.org/10.1016/j.istruc.2020.03.058.
  17. Cao, Y., Wakil, K., Alyousef, R., Yousif, S.T., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F. and Mohamed, A.M. (2020d), "Computational earthquake performance of plan-irregular shear wall structures subjected to different earthquake shock situations", Earthq. Struct., 18(5), 567-580. https://doi.org/10.12989/eas.2020.18.5.567.
  18. Chen, C., Shi, L., Shariati, M., Toghroli, A., Mohamad, E.T., Bui, D.T. and Khorami, M. (2019), "Behavior of steel storage pallet racking connection-A review", Steel Compos. Struct., 30(5), 457-469. https://doi.org/10.12989/scs.2019.30.5.457.
  19. Daie, M., Jalali, A., Suhatril, M., Shariati, M., Arabnejad Khanouki, M.M., Shariati, A. and Kazemi-Arbat, P. (2011), "A new finite element investigation on pre-bent steel strips as damper for vibration control", Int. J. Phys. Sci., 6(36), 8044-8050. https://doi.org/10.5897/ijps11.1585.
  20. Davoodnabi, S.M., Mirhosseini, S.M. and Shariati, M. (2019), "Behavior of steel-concrete composite beam using angle shear connectors at fire condition", Steel Compos. Struct., 30(2), 141-147. https://doi.org/10.12989/scs.2019.30.2.141.
  21. Fabbri, B., Gualtieri, S. and Leonardi, C. (2013), "Modifications induced by the thermal treatment of kaolin and determination of reactivity of metakaolin", Appl. Clay Sci., 73, 2-10. https://doi.org/10.1016/j.clay.2012.09.019.
  22. Hamidian, M., Shariati, M., Arabnejad, M. and Sinaei, H. (2011), "Assessment of high strength and light weight aggregate concrete properties using ultrasonic pulse velocity technique", Int. J. Phys. Sci., 6(22), 5261-5266. https://doi.org/10.5897/IJPS11.1081.
  23. He, P., Jia, D., Wang, M. and Zhou, Y. (2010), "Improvement of high-temperature mechanical properties of heat treated Cf/geopolymer composites by Sol-$SiO_2$ impregnation", J. Eur. Ceram. Soc., 30(15), 3053-3061. https://doi.org/10.1016/j.jeurceramsoc.2010.07.031.
  24. Heydari, A. and Shariati, M. (2018), "Buckling analysis of tapered BDFGM nano-beam under variable axial compression resting on elastic medium", Struct. Eng. Mech., 66(6), 737-748. https://doi.org/10.12989/sem.2018.66.6.737.
  25. Hosseinpour, E., Baharom, S., Badaruzzaman, W.H.W., Shariati, M. and Jalali, A. (2018), "Direct shear behavior of concrete filled hollow steel tube shear connector for slim-floor steel beams", Steel Compos. Struct., 26(4), 485-499. https://doi.org/10.12989/scs.2018.26.4.485.
  26. Ismail, M., Shariati, M., Abdul Awal, A.S.M., Chiong, C.E., Sadeghipour Chahnasir, E., Porbar, A., Heydari, A. and Khorami, M. (2018), "Strengthening of bolted shear joints in industrialized ferrocement construction", Steel Compos. Struct., 28(6), 681-690. https://doi.org/10.12989/scs.2018.28.6.681.
  27. Jalali, A., Daie, M., Nazhadan, S.V.M., Kazemi-Arbat, P. and Shariati, M. (2012), "Seismic performance of structures with pre-bent strips as a damper", Int. J. Phys. Sci., 7(26), 4061-4072. https://doi.org/10.5897/IJPS11.1324.
  28. Janotka, I., Puertas, F., Palacios, M., Kuliffayova, M. and Varga, C. (2010), "Metakaolin sand-blended-cement pastes: Rheology, hydration process and mechanical properties", Constr. Build. Mater., 24(5), 791-802. https://doi.org/10.1016/j.conbuildmat.2009.10.028.
  29. Katebi, J., Shoaei-parchin, M., Shariati, M., Trung, N.T. and Khorami, M. (2019), "Developed comparative analysis of metaheuristic optimization algorithms for optimal active control of structures", Eng. Comput., 1-20. https://doi.org/10.1007/s00366-019-00780-7.
  30. Khorami, M., Alvansazyazdi, M., Shariati, M., Zandi, Y., Jalali, A. and Tahir, M. (2017a), "Seismic performance evaluation of buckling restrained braced frames (BRBF) using incremental nonlinear dynamic analysis method (IDA)", Earthq. Struct., 13(6), 531-538. http://dx.doi.org/10.12989/eas.2017.13.6.531.
  31. Khorami, M., Khorami, M., Motahar, H., Alvansazyazdi, M., Shariati, M., Jalali, A. and Tahir, M.M. (2017b), "Evaluation of the seismic performance of special moment frames using incremental nonlinear dynamic analysis", Struct. Eng. Mech., 63(2), 259-268. https://doi.org/10.12989/sem.2017.63.2.259.
