DOI QR코드

DOI QR Code

Experimental study on the strength behavior of cement-stabilized sand with recovered carbon black

  • Chhun, Kean Thai (Department of Civil Engineering, Gangneung-Wonju National University) ;
  • Choo, Hyunwook (Department of Civil Engineering, Kyung Hee University) ;
  • Kaothon, Panyabot (Department of Civil Engineering, Gangneung-Wonju National University) ;
  • Yune, Chan-Young (Department of Civil Engineering, Gangneung-Wonju National University)
  • 투고 : 2020.06.15
  • 심사 : 2020.09.03
  • 발행 : 2020.10.10

초록

Soil-cement stabilization is a type of ground improvement method which has been used to improve the engineering properties of soil. The unconfined compression test is the commonly used method to evaluate the quality of the stabilized soil due to its simplicity, reliability, rapidity and cost-effectiveness. The main objective of this study was to evaluate the effect of recovered carbon black (rCB) on the strength characteristic of cement-stabilized sand. Various rCB contents and water to cement ratios (w/c) were examined. The unconfined compression test on stabilized sand with different curing times was also conducted for a reconstituted specimen. From the test result, it was found that the compressive strength of cement-stabilized sand increased with the increase of the rCB content up to 3% and the curing time and with the decrease of the w/c ratio, showing that the optimum rCB concentration of the tested stabilized sand was around 3%. In addition, a prediction equation was suggested in this study for cement-stabilized sand with rCB as a function of the w/c ratio and rCB concentration at 14 and 28 days of curing.

키워드

과제정보

This work is supported by the Korea Agency for Infrastructure Technology Advancement (KAIA) grant funded by the Ministry of Land, Infrastructure and Transport (Grant 20SCIP-C151438-02/20SCIP-C151585-02). We gratefully acknowledge Mr. Cho Heung-Seok for his support of this project.

