한국안전학회지 (Journal of the Korean Society of Safety)

  • 제35권3호
  • /
  • Pages.58-63
  • /
  • 2020
  • /
  • 1738-3803(pISSN)
  • /
  • 2383-9953(eISSN)
한국안전학회 (The Korean Society of Safety)
권호 표지
DOI QR코드

DOI QR Code

항타 시공 작업자를 위한 비접촉식 관입량 측정기 개발

Development of Non-Contact Penetration Measuring Device for Pile Driving Workers

  • Kim, J.K. (SEED Tech.) ;
  • Kong, Y.K. (Department of Industrial Engineering, Sungkyunkwan University) ;
  • Choi, K.H. (Department of Industrial Engineering, Sungkyunkwan University) ;
  • Cho, M.U. (Department of Industrial Engineering, Sungkyunkwan University) ;
  • Kim, S.Y. (Department of Industrial Engineering, Sungkyunkwan University) ;
  • Kim, M.J. (Department of Industrial Engineering, Sungkyunkwan University) ;
  • Lee, J.H. (Planning Team, Sunil Industry) ;
  • Park, Chae Won (Department of Industrial Engineering, Sungkyunkwan University)
  • 투고 : 2020.03.06
  • 심사 : 2020.05.18
  • 발행 : 2020.06.30
PDF 다운로드
⟨ 이전 논문 다음 논문 ⟩

초록

At the construction site of the driving site, the pile rebound and penetration measurements are performed manually to determine the end point of the driving operation, thereby causing the measurer to be exposed to a death accident. In this study, in order to eliminate the risk of this work, a non-contact penetration measuring device was developed and usability evaluation was conducted. The penetration measuring device is manufactured based on the ultrasonic sensor, and can be combined with the pile to deliver the data in real time, and the delivered data can be output in real time on the portable PC and the final penetration can be calculated. Usability evaluation on the device was conducted by comparison with manual work. Usability evaluation was largely evaluated on measured values, subjective comfort, and body parts comfort. The result of the measured value tended to overestimate the value measured manually by the measuring device, which is similar to the previous research. In terms of subjective comfort and body part comfort, overall satisfaction was higher than the manual method when using the measuring device. Taken together, these results indicate that it is possible to use the rudder measuring device in place of manual work in the construction site, and it is judged that the worker's comfort is greatly increased by using the measuring machine. The results of this study suggest that the use of non-contact measuring device in the field can be used as basic data to support them.