  32. Khorramian, K., Maleki, S., Shariati, M., Jalali, A. and Tahir, M. (2017), "Numerical analysis of tilted angle shear connectors in steel-concrete composite systems", Steel Compos. Struct., 23(1), 67-85. https://doi.org/10.12989/scs.2017.23.1.067.
  33. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS One, 10(12), e0144288 https://doi.org/10.1371/journal.pone.0144288.
  34. Khorramian, K., Maleki, S., Shariati, M. and Ramli Sulong, N.H. (2015), "Behavior of tilted angle shear connectors", PLoS one, 10(12), e0144288. https://doi.org/10.1371/journal.pone.0144288.
  35. Li, D., Toghroli, A., Shariati, M., Sajedi, F., Bui, D.T., Kianmehr, P., Mohamad, E.T. and Khorami, M. (2019), "Application of polymer, silica-fume and crushed rubber in the production of Pervious concrete", Smart Struct. Syst., 23(2), 207-214 https://doi.org/10.12989/sss.2019.23.2.207.
  36. Liew, Y.M., Kamarudin, H., Al Bakri, A.M., Luqman, M., Nizar, I.K., Ruzaidi, C.M. and Heah, C.Y. (2012), "Processing and characterization of calcined kaolin cement powder", Constr. Build. Mater., 30, 794-802. https://doi.org/10.1016/j.conbuildmat.2011.12.079.
  37. Lin, T.S., Jia, D.C., He, P.G. and Wang, M.R. (2009), "Thermal-mechanical properties of short carbon fiber reinforced geopolymer matrix composites subjected to thermal load", J. Central South Univ. Tech., 16(6), 881. https://doi.org/10.1007/s11771-009-0146-8
  38. Liu, C., Wu, X., Wakil, K., Jermsittiparsert, K., Ho, L.S., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R. and Mohamed, A.M. (2020), "Computational estimation of the earthquake response for fibre reinforced concrete rectangular columns", Steel Compos. Struct., 34(5), 743-767. https://doi.org/10.12989/scs.2020.34.5.743.
  39. Luo, L., Nguyen, H., Alabduljabbar, H., Alaskar, A., Alrshoudi, F., Alyousef, R., Nguyen, V.D. and Dang, H.M. (2020), "Depiction of concrete structures with seismic separation under faraway fault earthquakes", Adv. Concrete Constr., 9(1), 71-82. https://doi.org/10.12989/acc.2020.9.1.071.
  40. Luo, Z., Sinaei, H., Ibrahim, Z., Shariati, M., Jumaat, Z., Wakil, K., Pham, B.T., Mohamad, E.T. and Khorami, M. (2019), "Computational and experimental analysis of beam to column joints reinforced with CFRP plates", Steel Compos. Struct., 30(3), 271-280. http://dx.doi.org/10.12989/scs.2019.30.3.271.
  41. Mansouri, I., Safa, M., Ibrahim, Z., Kisi, O., Tahir, M. M., Baharom, S. B. and Azimi, M. (2016), "Strength prediction of rotary brace damper using MLR and MARS", Struct. Eng. Mech., 60(3), 471-488. https://doi.org/10.12989/sem.2016.60.3.471.
  42. Mansouri, I., Shariati, M., Safa, M., Ibrahim, Z., Tahir, M. and Petkovic, D. (2019), "Analysis of influential factors for predicting the shear strength of a V-shaped angle shear connector in composite beams using an adaptive neuro-fuzzy technique", J. Intel. Manuf., 30(3), 1247-1257. https://doi.org/10.1007/s10845-019-01493-w.
  43. Milovancevic, M., Marinovic, J.S., Nikolic, J., Kitic, A., Shariati, M., Trung, N.T., Wakil, K. and Khorami, M. (2019), "UML diagrams for dynamical monitoring of rail vehicles", Physica A: Statist. Mech. Appl., 121169. https://doi.org/10.1016/j.physa.2019.121169.
  44. Mohammadhassani, M., Akib, S., Shariati, M., Suhatril, M. and Arabnejad Khanouki, M.M. (2014a), "An experimental study on the failure modes of high strength concrete beams with particular references to variation of the tensile reinforcement ratio", Eng. Fail. Anal., 41, 73-80. https://doi.org/10.1016/j.engfailanal.2013.08.014.
  45. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2013), "Identification of a suitable ANN architecture in predicting strain in tie section of concrete deep beams", Struct. Eng. Mech., 46(6), 853-868. http://dx.doi.org/10.12989/sem.2013.46.6.853.
  46. Mohammadhassani, M., Nezamabadi-Pour, H., Suhatril, M. and Shariati, M. (2014b), "An evolutionary fuzzy modelling approach and comparison of different methods for shear strength prediction of high-strength concrete beams without stirrups", Smart Struct. Syst., 14(5), 785-809. http://dx.doi.org/10.12989/sss.2014.14.5.785.
