References
- S. Suman, M.K. Khan, M. Pathak, R.N. Singh, J.K. Chakravartty, Hydrogen in zircaloy: mechanism and its impacts, Int. J. Hydrogen Energy 40 (2015) 5976-5994, https://doi.org/10.1016/J.IJHYDENE.2015.03.049.
- S. Suman, Burst criterion for Indian PHWR fuel cladding under simulated lossof- coolant accident, Nucl. Eng. Technol. (2019), https://doi.org/10.1016/j.net.2019.04.004.
- S. Suman, M.K. Khan, M. Pathak, R.N. Singh, Effects of hydrogen on thermal creep behaviour of Zircaloy fuel cladding, J. Nucl. Mater. 498 (2018) 20-32, https://doi.org/10.1016/J.JNUCMAT.2017.10.015.
- S. Suman, M.K. Khan, M. Pathak, R.N. Singh, Effects of hydride on crack propagation in zircaloy-4, Procedia Eng 173 (2017) 1185-1190, https://doi.org/10.1016/j.proeng.2016.12.105.
-
S. Suman, M.K. Khan, M. Pathak, R.N. Singh, Investigation of elevated-temperature mechanical properties of
${\delta}$ -hydride precipitate in Zircaloy-4 fuel cladding tubes using nanoindentation, J. Alloys Compd. 726 (2017) 107-113, https://doi.org/10.1016/J.JALLCOM.2017.07.321. - S. Suman, M.K. Khan, M. Pathak, R.N. Singh, Effects of D-hydride precipitated at a crack tip on crack instability in Zircaloy-4, Int. J. Energy Res. 42 (2018) 284-292, https://doi.org/10.1002/er.3905.
- S. Suman, M.K. Khan, M. Pathak, R.N. Singh, 3D simulation of hydride-assisted crack propagation in zircaloy-4 using XFEM, Int. J. Hydrogen Energy 42 (2017) 18668-18673, https://doi.org/10.1016/J.IJHYDENE.2017.04.163.
- S. Suman, Influence of hydrogen concentration on burst parameters of Zircaloy-4 cladding tube under simulated loss-of-coolant accident, Nucl. Eng. Technol. (2020) 1-313. https://doi.org/10.1016/j.net.2020.02.009.
- P. Bouffioux, N. Rupa, Impact of hydrogen on plasticity and creep of unirradiated Zircaloy-4 cladding tubes, in: ASTM Spec. Tech. Publ., ASTM, 2000, pp. 399-422, https://doi.org/10.1520/stp14310s.
- N. Rupa, M. Clavel, P. Bouffioux, C. Domain, A. Legris, About the mechanisms governing the hydrogen effect on viscoplasticity of unirradiated fully annealed zircaloy-4 sheet, ASTM Spec. Tech. Publ. 1423 (2002) 811-836.
- D. Setoyama, S. Yamanaka, Indentation creep study of zirconium hydrogen solid solution, J. Alloys Compd. 379 (2004) 193-197, https://doi.org/10.1016/j.jallcom.2004.02.035.
- R. Kishore, Effect of hydrogen on the creep behavior of Zr-2.5%Nb alloy at 723 K, J. Nucl. Mater. 385 (2009) 591-594, https://doi.org/10.1016/j.jnucmat.2009.01.034.
- Y. Il Jung, Y.N. Seol, B.K. Choi, J.Y. Park, Thermal creep of Zircaloy-4 tubes containing corrosion-induced hydrogen, J. Nucl. Mater. 419 (2011) 213-216, https://doi.org/10.1016/j.jnucmat.2011.08.047.
- A. Sarkar, K. Boopathy, J. Eapen, K.L. Murty, Creep behavior of hydrogenated zirconium alloys, J. Mater. Eng. Perform. 23 (2014) 3649-3656, https://doi.org/10.1007/s11665-014-1129-y.
- B. Kombaiah, Transitions in Creep Mechanisms of Zirconium Alloys, North Carolina State University, ProQuest Dissertations Publishing, 2015.
- S. Pathak, D. Stojakovic, R. Doherty, S.R. Kalidindi, Importance of surface preparation on the nano-indentation stress-strain curves measured in metals, J. Mater. Res. 24 (2009) 1142-1155, https://doi.org/10.1557/jmr.2009.0137.
- S. Suman, M.K. Khan, M. Pathak, R.N. Singh, J.K. Chakravartty, Rupture behaviour of nuclear fuel cladding during loss-of-coolant accident, Nucl. Eng. Des. 307 (2016) 319-327, https://doi.org/10.1016/J.NUCENGDES.2016.07.022.