키워드

참고문헌

  1. H. Kim, D. Kim, L. Lim, K. Park and I. Lee, "Resistance Factor and Target Reliability Index Calculation of Static Design Methods for Driven Steel Pipe Pile in Gwangyang", Journal of the Korea Academia-Industrial Cooperation Society, Vol. 16, No. 12, pp. 8128-8139, 2015. https://doi.org/10.5762/KAIS.2015.16.12.8128
  2. J. Park, Y. Park, B. Lee and S. Kim, "Assessment of Load and Resistance Factored Design Value for PHC Driven Pile", LHI Journal, Vol. 4, No. 3, pp. 279-286, 2013.
  3. M. Lim and I. Yun, "The Precise Measurement of Pile Rebound and Penetration Movement using a High-Speed Line Scan Camera for the Safe Foundation Work", Journal of Korean Society of Civil Engineering, Vol. 22, No. 6, pp. 1235-1245, 2002.
  4. M. H. Hussein, II, W. A. Woerner, M. Sharp, C. Hwang, "Pile Driveability and bearing Capacity in High-rebound Soils", Geotechnical Engineering in the Information Technology, pp. 1-4, 2006.
  5. J. Park, "A Comparative Study on the Bearing Capacity of Dynamic Load Test and Static Load Test of PHC Bored Pile", Journal of the Korean Geo-Environmental Society, Vol. 18, No. 9, pp. 19-31, 2017. https://doi.org/10.14481/jkges.2017.18.9.19
  6. G. S. Lee, S. G. Jung, T. H. Kim and S. Lee, "Analysis on Comparison of Pile Bearing Capacity in Dynamic and Static Loading Test", Proceedings of Korean Society of Civil Engineering, Vol. 2, pp. 207-210, 2000.
  7. H. S. Yun, J. W. Seok, D. J. Hwang and M. M. Kim, "Quality Control of Driven Piles Using DPRMs", Proceedings of Korean Society of Civil Engineering, pp. 3945-3948, 2005.
  8. H. Dekhn, "Engineering Properties of Pile Rebound Soils Based on Cone Penetration Testing (Doctoral Dissertation)", 2015.
  9. F. Jarushi, P. J. Cosentino, E. H. Kalajian, "Prediction of High Pile Rebound with Fines Content and Uncorrected Blow Counts from Standard Penetration Test", Transportation Research Record, Vol. 2363, No. 1, pp. 47-55, 2013. https://doi.org/10.3141/2363-06
  10. J. Park, "Safety Management Information System in Plants Construction Work", Journal of Korea Safety Management & Science, Vol. 14, No. 4, pp. 23-29, 2012. https://doi.org/10.12812/ksms.2012.14.4.023
  11. T. Park, Y. Park and T. Kim, "An analyzing Safety education contents propriety for Accident type in Construction work", Proceedings of the Korea Institute of Building Construction, Vol. 13, No. 2, pp. 94-95, 2013.
  12. I. S. Ha, S. S. Han, S. G. Han and M. M. Kim, "Measurement of Pile Rebound and Penetration using Laser Sensor", Proceedings of Korean Society of Civil Engineering, pp. 3257-3262, 2003.
  13. Y. Yeu, Y. S. Kim and D. Kim, "Development of Safe and Reliable Real-Time Remote Pile Penetration and Rebound Measurement System Using Close-Range Photogrammetry", International Journal of Civil Engineering, Vol. 14, No. 7, pp. 439-450, 2016. https://doi.org/10.1007/s40999-016-0053-y
  14. Ministry of Employment and Labor, "Measures to Reduce Industrial Accident Deaths", 2018.
  15. S. N. Lee, B. J. You, M. S. Limb, S. R. Oh, S. S. Han, S. H. Lee, "Visual Measurement of Pile Penetration and Rebound Movement using a High-speed Line-scan Camera", In Proceedings 2002 IEEE International Conference on Robotics and Automation, Vol. 4, pp. 4307-4312, 2002.
  16. M. S. Lim, B. J. You, S. R. Oh, S. S. Han and S. Hun-Lee, "Visual Precise Measurement of Pile Rebound and Penetration Movement Using a High-Speed Line-Scan Camera", Transaction on Control, Automation and Systems Engineering, Vol. 4, No. 4, pp. 341-346, 2002.
  17. Y. H. Kim and H.I. Cheng, "A Comparative Study on Body Pressure and Subjective Comfort by Different Types of Mattress", Journal of the Ergonomics Society of Korea, Vol. 37, Issue 1, pp. 75-82, 2018.
  18. J. S. Park, S. J. Lee and J. R. Kim, "Maximum Voluntary Contraction, Muscle Fatigue and Psychophysical Workload Measurement of the Shoulder in Sitting Position", Proceedings of the Ergonomics Society of Korea, pp. 62-67, 2008.
  19. J. Kim, J. Heo, S. Jung and S. Kim, "Path-planning using Modified Genetic Algorithm and SLAM based on Feature Map for Autonomous Vehicle", Journal of Korean Institute of Intelligent Systems, Vol. 19, No. 3, pp. 381-387, 2009. https://doi.org/10.5391/JKIIS.2009.19.3.381
  20. S. M. Ban and H. S. Kim, "Robust Speech Recognition Using Weighted Auto-Regressive Moving Average Filter", Phonetics and Speech Sciences, Vol. 2, No. 4, pp. 145-151, 2010.