  47. Mohammadhassani, M., Saleh, A., Suhatril, M. and Safa, M. (2015), "Fuzzy modelling approach for shear strength prediction of RC deep beams", Smart Struct. Syst., 16(3), 497-519. https://doi.org/10.12989/sss.2015.16.3.497.
  48. Mohammadhassani, M., Suhatril, M., Shariati, M. and Ghanbari, F. (2014c), "Ductility and strength assessment of HSC beams with varying of tensile reinforcement ratios", Struct. Eng. Mech., 48(6), 833-848. https://doi.org/10.12989/sem.2013.48.6.833.
  49. Moodi, F., Ramezanianpour, A. and Safavizadeh, A.S. (2011), "Evaluation of the optimal process of thermal activation of kaolins", Scientia Iranica, 18(4), 906-912. https://doi.org/10.1016/j.scient.2011.07.011.
  50. Morsy, M.S. (2005), "Effect of temperature on hydration kinetics and stability of hydration phases of metakaolin-lime sludge-silica fume system", Ceramics-Silikaty, 49(4), 237-241.
  51. Naghipour, M., Niak, K.M., Shariati, M. and Toghroli, A. (2020a), "Effect of progressive shear punch of a foundation on a reinforced concrete building behavior", Steel Compos. Struct., 35(2), 279-294. https://doi.org/10.12989/scs.2020.35.2.279.
  52. Naghipour, M., Yousofizinsaz, G. and Shariati, M. (2020b), "Experimental study on axial compressive behavior of welded built-up CFT stub columns made by cold-formed sections with different welding lines", Steel Compos. Struct., 34(3), 347. https://doi.org/10.12989/scs.2020.34.3.347.
  53. Nasrollahi, S., Maleki, S., Shariati, M., Marto, A. and Khorami, M. (2018), "Investigation of pipe shear connectors using push out test", Steel Compos. Struct., 27(5), 537-543. http://dx.doi.org/10.12989/scs.2018.27.5.537.
  54. Nosrati, A., Zandi, Y., Shariati, M., Khademi, K., Darvishnezhad Aliabad, M., Marto, A., Mu'azu, M., Ghanbari, E., Mandizadeh, M.B. and Shariati, A. (2018), "Portland cement structure and its major oxides and fineness", Smart Struct. Syst., 22(4), 425-432. https://doi.org/10.12989/sss.2018.22.4.425.
  55. Owaid, H.M., Hamid, R.B. and Taha, M.R. (2012), "A review of sustainable supplementary cementitious materials as an alternative to all-Portland cement mortar and concrete", Austra. J. Bas. Appl. Sci., 6(9), 287-303.
  56. Paknahad, M., Shariati, M., Sedghi, Y., Bazzaz, M. and Khorami, M. (2018), "Shear capacity equation for channel shear connectors in steel-concrete composite beams", Steel Compos. Struct., 28(4), 483-494. https://doi.org/10.12989/scs.2018.28.4.483.
  57. Qi, C.C. (2020), "Big data management in the mining industry", Int. J Mineral. Metal. Mater., 27(2), 131-139. https://doi.org/10.1007/s12613-020-2051-y..
  58. Ramezanianpour, A. and Jovein, H.B. (2012), "Influence of metakaolin as supplementary cementing material on strength and durability of concretes", Constr. Build. Mater., 30, 470-479. https://doi.org/10.1016/j.conbuildmat.2011.12.050.
  59. Rashad, A.M. (2013), "Metakaolin as cementitious material: History, scours, production and composition-A comprehensive overview", Constr. Build. Mater., 41, 303-318. https://doi.org/10.1016/j.conbuildmat.2012.12.001.
  60. Razavian, L., Naghipour, M., Shariati, M. and Safa, M. (2020), "Experimental study of the behavior of composite timber columns confined with hollow rectangular steel sections under compression", Struct. Eng. Mech., 74(1), 145-156. https://doi.org/10.12989/sem.2020.74.1.145.
  61. Sabir, B., Wild, S. and Bai, J. (2001), "Metakaolin and calcined clays as pozzolans for concrete: a review", Cement Concrete Compos., 23(6), 441-454. https://doi.org/10.1016/S0958-9465(00)00092-5.
  62. Sadeghipour Chahnasir, E., Zandi, Y., Shariati, M., Dehghani, E., Toghroli, A., Mohamed, E.T., Shariati, A., Safa, M., Wakil, K. and Khorami, M. (2018), "Application of support vector machine with firefly algorithm for investigation of the factors affecting the shear strength of angle shear connectors", Smart Struct. Syst., 22(4), 413-424. http://dx.doi.org/10.12989/sss.2018.22.4.413.
  63. Safa, M., Maleka, A., Arjomand, M.A., Khorami, M. and Shariati, M. (2019), "Strain rate effects on soil-geosynthetic interaction in fine-grained soil", Geomech. Eng., 19(6), 533. https://doi.org/10.12989/gae.2019.19.6.533.
