References
- Cho, J. Y., Go, S. H. and Kim, H. G., “Analysis of Drainage Efficiency of Different Type of Drainage using Computational Fluid Dynamic Method,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 34-43, 2017. https://doi.org/10.14775/ksmpe.2016.16.2.034
- Kim, H. J. and Lee, Y. M., “Experimental Study on Air Flow Characteristics of Axial Dual-blade Fan,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 13, No. 4, pp. 113-120, 2014. https://doi.org/10.14775/ksmpe.2014.13.4.113
- Lee, C. R. and Kim, B. H., "Flow Analysis of Cylindrical Helical Water Turbine for Micro Hydro-power", Journal of the Korean Society of Mechanical Technology, Vol. 20, No. 2, pp. 187-193, 2018. https://doi.org/10.17958/ksmt.20.2.201804.187
- Cho, J. U., "A Flow Analysis on Wing Shape of Cooling Fan at Automobile", Journal of the Korea Convergence Society, Vol. 5, No. 4, pp. 75-79, 2014. https://doi.org/10.15207/JKCS.2014.5.4.075
- Lee, D. H., Park, S. S., Ko, T. J. and Shim, J. S., “Effect of the Texture Shape Aspect Ratio on Friction Reduction in a Hydrodynamic Lubrication Regime,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 2, pp. 63-68, 2017.
- Cho, J. U., “Flow analysis of air due to the shapes of motorbike,” Journal of Korean Society of Mechanical Technology, Vol. 14, No. 1, pp. 53 60, 2012. https://doi.org/10.17958/ksmt.14.1.201202.53
- Cho, H. J., “Potential Flow Analysis around a Inlet Duct of a Water-jet Propulsion System,” Journal of the Korean Society of Mechanical Technology, Vol. 16, No. 1, pp. 1149-1154, 2014. https://doi.org/10.17958/ksmt.16.1.201402.1149
-
Jung, S. H., "The Control of Spring-Mass-Damper Convergence System using
$H{\infty}$ Controller and${\mu}$ -Synthesis Controller", Journal of the Korea Convergence Society, Vol. 8, No.5, pp. 1-11, 2017. https://doi.org/10.15207/JKCS.2017.8.5.001 - Suk, O. B. and Cho, J. U., "A Convergence Study through Flow Analysis due to the Configuration of Automotive Air Breather", Journal of the Korea Convergence Society, Vol. 9, No. 10, pp. 265-270, 2018. https://doi.org/10.15207/JKCS.2018.9.10.265
- Jun, C. W., Sohn, J. H. and Yang, M. S., “Comparison of Fluid Modeling Methods Based on SPH and ISPH for a Buoy Design for a Wave Energy Converter,” Journal of the Korean Society of Manufacturing Process Engineers, Vol. 16, No. 3, pp. 94-99, 2017.
Cited by
- PBF 방식 금속 3D프린터로 제작된 환경DNA 필터 케이스의 내부 형상이 포집 성능에 미치는 영향 vol.20, pp.8, 2020, https://doi.org/10.14775/ksmpe.2021.20.08.0074