Journal of the Architectural Institute of Korea (대한건축학회논문집)

Architectural Institute of Korea (대한건축학회)
권호 표지
DOI QR코드

DOI QR Code

Development of Automated Evaluation System for Torsional Irregularity of Hanok

한옥의 자동화된 비틀림비정형 평가시스템 개발

  • 이민위 (명지대학교 대학원 건축학과) ;
  • 김영민 (명지대학교 건축학부)
  • Received : 2020.06.05
  • Accepted : 2020.07.28
  • Published : 2020.08.30
⟨ Previous Next ⟩

Abstract

In this paper, an automated structural design tool for evaluating torsional irregularity of Hanok has been developed using GUI based software. The theoretical basis on the determination of torsional irregularity of Hanok is based on the precedent research of one of the authors. The implemented system can provide useful decision criteria on the seismic design of Hanok in early design stage, and can improve flexibility and accessibility on the design of Hanok by helping designer evaluate seismic resistant characteristics according to various plan configurations and frame variations. The implemented system is consisted of the following procedures, that is, 1) define plan type, 2) define plan configuration, 3) calculate mass center, 4) define lateral resistant capacity of the frames and walls, 5) arrange lateral resistant elements in plan, 6) calculate stiffness center, 7) calculate eccentricity and allowable maximum eccentricity, and 8) evaluate torsional irregularity. The developed system was applied to the two cases of Hanok and the results showed the field-applicability.

Keywords

Acknowledgement

본 연구는 국토교통부 도시건축연구사업(한옥기술개발 3단계)의 연구비지원(20AUDP-B128638-04)에 의해 수행되었습니다.

References

  1. The Architectural Institute of Korea (2016). Korean Building Code-Structural. Kimundang.
  2. Han, J. S., & Kim, C. J. (2005). An Experimental Study on mechanical performance of tenon for analysis of structural system and Modernization of Traditional Wooden Architecture. Journal of the Architectural Institute of Korea, Planning & Design Section, 21(4), 121-128.
  3. Kim, Y. M., Kim, J. H., & Lee, S. G. (2012). Review Structural Safety and Propose Appropriate Sectional Size for New Traditional Korean-Style House. Journal of the Architectural Institute of Korea, Structure & Construction Section, 28(5), 37-44.
  4. Kim, Y. M., & Kim, J. H. (2014). A Study on the Development of Section Tables for Lateral Members of Hanok, Journal of the Architectural Institute of Korea : Structure & Construction Section, 30(2), 37-44. https://doi.org/10.5659/JAIK_SC.2014.30.2.037
  5. Kim, Y. M., Lee, S. G., & Lee, S. H. (2015a). Evaluation of Effective Lateral Stiffness of a Korean traditional Wooden House with New Joint Types, Engineering Structures, 94(1), 113-121. https://doi.org/10.1016/j.engstruct.2015.03.008
  6. Kim, Y. M. (2015b). Structural Check Schemes for the Initial Design of Columns of Hanok for Vertical Loads. Journal of the Architectural Institute of Korea, Structure & Construction Section, 31(11), 21-28.
  7. Kim, Y. M. (2017a). Development of Automated Structural Design Tool for Horizontal Members of Hanok. Journal of the Architectural Institute of Korea, Structure & Construction Section, 33(4), 21-28. https://doi.org/10.5659/JAIK_SC.2017.33.4.21
  8. Kim, Y. M. (2017b). Development of Structural Design Tool of Hanok Columns Considering Rotational Stiffness. Journal of the Architectural Institute of Korea, Structure & Construction Section, 33(8), 29-36.
  9. Kim, Y. M. (2019). An Evaluation Scheme of Torsional Irregularity for Seismic Design of Hanok. Journal of the Architectural Institute of Korea, Structure & Construction Section, 35(10), 191-198.
  10. Lee, S. G., Kim, Y. M., Roh, J. E., Lee, S. H., & Woo, S. S. (2013). Dynamic Characteristics of Traditional and New Korean-style Houses According to Excitation Amplitude. Journal of the Architectural Institute of Korea, Structure & Construction Section, 29(1), 49-58.
  11. National Disaster Management Research Institute (2010). Development of the Seismic Capacity Evaluation Manual on Wooden Structures.
  12. Hwang, J. K., Kwon, Y. H., & Han, D. W. (2019). Shear Resistance Capacity Length of Traditional Wooden Frame's Wall divided into Small Frame. Journal of the Architectural Institute of Korea, Structure & Construction Section, 35(3), 11-18.
  13. Hwang, J. K., Kwon, Y. H., & Han, D. W. (2020). Resistance Moment Capacity of Traditional Wooden Frame's Wall using Brick. Journal of the Architectural Institute of Korea, 36(6), 185-192. https://doi.org/10.5659/JAIK.2020.36.6.185