  64. Safa, M., Sari, P.A., Shariati, M., Suhatril, M., Trung, N.T., Wakil, K. and Khorami, M. (2020), "Development of neuro-fuzzy and neuro-bee predictive models for prediction of the safety factor of eco-protection slopes", Physica A: Statist. Mech. Appl., 124046. https://doi.org/10.1016/j.physa.2019.124046.
  65. Safa, M., Shariati, M., Ibrahim, Z., Toghroli, A., Baharom, S.B., Nor, N.M. and Petkovic, D. (2016), "Potential of adaptive neuro fuzzy inference system for evaluating the factors affecting steel-concrete composite beam's shear strength", Steel Compos. Struct., 21(3), 679-688 https://doi.org/10.12989/scs.2016.21.3.679.
  66. Saikia, N., Kato, S. and Kojima, T. (2006), "Thermogravimetric investigation on the chloride binding behaviour of MK-lime paste", Thermochimica Acta, 444(1), 16-25. https://doi.org/10.1016/j.tca.2006.02.012.
  67. Sajedi, F. and Shariati, M. (2019), "Behavior study of NC and HSC RCCs confined by GRP casing and CFRP wrapping", Steel Compos. Struct., 30(5), 417-432. https://doi.org/10.12989/scs.2019.30.5.417.
  68. Samet, B., Mnif, T. and Chaabouni, M. (2007), "Use of a kaolinitic clay as a pozzolanic material for cements: Formulation of blended cement", Cement Concrete Compos., 29(10), 741-749. https://doi.org/10.1016/j.cemconcomp.2007.04.012.
  69. Sari, P.A., Suhatril, M., Osman, N., Mu'azu, M., Dehghani, H., Sedghi, Y., Safa, M., Hasanipanah, M., Wakil, K. and Khorami, M. (2018), "An intelligent based-model role to simulate the factor of safe slope by support vector regression", Eng. Comput., 1-11. https://doi.org/10.1007/s00366-018-0677-4.
  70. Sedghi, Y., Zandi, Y., Shariati, M., Ahmadi, E., Moghimi Azar, V., Toghroli, A., Safa, M., Tonnizam Mohamad, E., Khorami, M. and Wakil, K. (2018), "Application of ANFIS technique on performance of C and L shaped angle shear connectors", Smart Struct. Syst., 22(3), 335-340. https://doi.org/10.12989/sss.2018.22.3.335.
  71. Shah, S., Ramli Sulong, N.H., Shariati, M. and Jumaat, M.Z. (2015), "Steel rack connections: identification of most influential factors and a comparison of stiffness design methods", PloS one, 10(10), e0139422. https://doi.org/10.1371/journal.pone.0139422.
  72. Shah, S., Ramli Sulong, N.H., Shariati, M., Khan, R. and Jumaat, M. (2016a), "Behavior of steel pallet rack beam-to-column connections at elevated temperatures", Thin Wall. Struct., 106, 471-483. https://doi.org/10.1016/j.tws.2016.05.021.
  73. Shah, S., Sulong, N.R., Jumaat, M. and Shariati, M. (2016b), "State-of-the-art review on the design and performance of steel pallet rack connections", Eng. Fail. Anal., 66, 240-258. https://doi.org/10.1016/j.engfailanal.2016.04.017.
  74. Shah, S., Sulong, N.R., Khan, R., Jumaat, M. and Shariati, M. (2016c), "Behavior of industrial steel rack connections", Mech. Syst. Signal Pr., 70, 725-740. https://doi.org/10.1016/j.ymssp.2015.08.026.
  75. Shahabi, S., Ramli Sulong, N.H., Shariati, M., Mohammadhassani, M. and Shah, S. (2016a), "Numerical analysis of channel connectors under fire and a comparison of performance with different types of shear connectors subjected to fire", Steel Compos. Struct., 20(3), 651-669. https://10.12989/scs.2016.20.3.651.
  76. Shahabi, S., Ramli Sulong, N.H., Shariati, M. and Shah, S. (2016b), "Performance of shear connectors at elevated temperatures-A review", Steel Compos. Struct., 20(1), 185-203. https://doi.org/10.12989/scs.2016.20.1.185.
  77. Shariat, M., Shariati, M., Madadi, A. and Wakil, K. (2018), "Computational Lagrangian Multiplier Method by using for optimization and sensitivity analysis of rectangular reinforced concrete beams", Steel Compos. Struct., 29(2), 243-256. https://doi.org/10.12989/scs.2018.29.2.243.
  78. Shariati, A. (2014), "Behaviour of C-shaped angle shear connectors in high strength concrete", M.SC, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  79. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012a), "Investigation of channel shear connectors for composite concrete and steel T-beam", Int. J. Phys. Sci., 7(11), 1828-1831. https://doi.org/10.5897/IJPS11.1604.
  80. Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Shariati, M. (2012b), "Various types of shear connectors in composite structures: A review", Int. J. Phys. Sci., 7(22), 2876-2890.