참고문헌

  1. Al-Aghbari, M.Y., Mohamedzein, Y.E.A. and Taha, R. (2009), "Stabilisation of desert sands using cement and cement dust", Proc. Inst. Civ. Eng. Ground Improv., 162(3), 145-151. https://doi.org/10.1680/grim.2009.162.3.145.
  2. Ali, A.D., Mohammad, H.S., Oguzhan, O., Gurkan, Y., Arife, A., Mustafa, S. and Mohamed, L. (2016), "Electrical percolation threshold of cementitious composites possessing self-sensing functionality incorporating different carbon-based materials", Smart Mater. Struct., 25(10), 1-15. https://doi.org/10.1088/0964-1726/25/10/105005.
  3. ASTM D 4253-14 (2014), Standard test method for maximum index density and unit weight of soils using a vibratory table, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A., 1-14.
  4. ASTM D 4254-00 (2002), Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A., 1-10.
  5. ASTM D 4254-14 (2014), Standard test method for minimum index density and unit weight of soils and calculation of relative density, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A., 1-9.
  6. ASTM D 854-02 (2002), Standard test method for specific gravity of soil solids by water pycnometer, Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A., 1-7.
  7. ASTM D2487-11 (2011), Standard practice for classification of soils for engineering purposes (Unified soil classification system), Annual Book of ASTM Standards, American Society for Testing and Materials, West Conshohocken, Pennsylvania, U.S.A., 1-12.
  8. Ates, A. (2013), "The effect of polymer-cement stabilization on the unconfined compressive strength of liquefiable soils", Int. J. Poly. Sci., 1-8. http://doi.org/10.1155/2013/356214.
  9. Balapour, M., Hajibandeh, E. and Ramezanianpour, A. (2018), "Engineering properties and durability of mortars containing new nano rice husk ash (RHA), high tech concrete: Where technology and engineering meet", Proceedings of the 2017 Fib Symposium, Maastricht, The Netherlands, June.
  10. Bocci, M., Manganaro, A., Stramazzo, V. and Grilli, A. (2013), "Runway pavement reconstruction with full material recycling: The case of the airport of Treviso", Adv. Mater. Res., 723, 1044-1051. https://doi.org/10.4028/www.scientific.net/AMR.723.1044.
  11. Chen, L., Du, Y.J., Liu, S.Y. and Jin, F. (2011), "Evaluation of cement hydration properties of cement-stabilized lead-contaminated soils using electrical resistivity measurement", J. Hazard. Toxic Radio. Waste, 15(4), 312-320. https://doi.org/10.1061/(ASCE)HZ.1944-8376.0000073.
  12. Dehghanpour, H., Yilmaz, K. and Ipek, M. (2019), "Evaluation of recycled nano carbon black and waste erosion wires in electrically conductive concretes", Constr. Build. Mater., 221(10), 109-121. https://doi.org/10.1016/j.conbuildmat.2019.06.025.
  13. Fan, J., Wang, D. and Qian, D. (2018), "Soil-cement mixture properties and design considerations for reinforced excavation", J. Rock Mech. Geotech. Eng., 10(4), 791-797. https://doi.org/10.1016/j.jrmge.2018.03.004.
  14. Guthrie, W.S., Brown, A.V. and Eggett, D.L. (2007), "Cement stabilization of aggregate base material Blended with reclaimed asphalt pavement" Transport. Res. Rec., 2026(1), 47-53. https://doi.org/10.3141/2026-06.
  15. Huang, J.T. and Airey, D.W. (1998), "Properties of artificially cemented carbonate sand", J. Geotech. Geoenviron. Eng., 124(6), 492-499. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:6(492).
  16. Jackson, J.O. (1974), "The effect of leaching on soil-cement", Int. J. Rock Mech. Min. Sci. Geomech. Abstr., 11(6), 215-219. https://doi.org/10.1016/0148-9062(74)90128-4.
  17. Jauberthie, R., Rendell, F., Rangeard, D. and Molez, L. (2010), "Stabilization of estuarine silt with lime and/or cement", Appl. Clay Sci., 50(3), 395-400. https://doi.org/10.1016/j.clay.2010.09.004.
  18. Kalantari, B. (2011), "Strength evaluation of air cured, cement treated peat with blast furnace slag", Geomech. Eng., 3(3), 207-218. https://doi.org/10.12989/gae.2011.3.3.207.
  19. Kalantari, B., Prasad, A. and Huat, B.B.K. (2010), "Stabilising peat soil with cement and silica fume", Proc. Inst. Civ. Eng. Geotech. Eng., 164(1), 33-39. https://doi.org/10.1680/geng.900044.
  20. Mahedi, M., Cetin, B. and White, D.J. (2018), "Performance evaluation of cement and slag stabilized expansive soils", Transport. Res. Rec., 2672(52), 164-173. https://doi.org/10.1177/0361198118757439.
  21. McCabe, D.E., Merkle, J.G. and Wallin, K. (2005), An introduction to the development and use of the master curve method, ASTM International, West Conshohocken, Pennsylvania, U.S.A.
  22. Moon, S., Vinoth, G., Subramanian, S., Kim, J. and Ku, T. (2020), "Effect of fine particles on strength and stiffness of cement treated sand", Granul. Matter, 22(9), 1-13. https://doi.org/10.1007/s10035-019-0975-6.
  23. Mousavi, S.E. (2016), "Stabilization of compacted clay with cement and/or lime containing peat ash", J. Road Mater. Pav. Des., 18(6), 1304-1321, https://doi.org/10.1080/14680629.2016.1212729.
  24. Nath, B.D., Molla, M.K.A. and Sarkar, G. (2017), "Study on strength behavior of organic soil stabilized with fly ash", Int. Schol. Res. Not., 1-6. https://doi.org/10.1155/2017/5786541.
  25. Park, S.S. (2011), "Unconfined compressive strength and ductility of fiber-reinforced cemented sand", Constr. Build. Mater., 25(2), 1134-1138. https://doi.org/10.1016/j.conbuildmat.2010.07.017.
  26. Ribeiro, D., Neri, R. and Cardoso, R. (2016), "Influence of water content in the UCS of soil-cement mixtures for different cement dosages", Proc. Eng., 143, 59-66. https://doi.org/10.1016/j.proeng.2016.06.008.
  27. Salamatpoor, S., Jafarian, Y. and Hajiannia, A. (2018), "Physical and mechanical properties of sand stabilized by cement and natural zeolite", Eur. Phys. J. Plus, 133(205), 1-13. https://doi.org/10.1140/epjp/i2018-12016-0.
  28. Shalabi, F.I., Mazher, J., Khan, K., Alsuliman, M., Almustafa, I., Mahmoud, W. and Alomran, N. (2019), "Cement-stabilized waste sand as sustainable construction materials for foundations and highway roads", Materials, 12(4), 600. https://doi.org/10.3390/ma12040600.
  29. Shooshpasha, I. and Shirvani, R.A. (2015), "Effect of cement stabilization on geotechnical properties of sandy soils", Geomech. Eng., 8(1), 17-31. https://doi.org/10.12989/gae.2015.8.1.017.
  30. Stracke, F., Jung, J.G., Korf, E.P. and Consoli, N.C. (2012), "The influence of moisture content on tensile and compressive strength of artificially cemented sand", Soils Rocks, 35(3), 303-308.
  31. Tugume, B., Owani, I., Jjuuko, S. and Kalumba, D. (2019), "Performance of lateritic soils stabilized with both crushed rock aggregates and carbon black as a pavement base layer", Proceedings of the 8th International Congress on Environmental Geotechnics, Singapore, October.
  32. Tyagi, A., Liu, Y., Pan, Y.T., Ridhwan, K.B.M. and Lee, F.H. (2018), "Stability of tunnels in cement-admixed soft soils with spatial variability", J. Geotech. Geoenviron. Eng., 144(12), 06018012:1-7. https://doi.org/10.1061/(ASCE)GT.1943-5606.0001988.
  33. Wei, X. and Ku, T. (2019), "New design chart for geotechnical ground improvement: characterizing cement-stabilized sand", Acta Geotech., 15(4), 999-1011. https://doi.org/10.1007/s11440-019-00838-2.
  34. Wen, S. and Chung, D.D.L. (2007), "Partial replacement of carbon fiber by carbon black in multifunctional cement-matrix composites", Carbon, 45(3), 505-513. https://doi.org/10.1016/j.carbon.2006.10.024.
  35. Zhang, D.W., Chen, L. and Liu, S.Y. (2012), "Key parameters controlling electrical resistivity and strength of cement treated soils", J. Central South Univ., 19(10), 2991-2998. https://doi.org/10.1007/s11771-012-1368-8.

피인용 문헌

  1. Mechanical properties and microstructures of stabilised dredged expansive soil from coal mine vol.25, pp.2, 2020, https://doi.org/10.12989/gae.2021.25.2.143