한국수자원학회논문집 (Journal of Korea Water Resources Association)

  • 제53권9호
  • /
  • Pages.681-690
  • /
  • 2020
  • /
  • 2799-8746(pISSN)
  • /
  • 2799-8754(eISSN)
한국수자원학회 (Korea Water Resources Association)
권호 표지
DOI QR코드

DOI QR Code

최적화 기법을 이용한 빗물이용시설의 저류 용량 결정

Capacity determination for a rainfall harvesting unit using an optimization method

  • Jin, Youngkyu (Department of Civil Engineering, Pukyong National University) ;
  • Kang, Taeuk (Disaster Prevention Research Institute, Pukyong National University) ;
  • Lee, Sangho (Department of Civil Engineering, Pukyong National University) ;
  • Jeong, Taekmun (Department of Civil Engineering, Pukyong National University)
  • 투고 : 2020.07.23
  • 심사 : 2020.08.10
  • 발행 : 2020.09.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

일반적으로 빗물이용시설의 설계 저류 용량은 다양한 시나리오(저류 용량, 공급 보장률, 우수 이용률 등)에 대한 반복적인 계산을 통해 결정된다. 이 방법은 분석에 많은 시간이 소요될 뿐만 아니라 많은 계산이 수반되므로 분석 오류가 나타날 수도 있다. 본 연구에서는 이러한 문제점을 해결하기 위해 최적화 기법을 이용하여 임의의 목표 보장률을 만족하는 최소의 저류 용량을 직접적으로 결정할 수 있는 방법을 제시하였다. 해당 방법은 Python 언어를 이용하여 모의 모형과 입자 군집 최적화를 연계하여 구현되었다. 최적화 기법은 Python의 오픈 소스로 제공되는 pyswarm을 이용하였는데, 해당 알고리즘은 전역 최적해 탐색이 가능하고, 제약조건을 고려할 수 있다. 최적화 기법을 이용한 빗물이용시설의 저류 용량 결정 방법은 인천 청라지구 1공구에 설치된 빗물이용시설의 설계자료에 적용하여 분석의 효율성, 안정성, 정확성을 검증하였다. 본 연구에서 제시한 빗물이용시설의 저류 용량 결정 방법은 현재의 분석 기술 수준을 개선할 수 있으므로 실용적 가치가 있는 것으로 판단된다.

Generally, the design capacity of the rainwater harvesting unit is determined by trial and error method that is repeatedly calculating various analysis scenarios with capacity, reliability, and rainwater utilization ratio, etc. This method not only takes a lot of time to analyze but also involves a lot of calculations, so analysis errors may occur. In order to solve the problem, this study suggested a way to directly determine the minimum capacity to meet arbitrary target reliabilities using the global optimization method. The method was implemented by simulation model with particle swarm optimization (PSO) algorithms using Python language. The pyswarm that is provided as an open-source of python was used as optimization method, that can explore global optimum, and consider constraints. In this study, the developed program was applied to the design data for the rainwater harvesting constructed in Cheongna district 1 in Incheon to verify the efficiency, stability, and accuracy of the analysis. The method of determining the capacity of the rainwater harvesting presented in this study is considered to be of practical value because it can improve the current level of analytical technology.