  81. Shariati, M. (2013), "Behaviour of C-shaped shear connectors in stell concrete composite beams", Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Universiti Malaya.
  82. Shariati, M. (2020), "Evaluation of seismic performance factors for tension-only braced frames", Steel Compos. Struct., 35(4), 599-609. https://doi.org/10.12989/scs.2020.35.4.599.
  83. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2019a), "Comparison of dynamic behavior of shallow foundations based on pile and geosynthetic materials in fine-grained clayey soils", Geomech. Eng., 19(6), 473. https://doi.org/10.12989/gae.2019.19.6.473.
  84. Shariati, M., Azar, S.M., Arjomand, M.A., Tehrani, H.S., Daei, M. and Safa, M. (2020a), "Evaluating the impacts of using piles and geosynthetics in reducing the settlement of fine-grained soils under static load", Geomech. Eng., 20(2), 87-101. https://doi.org/10.12989/gae.2020.20.2.087.
  85. Shariati, M., Faegh, S.S., Mehrabi, P., Bahavarnia, S., Zandi, Y., Masoom, D.R., Toghroli, A., Trung, N.T. and Salih, M.N. (2019b), "Numerical study on the structural performance of corrugated low yield point steel plate shear walls with circular openings", Steel Compos. Struct., 33(4), 569-581. https://doi.org/10.12989/scs.2019.33.4.569.
  86. Shariati, M., Ghorbani, M., Naghipour, M., Alinejad, N. and Toghroli, A. (2020b), "The effect of RBS connection on energy absorption in tall buildings with braced tube frame system", Steel Compos. Struct., 34(3), 393. https://doi.org/10.12989/scs.2020.34.3.393.
  87. Shariati, M., Heyrati, A., Zandi, Y., Laka, H., Toghroli, A., Kianmehr, P., Safa, M., Salih, M. N. and Poi-Ngian, S. (2019c), "Application of waste tire rubber aggregate in porous concrete", Smart Struct. Syst., 24(4), 553-566. https://doi.org/10.12989/sss.2019.24.4.553.
  88. Shariati, M., Mafipour, M.S., Ghahremani, B., Azarhomayun, F., Ahmadi, M., Trung, N.T. and Shariati, A. (2020c), "A novel hybrid extreme learning machine-grey wolf optimizer (ELM-GWO) model to predict compressive strength of concrete with partial replacements for cement", Eng. Comput., 1-23. https://doi.org/10.1007/s00366-020-01081-0.
  89. Shariati, M., Mafipour, M.S., Haido, J.H., Yousif, S.T., Toghroli, A., Trung, N.T. and Shariati, A. (2020d), "Identification of the most influencing parameters on the properties of corroded concrete beams using an Adaptive Neuro-Fuzzy Inference System (ANFIS)", Steel Compos. Struct., 34(1), 155. https://doi.org/10.12989/scs.2020.34.1.155.
  90. Shariati, M., Mafipour, M.S., Mehrabi, P., Ahmadi, M., Wakil, K., Trung, N.T. and Toghroli, A. (2020e), "Prediction of concrete strength in presence of furnace slag and fly ash using Hybrid ANN-GA (Artificial Neural Network-Genetic Algorithm)", Smart Struct. Syst., 25(2), 183. https://doi.org/10.12989/sss.2020.25.2.183.
  91. Shariati, M., Mafipour, M.S., Mehrabi, P., Bahadori, A., Zandi, Y., Salih, M.N., Nguyen, H., Dou, J., Song, X. and Poi-Ngian, S. (2019d), "Application of a hybrid artificial neural network-particle swarm optimization (ANN-PSO) model in behavior prediction of channel shear connectors embedded in normal and high-strength concrete", Appl. Sci., 9(24), 5534. https://doi.org/10.3390/app9245534.
  92. Shariati, M., Mafipour, M.S., Mehrabi, P., Shariati, A., Toghroli, A., Trung, N.T. and Salih, M.N. (2020). "A novel approach to predict shear strength of tilted angle connectors using artificial intelligence techniques", Eng. Comput., 1-21. https://doi.org/10.1007/s00366-019-00930-x.
  93. Shariati, M., Mafipour, M.S., Mehrabi, P., Zandi, Y., Dehghani, D., Bahadori, A., Shariati, A., Trung, N.T., Salih, M.N. and Poi-Ngian, S. (2019e), "Application of Extreme Learning Machine (ELM) and Genetic Programming (GP) to design steel-concrete composite floor systems at elevated temperatures", Steel Compos. Struct., 33(3), 319-332. https://doi.org/10.12989/scs.2019.33.3.319.
  94. Shariati, M., Naghipour, M., Yousofizinsaz, G., Toghroli, A. and Tabarestani, N.P. (2020f), "Numerical study on the axial compressive behavior of built-up CFT columns considering different welding lines", Steel Compos. Struct., 34(3), 377. https://doi.org/10.12989/scs.2020.34.3.377.
