Smart Structures and Systems

  • 제26권3호
  • /
  • Pages.311-318
  • /
  • 2020
  • /
  • 1738-1584(pISSN)
  • /
  • 1738-1991(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Non-stochastic uncertainty response assessment method of beam and laminated plate using interval finite element analysis

  • Doan, Quoc Hoan (Department of Architectural Engineering, Sejong University) ;
  • Luu, Anh Tuan (Department of Architectural Engineering, Sejong University) ;
  • Lee, Dongkyu (Department of Architectural Engineering, Sejong University) ;
  • Lee, Jaehong (Department of Architectural Engineering, Sejong University) ;
  • Kang, Joowon (Department of Architecture, Yeungnam University)
  • 투고 : 2019.12.20
  • 심사 : 2020.06.04
  • 발행 : 2020.09.25
⟨ 이전 논문 다음 논문 ⟩

초록

The goal of this study is to analytically and non-stochastically generate structural uncertainty behaviors of isotropic beams and laminated composite plates under plane stress conditions by using an interval finite element method. Uncertainty parameters of structural properties considering resistance and load effect are formulated by interval arithmetic and then linked to the finite element method. Under plane stress state, the isotropic cantilever beam is modeled and the laminated composite plate is cross-ply lay-up [0/90]. Triangular shape with a clamped-free boundary condition is given as geometry. Through uncertainties of both Young's modulus for resistance and applied forces for load effect, the change of structural maximum deflection and maximum von-Mises stress are analyzed. Numerical applications verify the effective generation of structural behavior uncertainties through the non-stochastic approach using interval arithmetic and immediately the feasibility of the present method.

키워드

과제정보

his research was supported by a grant (NRF-2020R1A4A2002855) from NRF (National Research Foundation of Korea) funded by MEST (Ministry of Education and Science Technology) of Korean government.

