Computers and Concrete

  • 제26권2호
  • /
  • Pages.151-159
  • /
  • 2020
  • /
  • 1598-8198(pISSN)
  • /
  • 1598-818X(eISSN)
테크노프레스 (Techno-Press)
권호 표지
DOI QR코드

DOI QR Code

Computer modeling and analytical prediction of shear transfer in reinforced concrete structures

  • Kataoka, Marcela N. (Structural Department, Engineering School of Sao Carlos, University of Sao Paulo) ;
  • El Debs, Ana Lucia H.C. (Structural Department, Engineering School of Sao Carlos, University of Sao Paulo) ;
  • Araujo, Daniel de L. (School of Civil and Environmental Engineering, Federal University of Goias) ;
  • Martins, Barbara G. (School of Civil and Environmental Engineering, Federal University of Goias)
  • 투고 : 2019.07.02
  • 심사 : 2020.07.28
  • 발행 : 2020.08.25
⟨ 이전 논문 다음 논문 ⟩

초록

This paper presents an evaluation of shear transfer across cracks in reinforced concrete through finite element modelling (FEM) and analytical predictions. The aggregate interlock is one of the mechanisms responsible for the shear transfer between two slip surfaces of a crack; the others are the dowel action, when the reinforcement contributes resisting a parcel of shear displacement (reinforcement), and the uncracked concrete comprised by the shear resistance until the development of the first crack. The aim of this study deals with the development of a 3D numerical model, which describes the behavior of Z-type push-off specimen, in order to determine the properties of interface subjected to direct shear in terms cohesion and friction angle. The numerical model was validated based on experimental data and a parametric study was performed with the variation of the concrete strength. The numerical results were compared with analytical predictions and a new equation was proposed to predict the maximum shear stress in cracked concrete.

키워드

과제정보

The authors would like to thank the National Council for the Improvement of Higher Education (CAPES) and the National Council for Scientific and Technological Development (CNPq) for the financial support and the LABITECC (Laboratory of Technological Innovation in Civil Construction of the Federal University of Goiás) for running the tests.