  95. Shariati, M., Rafiei, S., Zandi, Y., Fooladvand, R., Gharehaghaj, B., Shariat, A., Trung, N.T., Salih, M.N., Mehrabi, P. and Poi-Ngian, S. (2019f), "Experimental investigation on the effect of cementitious materials on fresh and mechanical properties of self-consolidating concrete", Adv. Concrete Constr., 8(3), 225-237. https://doi.org/10.12989/acc.2019.8.3.225.
  96. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2010), "Experimental and analytical study on channel shear connectors in light weight aggregate concrete", Proceedings of the 4th International Conference on Steel & Composite Structures, July, Sydney.
  97. Shariati, M., Ramli Sulong, N.H. and Arabnejad Khanouki, M.M. (2012c), "Experimental assessment of channel shear connectors under monotonic and fully reversed cyclic loading in high strength concrete", Mater. Des., 34(0), 325-331. https://doi.org/10.1016/j.matdes.2011.08.008.
  98. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Mahoutian, M. (2011a), "Shear resistance of channel shear connectors in plain, reinforced and lightweight concrete", Scientif. Res. Essay., 6(4), 977-983.
  99. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M., Shafigh, P. and Sinaei, H. (2011b), "Assessing the strength of reinforced concrete structures through Ultrasonic Pulse Velocity and Schmidt Rebound Hammer tests", Scientif. Res. Essay., 6(1), 213-220.
  100. Shariati, M., Ramli Sulong, N.H., Arabnejad Khanouki, M.M. and Shariati, A. (2011c), "Experimental and numerical investigations of channel shear connectors in high strength concrete", Proceedings of the 2011 World Congress on Advances in Structural Engineering and Mechanics, Korea.
  101. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Arabnejad Khanouki, M.M. (2015), "Behavior of V-shaped angle shear connectors: experimental and parametric study", Mater. Struct., 49(9), 3909-3926. https://doi.org/10.1617/s11527-015-0762-8.
  102. Shariati, M., Ramli Sulong, N.H., Shariati, A. and Kueh, A.B.H. (2016), "Comparative performance of channel and angle shear connectors in high strength concrete composites: An experimental study", Constr. Build. Mater., 120, 382-392. https://doi.org/10.1016/j.conbuildmat.2016.05.102.
  103. Shariati, M., Ramli Sulong, N.H., Sinaei, H., Arabnejad Khanouki, M.M. and Shafigh, P. (2011d), "Behavior of channel shear connectors in normal and light weight aggregate concrete (Experimental and analytical study)", Adv. Mater. Res., 168, 2303-2307. https://doi.org/10.4028/www.scientific.net/AMR.168-170.2303
  104. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012d), "Behaviour of C-shaped angle shear connectors under monotonic and fully reversed cyclic loading: An experimental study", Mater. Des., 41, 67-73. https://doi.org/10.1016/j.matdes.2012.04.039.
  105. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2012e), "Fatigue energy dissipation and failure analysis of channel shear connector embedded in the lightweight aggregate concrete in composite bridge girders", Fifth International Conference on Engineering Failure Analysis, The Hague, July.
  106. Shariati, M., Ramli Sulong, N.H., Suhatril, M., Shariati, A., Arabnejad Khanouki, M.M. and Sinaei, H. (2013), "Comparison of behaviour between channel and angle shear connectors under monotonic and fully reversed cyclic loading", Constr. Build. Mater., 38, 582-593. https://doi.org/10.1016/j.conbuildmat.2012.07.050.
  107. Shariati, M., Shariati, A., Ramli Sulong, N.H., Suhatril, M. and Arabnejad Khanouki, M.M. (2014), "Fatigue energy dissipation and failure analysis of angle shear connectors embedded in high strength concrete", Eng. Fail Anal., 41, 124-134. https://doi.org/10.1016/j.engfailanal.2014.02.017.
  108. Shariati, M., Tahir, M.M., Wee, T.C., Shah, S., Jalali, A., Abdullahi, M.M. and Khorami, M. (2018), "Experimental investigations on monotonic and cyclic behavior of steel pallet rack connections", Eng. Fail Anal., 85, 149-166. https://doi.org/10.1016/j.engfailanal.2017.08.014.
  109. Shariati, M., Tahmasbi, F., Mehrabi, P., Bahadori, A. and Toghroli, A. (2020g), "Monotonic behavior of C and L shaped angle shear connectors within steel-concrete composite beams: an experimental investigation", Steel Compos. Struct., 35(2), 237-247. https://doi.org/10.12989/scs.2020.35.2.237.
  110. Shariati, M., Toghroli, A., Jalali, A. and Ibrahim, Z. (2017). "Assessment of stiffened angle shear connector under monotonic and fully reversed cyclic loading", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering.
  111. Shariati, M., Trung, N.T., Wakil, K., Mehrabi, P., Safa, M. and Khorami, M. (2019g), "Moment-rotation estimation of steel rack connection using extreme learning machine", Steel Compos. Struct., 31(5), 427-435. https://doi.org/10.12989/scs.2019.31.5.427.
