DOI QR코드

DOI QR Code

아크릴 반구를 이용한 밀폐조건에 따른 재료별 열 이동특성 분석(II): 건축구조재 종류에 따른 비교

Analysis of Heat Transfer Characteristics by Material Based on Closed Conditions Using Acrylic Hemispheres (II): Comparison by Type of Building Structural Materials

  • YANG, Seung Min (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • KWON, Jun Hyuck (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • KIM, Phil Lip (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University) ;
  • KANG, Seog Goo (Department of Biobased Materials, College of Agriculture and Life Science, Chungnam National University)
  • 투고 : 2019.09.02
  • 심사 : 2020.08.31
  • 발행 : 2020.09.25

초록

본 연구에서는 시멘트, 벽돌, 목재를 이용한 건축모형을 이용하여 직경 900 mm의 밀폐된 환경 속에서 3일간 온도와 상대습도 측정을 통하여 건축소재의 종류에 따른 실내 온도 환경에 미치는 영향과 열 이동 특성에 대해서 비교분석하였다. 건축모형 내부에 설치된 물은 실내에 있는 사람을 나타냈으며 사람에게 어떤 영향을 미치는지 평가하고자 사용되었다. 목조 건축모형은 시멘트, 벽돌 건축물 보다 보온성이 높아 열 손실이 가장 낮은 것으로 나타났다. 각각의 건축 모형의 열적 쾌적성은 온도와 상대습도를 이용하여 산출하였으며 목조 건축 모형은 시멘트, 벽돌 건축 모형보다 더 쾌적한 환경을 조성하는 결과를 도출하였다.

This study used a building model made up of cement, brick, and wood to measure temperature and relative humidity for 3 days in a closed environment with a diameter of 900 mm, and performed a comparative analysis of the effect of types of building materials on the indoor temperature environment and heat transfer characteristics. The water installed inside the building model represented the person in the room and was used to assess how the environment effects the person. Wooden building model showed the lowest heat loss due to the higher thermal insulation properties than cement and brick buildings. The thermal comfort of each building model was calculated using temperature and relative humidity, and the wooden building model created a more pleasant environment than the cement and brick building models.

키워드

참고문헌

  1. Chang, K.K. 2003. Environment-friendly wood house. Review of Architecture and Building Science 47(5): 33-36.
  2. Jang, J.H. 2018. The increasing number of detached houses in Seoul and its related characteristics. Ph.D. Thesis, Seoul National University, Korea.
  3. Jang, J.H., Lee, M., Kang, E.C., Lee, S.M. 2017. Characteristics of low density firberboards for insulation material with different adhesive (I): Thermal insulation performance and physical properties. Journal of the Korean Wood Science and Technology 45(5): 580-587. https://doi.org/10.5658/WOOD.2017.45.5.580
  4. Jang, J.H., Lee, M., Kang, E.C., Lee S.M. 2017. Characteristics of low density fiberboards bonded with different adhesives for thermal insulation (II): Formaldehyde‧Total volatile organic compounds emission properties and combustion shapes. Journal of the Korean Wood Science and Technology 45(5): 580-587. https://doi.org/10.5658/WOOD.2017.45.5.580
  5. Jang, S.K., Seo, S.Y., Park, H.J., Lim, J.Y., Lim, J.H., Lee, W.S. 2007. TVOC emission by test period from liquid phase building materials. Journal of Korean Society for Indoor Environment 4(2): 140-153.
  6. Kang, Y.J., Lee, J.H., Lee, H.Y., Kim, S.M. 2017. Heating and cooling energy demand evaluating of standard houses according to layer component of masonry, concrete and wood frame using PHPP. Journal of the Korean Wood Science and Technology 45(1): 1-11. https://doi.org/10.5658/WOOD.2017.45.1.1
  7. Kim, S.H., Yu, S.G., Seo, J.K., Kim, S.M. 2013. Thermal performance of wooden building envelope by thermal conductivity of structural members. Journal of the Korean Wood Science and Technology 41(6): 515-527. https://doi.org/10.5658/WOOD.2013.41.6.515
  8. Lee, H.H., Bender, D.A. 2009. Far infrared emissivity of wood material-comparing the three heat transfer modes of wood box and aluminum box. Journal of the Korean Wood Science and Technology 37(5): 440-450.
  9. Lee, T.G., Yoo, D.W. 2018. A study on the characteristics of low energy houses in Korea and abroad by structure and energy performance. Architectural Institute of Korea 38(2): 32-33.
  10. Ozcan, C., Korkmaz, M. 2019. Determination of relationship between thermal and mechanical properties of wood material. Journal of the Korean Wood Science and Technology 47(4): 408-417. https://doi.org/10.5658/wood.2019.47.4.408
  11. Pang, S.J., Lee, B.J., Jeong, G.Y. 2017. Insulation saving effect for korean apartment house using Cross-Laminated Timber (CLT). Journal of the Korean Wood Science and Technology 45(6): 846- 856. https://doi.org/10.5658/WOOD.2017.45.6.846
  12. Park, J.M., Kim, D.H., Suh, D.J. 2012. Recent research trends for green building thermal insulation materials. Clean Technology 18(1): 14-21 https://doi.org/10.7464/ksct.2012.18.1.014
  13. Seo, J.K., Kang, Y.J., Kim, S.M. 2016. Wood thermal conductivity database construction for the application of building energy simulation. Journal of the Korea Furniture Society 27(2): 122-127.
  14. Seo, J.K., Jeong, S.G., Kim, S.M. 2017. Thermal bridge and heat transfer analysis for each part in residential building according to construction of wood-based finishing material. Journal of the Korean Wood Science and Technology 45(3): 343-359. https://doi.org/10.5658/WOOD.2017.45.3.343
  15. Yang, S.M., Lee, H.J., Kang, S.G. 2020. Analysis of heat transfer characteristics by materials in closed conditions using acrylic hemisphere (I): Comparison of interior finishing materials. Journal of the Korean Wood Science and Technology 48(2): 217-230. https://doi.org/10.5658/WOOD.2020.48.2.217
  16. Yang, J.M., Cheon, D.Y. 2013. A study on how to improve the performance of the wall between rafters in hanok. International Journal of Ondol 2013: 283-290.