참고문헌

  1. ACI Committee 318 (2008), Building Code Requirements for Structural Concrete, (ACI 318M-08) and Commentary, American Concrete Institute, Farmington Hills, MI.
  2. Arani, K.S., Zandi, Y., Pham, B.T., Mu'azu, M.A., Katebi, J., Mohammadhassani, M., Khalafi, S., Mohamad, E.T., Wakil, K. and Khorami, M. (2019), "Computational optimized finite element modelling of mechanical interaction of concrete with fiber reinforced polymer", Comput. Concrete, 23(1), 61-68. https://doi.org/10.12989/cac.2019.23.1.061.
  3. ASCE-ACI Committee 445 on Shear and Torsion (1998), "Recent approaches to shear design of structural concrete", J. Struct. Eng., 124(12), 1375-1417. https://doi.org/10.1061/(ASCE)0733-9445(1998)124:12(1375).
  4. Associacao Brasileira de Normas Tecnicas. NBR 6118 (2014), Design of Concrete Structures - Procedure, Rio de Janeiro. (in Portuguese)
  5. Bu, Z.Y., Zhang, X., Ye, H.H., Xi, K. and Wu, W.Y. (2018), "Interface shear transfer of precast concrete dry joints in segmental columns", Eng. Struct., 175, 257-272. https://doi.org/10.1016/j.engstruct.2018.08.037
  6. Cela, J.J.L. (1998), "Analysis of reinforced concrete structures subjected to dynamic loads with a viscoplastic Drucker-Prager model", Appl. Math. Model., 22(7), 495-515. https://doi.org/10.1016/S0307-904X(98)10050-1.
  7. Chen, W.F. (1982), Plasticity in Reinforced Concrete, McGraw-Hill, New York.
  8. Climaco, J.C.T.S. and Regan, P.E. (2001), "Evaluation of bond strength between old and new concrete in structural repairs", Mag. Concrete Res., 53(6), 377-390. https://doi.org/10.1680/macr.2001.53.6.377.
  9. Echegaray-Oviedo, J., Navarro-Gregori, J., Cuenca, E. and Serna, P. (2013), "Upgrading the push-off test to study the mechanism of shear transfer in FRC elements", VIII International Conference on Fracture Mechanism of Concrete and Concrete structures FraMCoS-8, Tolddo, Spain.
  10. EN 1992-1-1 (2004), Eurocode 2 - Design of Concrete Structures - Part 1 General Rules and Rules for Buildings, European Committee for Standardization, Brussels, Belgium, 225.
  11. Federation Internationale de la Precontrainte (FIP) (1978), Shear at the Interface of Precast and In-situ Concrete, FIP, Lausanne, Switzerland.
  12. Hamadi, Y.D. and Regan, P.E. (1980), "Behaviour of normal and lightweight aggregate beams with shear cracks", Struct. Eng., 58B(4), 71-79.
  13. Jang, H.O., Lee, H.S., Cho, K. and Kim, J. (2018), "Numerical and experimental analysis of the shear behavior of ultrahigh-performance concrete construction joints", Adv. Mater. Sci. Eng., 2018, Article ID 6429767, 17. https://doi.org/10.1155/2018/6429767.
  14. JSCE, JSCE-g 553e1999 (2005), Test Method for Shear Strength of Steel Fiber Reinforced Concrete, Japan Society of Civil Engineers (JSCE) Japan.
  15. Kahn, L.F. and Mitchell, A.D. (2002), "Shear friction tests with high-strength concrete", ACI Struct. J., 99(1), 98-103.
  16. Lee, D.H., Hwang J.H., Ju, H. and Kim, K.S. (2014), "Application of direct tension force transfer model with modified fixed-angle softened-truss model to finite element analysis of steel fiber-reinforced concrete members subjected to shear", Comput. Concrete, 13(1), 49-70. https://doi.org/10.12989/cac.2014.13.1.049.
  17. Mansur, M.A., Vinayagam, T. and Tan, K.H. (2008), "Shear transfer across a crack in reinforced high-strength concrete", ASCE J. Mater. Civil Eng., 20(4), 294-302. https://doi.org/10.1061/(ASCE)0899-1561(2008)20:4(294).
  18. Martins, B.G. (2016), "Estudo dos mecanismos de transferência de tensoes de cisalhamento em concreto fissurado com e sem reforco de fibras de aco: uma analise exploratoria", Masters Dissertation, Federal University of Goias.
  19. Mast, R.F. (1968), "Auxiliary reinforcement in concrete connections", ASCE J. Struct. Div., 94(ST6), 1485-1504. https://doi.org/10.1061/JSDEAG.0001977
  20. Mattock, A.H. (1974), "Shear transfer in concrete having reinforcement at an angle to the shear plane", Special Publication, 42, 17-42.
  21. Nielsen, M.P. (1999), Limit Analysis and Concrete Plasticity, 2nd Edition, CRC, CRC Press, Boca Raton, FL.
  22. Patnaik, A.K. (2000), "Evaluation of ACI 318-95 shear-friction provisions. Discussion", ACI Struct. J., 97(3), 525-526.
  23. Pul, S., Ghaffari, A., Oztekin, E., Husem, M. and Demir, S. (2017), "Experimental determination of cohesion and internal friction angle on conventional concretes", ACI Mater. J., 114(3), 407-416.
  24. Rahal, K.N., Khaleefi, A.L. and Al-Sanee, A. (2016), "An experimental investigation of shear-transfer strength of normal and high strength self compacting concrete", Eng. Struct., 109, 16-25. https://doi.org/10.1016/j.engstruct.2015.11.015.
  25. Sagaseta, J. and Vollum, R.L. (2011), "Influence of aggregate fracture on shear transfer through cracks in reinforced concrete", Mag. Concrete Res., 63(2), 119-137. https://doi.org/10.1680/macr.9.00191.
  26. Santos, P.M.D. and Julio, E.N.B.S. (2012), "A state-of-the-art review on shear-friction", Eng. Struct., 45, 435-448. https://doi.org/10.1016/j.engstruct.2012.06.036.
  27. Soetens, T. and Matthys, S. (2017), "Shear-stress transfer across a crack in steel fibre-reinforced concrete", Cement Concrete Compos., 82, 1-13. https://doi.org/10.1016/j.cemconcomp.2017.05.010.
  28. Spinella, N. (2013), "Shear strength of full-scale steel fibre-reinforced concrete beams without stirrups", Comput. Concrete, 11(5), 365-382. http://dx.doi.org/10.12989/cac.2013.11.5.365.
  29. Sun, C., Xiao, J. and Lange, D.A. (2018), "Simulation study on the shear transfer behavior of recycled aggregate concrete", Struct. Concrete, 19, 255-268. https://doi.org/10.1002/suco.201600236.
  30. Swamy, R.N. and Andriopoulos, A.D. (1974), "Contribution of aggregate interlock and dowel forces to the shear resistance of reinforced beams with web reinforcement", Special Publication, 42, 129-168.
  31. Taylor, H.P.J. (1970), "Investigation of the forces carried across cracks in reinforced concrete beams in shear by interlock of aggregates", British Cement Association (formerly Cement and Concrete Association), London, U.K.
  32. TNO Building and Construction Research (2009), Diana User's Manual, Delft, Netherlands.
  33. Walraven, J.C. and Reinhardt, H.W. (1981), "Concrete mechanics. Part A: Theory and experiments on the mechanical behavior of cracks in plain and reinforced concrete subjected to shear loading", STIN, 82, 25417.
  34. Wu, P., Wu, C., Liu, Z. and Hao, H. (2019), "Investigation of shear performance of UHPC by direct shear tests", Eng. Struct., 183, 780-790. https://doi.org/10.1016/j.engstruct.2019.01.055.
  35. Xiao, J., Li, Z. and Li, J. (2014), "Shear transfer across a crack in high-strength concrete after elevated temperatures", Constr. Build. Mater., 71, 472-483. https://doi.org/10.1016/j.conbuildmat.2014.08.074.
  36. Xiao, J., Sun, C. and Lange, D.A. (2016), "Effect of joint interface conditions on shear transfer behavior of recycled aggregate concrete", Constr. Build. Mater., 105, 343-355. https://doi.org/10.1016/j.conbuildmat.2015.12.015.
  37. Xu, J., Wu, C., Li, Z.X. and Ng, C.T. (2015), "Numerical analysis of shear transfer across an initially uncrack reinforced concrete member", Eng. Struct., 102, 296-309. https://doi.org/10.1016/j.engstruct.2015.08.022.

피인용 문헌

  1. Elasto-Damage constitutive modelling of recycled aggregate concrete vol.28, pp.1, 2020, https://doi.org/10.12989/cac.2021.28.1.013