  112. Sinaei, H., Jumaat, M.Z. and Shariati, M. (2011), "Numerical investigation on exterior reinforced concrete Beam-Column joint strengthened by composite fiber reinforced polymer (CFRP)", Int. J. Phys. Sci., 6(28), 6572-6579. https://doi.org/10.5897/IJPS11.1225.
  113. Sinaei, H., Shariati, M., Abna, A.H., Aghaei, M. and Shariati, A. (2012), "Evaluation of reinforced concrete beam behaviour using finite element analysis by ABAQUS", Scientif. Res. Essay., 7(21), 2002-2009. https://doi.org/10.5897/SRE11.1393.
  114. Standard, A. (2010), Standard Test Methods for Compressive Strength of Cylindrical Concrete Specimens, ASTM C39.
  115. Suhatril, M., Osman, N., Sari, P.A., Shariati, M. and Marto, A. (2019), "Significance of surface eco-protection techniques for cohesive soils slope in Selangor, Malaysia", Geotech. Geolog. Eng., 37(3), 2007-2014. https://doi.org/10.1007/s10706-018-0740-3
  116. Tahmasbi, F., Maleki, S., Shariati, M., Ramli Sulong, N.H. and Tahir, M.M. (2016), "Shear capacity of C-shaped and L-shaped angle shear connectors", PLoS One, 11(8), e0156989 https://doi.org/10.1371/journal.pone.0156989.
  117. Taylor-Lange, S.C., Riding, K.A. and Juenger, M.C. (2012), "Increasing the reactivity of metakaolin-cement blends using zinc oxide", Cement Concrete Compos., 34(7), 835-847. https://doi.org/10.1016/j.cemconcomp.2012.03.004.
  118. Tironi, A., Trezza, M.A., Scian, A.N. and Irassar, E.F. (2013), "Assessment of pozzolanic activity of different calcined clays", Cement Concrete Compos., 37, 319-327. https://doi.org/10.1016/j.cemconcomp.2013.01.002.
  119. Toghroli, A. (2015), "Applications of the ANFIS and LR models in the prediction of shear connection in composite beams", University of Malaya.
  120. Toghroli, A., Darvishmoghaddam, E., Zandi, Y., Parvan, M., Safa, M., Abdullahi, M.A.M., Heydari, A., Wakil, K., Gebreel, S.A. and Khorami, M. (2018a), "Evaluation of the parameters affecting the Schmidt rebound hammer reading using ANFIS method", Comput. Concrete, 21(5), 525-530. https://doi.org/10.12989/cac.2018.21.5.525.
  121. Toghroli, A., Mehrabi, P., Shariati, M., Trung, N.T., Jahandari, S. and Rasekh, H. (2020), "Evaluating the use of recycled concrete aggregate and pozzolanic additives in fiber-reinforced pervious concrete with industrial and recycled fibers", Constr. Build. Mater., 252, 118997. https://doi.org/10.1016/j.conbuildmat.2020.118997.
  122. Toghroli, A., Mohammadhassani, M., Suhatril, M., Shariati, M. and Ibrahim, Z. (2014), "Prediction of shear capacity of channel shear connectors using the ANFIS model", Steel Compos. Struct., 17(5), 623-639. http://dx.doi.org/10.12989/scs.2014.17.5.623.
  123. Toghroli, A., Shariati, M., Karim, M.R. and Ibrahim, Z. (2017), "Investigation on composite polymer and silica fume-rubber aggregate pervious concrete", Fifth International Conference on Advances in Civil, Structural and Mechanical Engineering, Zurich, Switzerland.
  124. Toghroli, A., Shariati, M., Sajedi, F., Ibrahim, Z., Koting, S., Mohamad, E.T. and Khorami, M. (2018b), "A review on pavement porous concrete using recycled waste materials", Smart Struct. Syst., 22(4), 433-440. https://doi.org/10.12989/sss.2018.22.4.433.
  125. Toghroli, A., Suhatril, M., Ibrahim, Z., Safa, M., Shariati, M. and Shamshirband, S. (2016), "Potential of soft computing approach for evaluating the factors affecting the capacity of steel-concrete composite beam", J. Intel. Manuf., 1-9. https://doi.org/10.1007/s10845-016-1217-y.
  126. Trung, N.T., Shahgoli, A.F., Zandi, Y., Shariati, M., Wakil, K., Safa, M. and Khorami, M. (2019a), "Moment-rotation prediction of precast beam-to-column connections using extreme learning machine", Struct. Eng. Mech., 70(5), 639-647. https://doi.org/10.12989/sem.2019.70.5.639.
  127. Trung, N.T., Alemi, N., Haido, J.H., Shariati, M., Baradaran, S. and Yousif, S.T. (2019b), "Reduction of cement consumption by producing smart green concretes with natural zeolites", Smart Struct. Syst., 24(3), 415-425. https://doi.org/10.12989/sss.2019.24.3.415.