참고문헌

  1. Abdulkadir, T. and Altin, Z.G. (2014), "Statistical analysis of the effect of portland cement mortar's performance containing glazed ceramic waste", J. Eng. Res., 2(1), 133-146.
  2. Aminifar, S. and Marzuki, A. (2013), "Uncertainty in Interval Type-2 Fuzzy Systems", Mathe. Probl. Eng., 2013.
  3. Awwad, E., Hamad, B., Mabsout, M. and Khatib, H. (2014), Structural Behavior of Simply Supported Beams Cast with Hemp-Reinforced Concrete.
  4. Bulleit, W.M. (2008), "Uncertainty in structural engineering", Practice Period. Struct. Des. Constr., 13(1), 24-30. https://doi.org/10.1061/(ASCE)1084-0680(2008)13:1(24)
  5. El-Shami, M.M., Ibrahim, Y.E. and Shuaib, M. (2010), "Structural behavior of architectural glass plates", Alexandria Eng. J., 49(4), 339-348. https://doi.org/10.1016/j.aej.2010.07.001
  6. Garcia, O., Vehi, J., Campos e Matos, J., Abel Henriques, A. and Ramon Casas, J. (2008), "Structural assessment under uncertain parameters via interval analysis", J. Computat. Appl. Mathe., 218(1), 43-52. https://doi.org/10.1016/j.cam.2007.04.047
  7. Gazi, H. and Alhan, C. (2018), "Probabilistic sensitivity of base-isolated buildings to uncertainties", Smart Struct. Syst., Int. J., 22(4), 441-457. https://doi.org/10.12989/sss.2018.22.4.441
  8. Gere, B.J. and Goodno, J.M. (2013), Mechanics of Materials, Cengage Learning, London, UK.
  9. Ghiasia, R. and Ghasemi, M.R. (2018), "Optimization-based method for structural damage detection with consideration of uncertainties-a comparative study", Smart Struct. Syst., Int. J., 22(5), 561-574. https://doi.org/10.12989/sss.2018.22.5.561
  10. Gibson, R.F. (2011), Principles of Composite Material Mechanics, Third Edition, Taylor & Francis
  11. Green, A.E. and Naghdi, P.M. (1982), "A theory of laminated composite plates", IMA J. Appl. Mathe., 29(1), 1-23. https://doi.org/10.1093/imamat/29.1.1
  12. Hahn, H.T. and Tsai, S.W. (1980), Introduction to Composite Materials, Taylor & Francis
  13. Lee, D. (2016), Additive 2D and 3D performance ratio analysis for steel outrigger alternative design.
  14. Lee, D. and Shin, S. (2014), "Advanced high strength steel tube diagrid using TRIZ and nonlinear pushover analysis", J. Constr. Steel Res., 96, 151-158. https://doi.org/10.1016/j.jcsr.2014.01.005
  15. Lee, D. and Shin, S. (2015), "High tensile UL700 frame module with adjustable control of length and angle", J. Constr. Steel Res., 106, 246-257. https://doi.org/10.1016/j.jcsr.2014.12.003
  16. Lee, D. and Shin, S. (2017), Non-stochastic interval factor method-based FEA for structural stress responses with uncertainty.
  17. Lee, D., Kim, Y., Shin, S. and Lee, J. (2016), "Real-time response assessment in steel frame remodeling using position-adjustment drift-curve formulations", Automat. Constr., 62, 57-65. https://doi.org/10.1016/j.autcon.2015.11.002
  18. Leigh, S.J., Bradley, R.J., Purssell, C.P., Billson, D.R. and Hutchins, D.A. (2012), "A simple, low-cost conductive composite material for 3D printing of electronic sensors", PLOS ONE, 7(11), e49365-e49365. https://doi.org/10.1371/journal.pone.0049365
  19. Liu, W., Zhao, H., Yong, Z., Xu, G., Wang, X., Xu, F., Hui, D. and Qiu, Y. (2013), "Improving mechanical and electrical properties of oriented polymer-free multi-walled carbon nanotube paper by spraying while winding", Compos. Part B: Eng., 53, 342-346. https://doi.org/10.1016/j.compositesb.2013.05.043
  20. Mahajan, G.V. and Aher, V.S. (2012), "Composite material: a review over current development and automotive application", Int. J. Scientif. Res. Publicat., 2(11), 1-5.
  21. Manickam, C., Kumar, J., Athijayamani, A. and Diwahar, N. (2015), "Mechanical and wear behaviors of untreated and alkali treated Roselle fiber-reinforced vinyl ester composite", J. Eng. Res., 3(3), 25-25. https://doi.org/10.7603/s40632-015-0025-4
  22. Nasr, D.E., Slika, W.G. and Saad, G.A. (2018), "Uncertainty quantification for structural health monitoring applications", Smart Struct. Syst., Int. J., 22(4), 399-411. https://doi.org/10.12989/sss.2018.22.4.399
  23. Reddy, J.N.E. (1994), Mechanics of Composite Materials - Selected Works of Nicholas J. Pagano, Springer Netherlands
  24. Reddy, J.N. (2004), Mechanics of Laminated Composite Plates and Shells: Theory and Analysis, Second Edition, CRC Press
  25. Reddy, J.N. (2006), Introduction to the Finite Element Method, Third Edition, McGraw-Hill Education, New York.
  26. Sihombing, F. and Torbol, M. (2016), "Analytical fragility curves of a structure subject to tsunami waves using smooth particle hydrodynamics", Smart Struct. Syst., Int. J., 18(6), 1145-1167. https://doi.org/10.12989/sss.2016.18.6.1145
  27. Spellman, F.R. and Whiting, N.E. (2005), Safety Engineering: Principles and Practices, Government Institutes
  28. Srinivas, S. (1973), "A refined analysis of composite laminates", J. Sound Vib., 30(4), 495-507. https://doi.org/10.1016/S0022-460X(73)80170-1
  29. Stanley, K. and John, G.B. (2018), "On the quantitative definition of risk", Risk Anal., 1(1), 11-27. https://doi.org/10.1111/j.1539-6924.1981.tb01350.x
  30. Tao, Z., Huajun, L. and Defu, L. (2012), "Risk assessment method for offshore structure based on global sensitivity analysis", Model. Simul. Eng., 2012. https://doi.org/10.1155/2012/671934
  31. Timoshenko, S. (1983), Strength of Materials, Pt. 2: Advanced Theory and Problems, Krieger Publishing Company
  32. Vinson, J.R. and Sierakowski, R.L. (2012), The behavior of structures composed of composite materials, Springer Netherlands.
  33. Xiao, G., Qingsong, L., Daxu, Z. and Jinghai, G. (2016), "Structural behavior of an air-inflated fabric arch frame", J. Struct. Eng.. 142(2), 4015108-4015108. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001374
  34. Zaitseva, E. (2012), Importance Measures in Reliability Analysis of Healthcare System BT - Human - Computer Systems Interaction: Backgrounds and Applications 2: Part 1, Springer Berlin Heidelberg, Berlin, Heidelberg.
  35. Zhang, Q., Tang, X., Wu, J. and Yang, B. (2019), "Online automatic structural health assessment of the Shanghai Tower", Smart Struct. Syst., Int. J., 24(3), 319-332. https://doi.org/10.12989/sss.2019.24.3.319
  36. Zio, E. (2009), "Reliability engineering: Old problems and new challenges", Reliabil. Eng. Syst. Safe., 94(2), 125-141. https://doi.org/10.1016/j.ress.2008.06.002
  37. Zirakian, T. and Zhang, J. (2015), "Seismic design and behavior of low yield point steel plate shear walls", Int. J. Steel Struct., 15(1), 135-151. https://doi.org/10.1007/s13296-015-3010-8