Abstract
In the current paper, a series of advanced 3D finite element analyses have been performed on existing pieces of work of negative skin friction from a geotechnical centrifuge test and full-scale field measurements. From these analyses, key features of pile behaviour under the influence of negative skin friction which, previously, were not fully understood in existing studies, have been meticulously discussed. As such, it has been possible to successfully address several numerical modelling issues such as negative skin friction induced pile settlements and group effects (the shielding effect), the effect of sacrificial piles in groups and the interaction between the pile head and the cap, the effect of interface elements at the pile-soil interface and the time-dependent pile behaviour. During a geotechnical centrifuge test, substantial amounts of negative skin frictions were mobilised when centrifugal acceleration increased from 1g to a certain g-level due to an increase in the self-weight of soil. The behaviour of piles inside a group were heavily affected by the sacrificial piles and the connectivity between the pile head and the pile cap. In particular, as negative skin friction has time dependent qualities associated with consolidation, it was logical to perform coupled analyses when analysing piles in consolidating grounds. From the current work, several insufficiencies of previous researches have been addressed, and the engineering pile behaviour subjected to negative skin friction has been clarified.
본 연구에서는 말뚝에 작용하는 부마찰과 관련된 원심모형실험 및 실규모 현장실험 등 기발표 자료에 대한 고등3차원 유한요소해석을 수행하였다. 이를 통해 기존연구에서는 충분히 고려되지 못했던 부마찰이 작용하는 말뚝의 거동 특성을 상세히 분석하였다. 즉 수치해석을 통해 기존연구에서는 고려하지 못했던 부마찰에 의한 말뚝의 침하와 군효과, 군말뚝에서 희생말뚝의 영향과 말뚝두부와 기초판 사이의 상호거동, 말뚝-인접지반의 경계면 요소(interface element)의 유무 및 시간 의존적인 부마찰의 발생특성 등 다양한 요소들을 분석할 수 있었다. 원심모형실험의 경우 중력가속도가 1g에서 특정한 값으로 증가하는 경우 흙의 자중 증가로 인해 말뚝에 비교적 큰 부마찰이 발생하는 것을 확인하였다. 군말뚝의 경우 희생말뚝 유무 및 말뚝두부와 기초판과의 연결여부에 따라 말뚝의 거동이 크게 영향을 받는 것으로 나타났다. 특히 부마찰은 압밀과 관련된 시간의존적 특성을 가지므로 압밀이 진행 중인 말뚝의 거동을 분석할 경우 압밀을 고려한 해석을 수행하는 것이 합리적인 것으로 분석되었다. 이러한 일련의 고찰을 통하여 기존연구의 한계를 적절하게 보완하면서 부마찰을 받는 말뚝의 거동을 명확히 분석할 수 있었다.