- V.M.F. Marques, B. Wunderle, C. Johnston, P.S. Grant, Nanomechanical characterization of Sn-Ag-Cu/Cu joints-Part 2: nanoindentation creep and its relationship with uniaxial creep as a function of temperature, Acta Mater. 61 (2013) 2471-2480, https://doi.org/10.1016/j.actamat.2013.01.020.
- P. Nautiyal, J. Jain, A. Agarwal, Influence of loading path and precipitates on indentation creep behavior of wrought Mg-6wt% Al-1wt% Zn magnesium alloy, Mater. Sci. Eng. 650 (2016) 183-189, https://doi.org/10.1016/j.msea.2015.10.040.
- P. Nautiyal, J. Jain, A. Agarwal, A comparative study of indentation induced creep in pure magnesium and AZ61 alloy, Mater. Sci. Eng. 630 (2015) 131-138, https://doi.org/10.1016/j.msea.2015.01.075.
- K. Sambhava, P. Nautiyal, J. Jain, Model based phenomenological and experimental investigation of nanoindentation creep in pure Mg and AZ61 alloy, Mater. Des. 105 (2016) 142-151, https://doi.org/10.1016/j.matdes.2016.05.036.
- S.C. Storer, M.E. Fitzpatrick, S.V. Hainsworth, M.A. Rist, Experimental study of room-temperature indentation viscoplastic 'creep' in zirconium, Philos. Mag. A 96 (2016) 2547-2563, https://doi.org/10.1080/14786435.2016.1209310.
- P.S. Phani, W.C. Oliver, A direct comparison of high temperature nanoindentation creep and uniaxial creep measurements for commercial purity aluminum, Acta Mater. 111 (2016) 31-38, https://doi.org/10.1016/j.actamat.2016.03.032.
- R. Goodall, T.W. Clyne, A critical appraisal of the extraction of creep parameters from nanoindentation data obtained at room temperature, Acta Mater. 54 (2006) 5489-5499, https://doi.org/10.1016/j.actamat.2006.07.020.
- D. Peykov, E. Martin, R.R. Chromik, R. Gauvin, M. Trudeau, Evaluation of strain rate sensitivity by constant load nanoindentation, J. Mater. Sci. 47 (2012) 7189-7200, https://doi.org/10.1007/s10853-012-6665-y.
- M.J. Mayo, R.W. Siegel, a. Narayanasamy, W.D. Nix, Mechanical properties of nanophase TiO2 as determined by nanoindentation, J. Mater. Res. 5 (1990) 1073-1082, https://doi.org/10.1557/JMR.1990.1073.
- M.K. Khan, M. Pathak, S. Suman, A. Deo, R. Singh, Burst investigation on zircaloy-4 claddings in inert environment, Ann. Nucl. Energy 69 (2014) 292-300, https://doi.org/10.1016/J.ANUCENE.2014.02.017.
- H.E. Rosinger, P.C. Bera, W.R. Clendening, Steady-state creep of zircaloy-4 fuel cladding from 940 to 1873 K, J. Nucl. Mater. 82 (1979) 286-297, https://doi.org/10.1016/0022-3115(79)90011-4.
- D. Kaddour, S. Frechinet, A.F. Gourgues, J.C. Brachet, L. Portier, A. Pineau, Experimental determination of creep properties of zirconium alloys together with phase transformation, Scripta Mater. 51 (2004) 515-519, https://doi.org/10.1016/j.scriptamat.2004.05.046.
- F.J. Erbacher, H.J. Neitzel, H. Rosinger, H. Schmidt, K. Wiehr, Burst criterion OF zircaloy fuel claddings IN a loss-of-coolant accident, in: ASTM Spec. Tech. Publ., ASTM International, 100 Barr Harbor Drive, PO Box C700, West Conshohocken, PA, 1982, pp. 271-283, https://doi.org/10.1520/stp37058s, 19428-2959.
- H.E. Rosinger, A model to predict the failure of zircaloy-4 fuel sheathing during postulated loca conditions, J. Nucl. Mater. 120 (1984) 41-54, https://doi.org/10.1016/0022-3115(84)90169-7.
- A.T. Donaldson, T. Healey, R.A.L. Horwood, Biaxial Creep Deformation of Zircaloy-4 PWR Fuel Cladding in the Alpha,(alpha + Beta) and Beta Phase Temperature Ranges, 1985.
Cited by
- Deep neural network based prediction of burst parameters for Zircaloy-4 fuel cladding during loss-of-coolant accident vol.52, pp.11, 2020, https://doi.org/10.1016/j.net.2020.04.025
- Impact of hydrogen on rupture behaviour of Zircaloy-4 nuclear fuel cladding during loss-of-coolant accident: a novel observation of failure at multiple locations vol.53, pp.2, 2020, https://doi.org/10.1016/j.net.2020.07.017