키워드

참고문헌

  1. Campisano, A., and Modica, C. (2012). "Optimal sizing of storage tanks for domestic rainwater harvesting in Sicily." Resources, Conservation and Recycling, Vol. 63, pp. 9-16. https://doi.org/10.1016/j.resconrec.2012.03.007
  2. Choi, C.H., Park, M.J., Baek, C.W., and Kim, S.D. (2011a). "Application of rainwater harvesting system reliability model based on non-parametric stochastic daily rainfall generator to Haundae district of Busan." Journal of Korean Society on Water Quality, Vol. 27, No. 5, pp. 634-645.
  3. Choi, J.H., Kim, D.M., and Lee, M.H. (2011b). "Active rainwater utilization within apartment complex." Proceedings of 2011 Conference, The Korean Regional Development Association, pp. 1-11.
  4. Eberhart, R., and Kennedy, J. (1995). "A new optimizer using particle swarm theory." Proceedings Sixth International Symposium on Micro Machine and Human Science, IEEE, Nagoya, Japan, pp. 39-43.
  5. Fewkes, A., and Butler, D. (2000). "Simulating the performance of rainwater collection systems using behavioural models." Building Services Engineering Research and Technology, Vol. 21, No. 2, pp. 99-106. https://doi.org/10.1177/014362440002100204
  6. Ghisi, E., Bressan, D.L., and Martini, M. (2007). "Rainwater tank capacity and potential for potable water savings by using rainwater in the residential sector of Southeastern Brazil." Building and Environment, Vol. 42, No. 4, pp. 1654-1666. https://doi.org/10.1016/j.buildenv.2006.02.007
  7. Ghisi, E., and Ferreira, D.F. (2007). "Potential for potable water savings by using rainwater and greywater in a multi-storey residential building in Southern Brazil." Building and Environment, Vol. 42, No. 7, pp. 2512-2522. https://doi.org/10.1016/j.buildenv.2006.07.019
  8. Guo, Y., and Baetz, B.W. (2007). "Sizing of rainwater storage units for green building applications." Journal of Hydrologic Engineering, Vol. 12, No. 2, pp. 197-205. https://doi.org/10.1061/(ASCE)1084-0699(2007)12:2(197)
  9. Han, B. (2016). Design of dimension exchange particle swarm optimization technique with improved convergence performance. Ph. D. dissertation, Hanyang University.
  10. Han, M., Han, M., and Kim S. (2004). "A consideration in determining the tank size of rainwater harvesting system in buildings." Journal of the Korean Society of Water and Wastewater, Vol. 18, No. 2, pp. 99-109.
  11. Handia, L., Tembo, J.M., and Mwiindwa, C. (2003). "Potential of rainwater harvesting in urban Zambia." Physics and Chemistry of the Earth, Vol. 28, pp. 893-896. https://doi.org/10.1016/j.pce.2003.08.016
  12. Imteaz, M.A., Shanableh, A., Rahman, A., and Ahsan, A. (2011). "Optimisation of rainwater tank design from large roofs: A case study in Melbourne, Australia." Resources, Conservation and Recycling, Vol. 55, No. 11, pp. 1022-1029. https://doi.org/10.1016/j.resconrec.2011.05.013
  13. Islam, M.M., Afrin, S., Jadid, R., and Rahman, M.M. (2014). "Development of a design tool for sizing storage tank of rainwater harvesting system in coastal areas of Bangladesh under future climatic scenario." Proceedings 2nd International Conference on Advances in Civil Engineering, CUET, Chittagong, Bangladesh.
  14. Kang, T., Koo, Y., and Lee, S. (2015). "A study on design method and effect analysis of rainwater harvesting facility for efficient use." Journal of the Korean Society of Hazard Mitigation, Vol. 15, No. 2, pp. 353-361. https://doi.org/10.9798/KOSHAM.2015.15.2.353
  15. Korea Institute of Construction Technology (KICT) (2004). Development of rainwater storage and utilization technology. TRKO 200700008684, Ministry of Science and Technology, Korea.
  16. Korea Land Corporation (KLC) (2007). Incheon Cheongna district free economic zone development project-measures to introduce a sound water circulation system. Korea Land Corporation, Korea.
  17. Le, L.M., Ly, H., Pham, B.T., Le, V.M., Pham, T.A., Nguyen, D., Tran, X., and Le, T. (2019). "Hybrid artificial intelligence approaches for predicting buckling damage of steel columns under axial compression." Materials, Vol. 12, No. 10, 1670, pp. 1-18.
  18. Lee, K.T., Lee, C.D., Yang, M.S., and Yu, C.C. (2000). "Probabilistic design of storage capacity for rainwater cistern systems." Journal of Agricultural Engineering and Research, Vol. 77, No. 3, pp. 343-348. https://doi.org/10.1006/jaer.2000.0597
  19. Lee, T.G., and Han, Y.H. (2019). "Improvement of related regulations to accomplish water circulation in ecological architecture: focusing on rainwater utilization status analysis." Journal of Korea Institute of Ecological Architecture and Environment, Vol. 19, No. 5, pp. 93-97.
  20. Matos, C., Santos, C., Pereira, S., Bentes, I., and Imteaz, M. (2013). "Rainwater storage tank sizing: Case study of a commercial building." International Journal of Sustainable Built Environment, Vol. 2, No. 2, pp. 109-118. https://doi.org/10.1016/j.ijsbe.2014.04.004
  21. Panigrahi, B. (2001). Water balance simulation for optimum design of on-farm reservoir in rainfed farming system. Ph. D. dissertation, Indian Institute of Technology, Kharagpur, India.
  22. Park, S., Kim, S., and Kwak, D. (2007). "An analysis of rainwater quality in rainwater harvesting system at dormitories in Seoul National University, Seoul, Korea." Journal of Society of Rain Masters, Vol. 1, No. 1, pp. 96-102.
  23. Quadros, C.S. (2010). Rainwater harvesting case study: FCT/UNL campus. Master thesis, Universidade Nova de Lisboa, Lisbon, Portugal.
  24. Raimondi, A., and Becciu, G. (2014). "Probabilistic design of multi-use rainwater tanks." Procedia Engineering, Vol. 70, pp. 1391-1400. https://doi.org/10.1016/j.proeng.2014.02.154
  25. Santos, C., and Pinto, F.T. (2013). "Analysis of different criteria to size rainwater storage tanks using detailed methods." Resources, Conservation and Recycling, Vol. 71, pp. 1-6. https://doi.org/10.1016/j.resconrec.2012.11.004
  26. Su, M.D., Lin, C.H., Chang, L.F., Kang, J.L., and Lin, M.C. (2009). "A probabilistic approach to rainwater harvesting systems design and evaluation." Resources, Conservation and Recycling, Vol. 53, No. 7, pp. 393-399. https://doi.org/10.1016/j.resconrec.2009.03.005
  27. Villarreal, E.L., and Dixon, A. (2005). "Analysis of a rainwater collection system for domestic water supply in Ringdansen, Norrkoping, Sweden." Building and Environment, Vol. 40, No. 9, pp. 1174-1184. https://doi.org/10.1016/j.buildenv.2004.10.018