한국안전학회지 (Journal of the Korean Society of Safety)

  • 제35권4호
  • /
  • Pages.1-8
  • /
  • 2020
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

안전인증 대상 위험 기계 및 기구 관련 재해 원인분석

Cause Analysis of Accidents Associated with Dangerous Machines and Devices Subject to Safety Certification

  • 최기흥 (한성대학교 기계시스템공학과)
  • Choi, Gi Heung (Department of Mechanical Systems Engineering, Hansung University)
  • 투고 : 2020.04.02
  • 심사 : 2020.07.27
  • 발행 : 2020.08.31
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

Intensity of accidents associated with dangerous machines and devices are (hereafter items), in general, high compared to other industrial accidents. This study focuses on cause analysis of accidents associated with items that are subject to safety certification. The method is based on automated analysis of abstracts of accidents written in descriptive format. The analysis results indicate that more than 50% of accidents associated with items are caused by technical reasons and nearly 50% of accidents were preventable. More effective prevention of industrial accidents would then be realized by safety certification at the stage of danger generation. Transition from the direct regulation on users to manufacturers is also needed to improve the effectiveness and efficiency of industrial safety system in Korea.

키워드

참고문헌

  1. Yearly Industrial Accident Analysis Report, KOSHA, 2012-2017.
  2. G. H. Choi, "Improvement of Reliability in Cause Analysis of Industrial Accidents", J. Korean Soc. Saf., Vol. 29, No. 6, pp. 1-8, 2014. https://doi.org/10.14346/JKOSOS.2014.29.6.001
  3. Classification of Causes of Deaths in Industrial Accidents, Ministry of Employment and Labor, Korea.
  4. G. H. Choi, "Cause Analysis of Accidents Associated with Industrial Machines and Devices", J. Korean Soc. Saf., Vol. 33, No. 6, pp. 16-21, 2018.
  5. G. H. Choi, "Adjustment of Industrial Machines and Devices Subject to Safety Certification, Self-Declaration of Conformity and Safety Inspection", Research Report, OSHRI, 2018.
  6. G. H. Choi, "Balance and Effectiveness of Direct Regulations on Manufacturers and Users of Industrial Machines", J. Korean Soc. Saf., Vol. 30, No. 1, pp. 1-7, 2015. https://doi.org/10.14346/JKOSOS.2015.30.1.001
  7. G. H. Choi, "Effectiveness of Direct Safety Regulations on Manufacturers and Users of Industrial Machines: Its Implications on Industrial Safety Policies in Korea", SHAW, Vol. 8, pp. 59-66, 2017.
  8. G. H. Choi, "Effectiveness and Balance of Compulsory and Voluntary Safety Certification of Industrial Machines and Devices", J. Korean Soc. Saf., Vol. 31, No. 1, pp. 7-12, 2016. https://doi.org/10.14346/JKOSOS.2016.31.1.007