  128. Vu, D., Stroeven, P. and Bui, V. (2001), "Strength and durability aspects of calcined kaolin-blended Portland cement mortar and concrete", Cement Concrete Compos., 23(6), 471-478. https://doi.org/10.1016/S0958-9465(00)00091-3.
  129. Wang, J., Wu, X.L., Wang, J.X., Liu, C.Z., Lai, Y.M., Hong, Z.K. and Zheng, J.P. (2012), "Hydrothermal synthesis and characterization of alkali-activated slag-fly ash-metakaolin cementitious materials", Micropor. Mesopor. Mater., 155, 186-191. https://doi.org/10.1016/j.micromeso.2012.01.016.
  130. Wei, X., Shariati, M., Zandi, Y., Pei, S., Jin, Z., Gharachurlu, S., Abdullahi, M.M., Tahir, M.M. and Khorami, M. (2018), "Distribution of shear force in perforated shear connectors", Steel Compos. Struct., 27(3), 389-399. http://dx.doi.org/10.12989/scs.2018.27.3.389.
  131. Xie, Q., Sinaei, H., Shariati, M., Khorami, M., Mohamad, E.T. and Bui, D.T. (2019), "An experimental study on the effect of CFRP on behavior of reinforce concrete beam column connections", Steel Compos. Struct., 30(5), 433-441 https://doi.org/10.12989/scs.2019.30.5.433.
  132. Xu, C., Zhang, X., Haido, J.H., Mehrabi, P., Shariati, A., Mohamad, E.T., Nguyen, H. and Wakil, K. (2019), "Using genetic algorithms method for the paramount design of reinforced concrete structures", Struct. Eng. Mech., 71(5), 503-513. https://doi.org/10.12989/sem.2019.71.5.503.
  133. Zandi, Y., Shariati, M., Marto, A., Wei, X., Karaca, Z., Dao, D., Toghroli, A., Hashemi, M.H., Sedghi, Y. and Wakil, K. (2018), "Computational investigation of the comparative analysis of cylindrical barns subjected to earthquake", Steel Compos. Struct., 28(4), 439-447. https://doi.org/10.12989/scs.2018.28.4.439.
  134. Zhang, Y., Sun, W. and Li, Z. (2005), "Hydration process of potassium polysialate (K-PSDS) geopolymer cement", Adv. Cement Res., 17(1), 23-28. https://doi.org/10.1680/adcr.2005.17.1.23.
  135. Zhang, Y.J., Li, S. and Wang, Y.C. (2012), "Microstructural and strength evolutions of geopolymer composite reinforced by resin exposed to elevated temperature", J. Non-Crystal. Solid., 358(3), 620-624. https://doi.org/10.1016/j.jnoncrysol.2011.11.006.
  136. Zhao, X., Fourie, A. and Qi, C.C. (2019), "An analytical solution for evaluating the safety of an exposed face in a paste backfill stope incorporating the arching phenomenon", Int. J. Min. Metal. Mater., 26(10), 1206-1216. https://doi.org/10.1007/s12613-019-1885-7.
  137. Zhao, X., Fourie, A. and Qi, C.C. (2020a), "Mechanics and safety issues in tailing-based backfill: A review", Int. J. Min. Metal. Mater., 27(9), 1165-1178. https://doi.org/10.1007/s12613-020-2004-5.
  138. Zhao, X., Fourie, A., Veenstra, R. and Qi, C.C. (2020b), "Safety of barricades in cemented paste-backfilled stopes", Int. J. Min. Metal. Mater., 27(8), 1054-1064. https://doi.org/10.1007/s12613-020-2006-3.
  139. Zhou, X.T., Su, D.G. and Zhong, M.F. (2008), "Preparation and characterization of metakaolin-phosphate cement", J. Vhongging Univ., 7(1), 28-34.
  140. Ziaei-Nia, A., Shariati, M. and Salehabadi, E. (2018), "Dynamic mix design optimization of high-performance concrete", Steel Compos. Struct., 29(1), 67-75. http://dx.doi.org/10.12989/scs.2018.29.1.067.

Cited by

  1. In-plane varying bending force effects on wave dispersion characteristics of single-layered graphene sheets vol.10, pp.2, 2021, https://doi.org/10.12989/anr.2021.10.2.101
  2. Ionic liquid coated magnetic core/shell CoFe2O4@SiO2 nanoparticles for the separation/analysis of trace gold in water sample vol.10, pp.3, 2020, https://doi.org/10.12989/anr.2021.10.3.295
  3. Smart estimation of automatic approach in enhancing the road safety under AASHTO Standard specification and STM vol.79, pp.3, 2021, https://doi.org/10.12989/sem.2021.79.3.389
  4. Analyzing the energy performance of buildings by neuro-fuzzy logic based on different factors vol.23, pp.12, 2020, https://doi.org/10.1007/s10668-021-01382-4