The Journal of The Korea Institute of Intelligent Transport Systems (한국ITS학회 논문지)

The Korea Institute of Intelligent Transport Systems (한국ITS학회)
권호 표지
DOI QR코드

DOI QR Code

An Analysis of Test Results Using the New Fusion Weight Conversion Algorithm for High-speed Weigh-In-Motion System

주행시험을 통한 고속축중기의 융합형 중량환산 알고리즘 효과 분석

  • 김종우 ((주)유디엔에스 기술연구소) ;
  • 정영우 ((주)유디엔에스 기술연구소)
  • Received : 2020.07.09
  • Accepted : 2020.08.03
  • Published : 2020.08.31
Download PDF
⟨ Previous Next ⟩

Abstract

High-speed weigh in motion (HS-WIM) is a real-time unmanned system for measuring the weight of a freight-carrying vehicle while it is in motion without controlling vehicle traffic flow or deceleration. In Korea, HS-WIM systems are installed on the national highways and general national ways for pre-selection by law enforcement. In this study, to improve the measurement accuracy of HS-WIM, we devise improvements to the existing integral and peak weight conversion algorithms, and we provide a new fusion algorithm that can be applied to the mat-type HS-WIM. As a result of analyzing vehicle driving tests at a real site, we confirmed the highest level of weight-measuring accuracy.

고속축중기는 통행 흐름의 통제나 속도의 감속 없이 주행 중인 화물차량의 중량을 실시간 무인 검측하는 시스템으로, 국내에서는 축 조작 행위방지 및 주행 중 과적행위 적발을 위해 주로 고속국도 및 일반국도 본선에 설치하여 이동단속반 검차를 위한 사전선별용으로 활용된다. 본 연구에서는 고속축중기의 중량 측정정확도를 법정 기준까지 향상시키고자 기존 적분형 및 첨두형 중량환산 알고리즘에 대한 분석을 통해 개선사항을 제시하고, 매트타입형 고속축중기에 적용할 수 있는 새로운 융합형 알고리즘을 고안하였다. 이 알고리즘을 적용하여 현장 실차 주행시험을 통한 정확도 향상 효과를 분석한 결과, 최상급의 정확도 등급을 확인할 수 있었다.

Keywords

References

  1. Burnos P.(2017), "The Effect of Flexible Pavement Mechanics on the Accuracy of Axle Load Sensors in Vehicle Weigh in Motion Systems," Sensors, vol. 17, no. 9, p.2053. https://doi.org/10.3390/s17092053
  2. Choi Y. H.(2016), "An Effectiveness Analysis of Pilot Enforcement for Overweight Vehicles(Trucks) using High-Speed Weigh-In-Motion System," The Journal of The Korea Institute of Intelligent Transportation Systems, vol. 15, no. 2, pp.63-73. https://doi.org/10.12815/kits.2016.15.2.063
  3. Kim J. H.(2010), "Development and Evaluation of High Speed weigh-in-motion system," Journal of the Korean Society of Road Engineers, vol. 12, no. 3, pp.17-28.
  4. Kim J. W.(2008), "Introduction on the Development of Dynamic WIM System for the Low/Medium Moving Speed using Superbeam Loadcell," International Journal of Highway Engineering, vol. 10, no. 10, pp.493-497.
  5. Kim J. W.(2016), "Study on the Dynamic Load Monitoring Using the Instrumented Vehicle," The Journal of The Korea Institute of Intelligent Transportation Systems, vol. 15, no. 5, pp.99-105.
  6. Kistler Eastern Europe, www.kistler.com, 2020.06.19.
  7. Korea Expressway Corporation(2012), Status of overweight trucks on expressway, pp.27-41.
  8. Kwon S. M.(2010), Development and Implementation of High Speed Weigh-in-Motion System Using Double Diagonal Sensor Array for Overweight Enforcement, Hanyang University Dept. of Transportation Engineering, pp.54-59.
  9. Kwon S. M.(2012), "Overloading Control Effectiveness of Overweight Enforcement System using High-Speed Weigh-In-Motion," International Journal of Highway Engineering, vol. 14, no. 5, pp.179-188. https://doi.org/10.7855/IJHE.2012.14.5.179
  10. Kwon S. M.(2012), "Technical Trends of Overweight Enforcement Using the HS-WIM," Journal of the Korea Institute for Structural Maintenance and Inspection, vol. 16, no. 02, pp.4-12.
  11. National Law Information Center, http://www.law.go.kr/, 2020.06.16.