DOI QR코드

DOI QR Code

Flexural performance of composite walls under out-of-plane loads

  • Sabouri-Ghomi, Saeid (Civil Engineering Department, K.N. Toosi University of Technology) ;
  • Nasri, Arman (Civil Engineering Department, K.N. Toosi University of Technology) ;
  • Jahani, Younes (Analysis and Advanced Materials for Structural Design (AMADE), Polytechnic School, University of Girona) ;
  • Bhowmick, Anjan K. (Department of Building, Civil and Environmental Engineering, Concordia University)
  • Received : 2019.08.13
  • Accepted : 2020.01.03
  • Published : 2020.02.25

Abstract

This paper presents a new structural system to use as retaining walls. In civil works, there is a general trend to use traditional reinforced concrete (RC) retaining walls to resist soil pressure. Despite their good resistance, RC retaining walls have some disadvantages such as need for huge temporary formworks, high dense reinforcing, low construction speed, etc. In the present work, a composite wall with only one steel plate (steel-concrete) is proposed to address the disadvantages of the RC walls. In the proposed system, steel plate is utilized not only as tensile reinforcement but also as a permanent formwork for the concrete. In order to evaluate the efficiency of the proposed SC composite system, an experimental program that includes nine SC composite wall specimens is developed. In this experimental study, the effects of different parameters such as distance between shear connectors, length of shear connectors, concrete ultimate strength, use of compressive steel plate and compressive steel reinforcement are investigated. In addition, a 3D finite element (FE) model for SC composite walls is proposed using the finite element program ABAQUS and load-displacement curves from FE analyses were compared against results obtained from physical testing. In all cases, the proposed FE model is reasonably accurate to predict the behavior of SC composite walls under out-of-plane loads. Results from experimental work and numerical study show that the SC composite wall system has high strength and ductile behavior under flexural loads. Furthermore, the design equations based on ACI code for calculating out-ofplate flexural and shear strength of SC composite walls are presented and compared to experimental database.

Keywords

References

  1. ACI 318-05 (2005), Building code requirements for structural concrete and commentary - ACI 318R-05, American concrete institute, Farming Hills, MI, USA.
  2. Ahmed, M., Hadi, K.M., Hasan, M.A., Mallick, J. and Ahmed, A. (2014), "Evaluating the co-relationship between concrete flexural tensile strength and compressive strength", Int. J. Struct. Eng., 5(2), 115-131. https://doi.org/10.1504/IJSTRUCTE.2014.060902
  3. AWS (2010), Structural Welding Code-Steel. American Welding Society (AWS), D1 Committee on Structural Welding.
  4. Cas, B., Bratina, S., Saje, M. and Planinc, I. (2004), "Non-linear analysis of composite steel-concrete beams with incomplete interaction", Steel Compos. Struct., 4(6), 489-507. https://doi.org/10.12989/scs.2004.4.6.489.
  5. Ding, F.X., Liu, J., Liu, X.M., Guo, F.Q. and Jiang, L.Z. (2016), "Flexural stiffness of steel-concrete composite beam under positive moment", Steel Compos. Struct., 20(6), 1369-1389. http://dx.doi.org/10.12989/scs.2016.20.6.1369.
  6. Dogan, O. and Roberts, T.M. (2010), "Comparing experimental deformations of steel-concrete-steel sandwich beams with full and partial interaction theories", Int. J. Phys. Sci., 5(10), 1544-1557.
  7. Epackachi, S., Nguyen, N.H., Kurt, E.G., Whittaker, A.S. and Varma, A.H. (2014), "In-plane seismic behavior of rectangular steel-plate composite wall piers", J. Struct. Eng., 141(7), 04014176. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001148.
  8. Eurocode 4 (2009), Design of composite steel and concrete structures-Part 2: General rules and rules for bridges. SoTN Bratislava.
  9. Fanaie, N., Esfahani, F.G. and Soroushnia, S. (2015), "Analytical study of composite beams with different arrangements of channel shear connectors", Steel Compos. Struct., 19(2), 485-501. http://dx.doi.org/10.12989/scs.2015.19.2.485.
  10. Hibbitt, D., Karlsson, B. and Sorenson, P. (2011), "Simulia ABAQUS 6.11 Users' Manual".
  11. Hognestad, E, Hanson, N.W. and McHenry, D. (1955), "Concrete stress distribution in ultimate strength design", J. Proceedings, 52(12), 455-480.
  12. Hossain, K.A. and Wright, H.D. (2004), "Experimental and theoretical behaviour of composite walling under in-plane shear", J Constr Steel Res., 60(1), 59-83. https://doi.org/10.1016/j.jcsr.2003.08.004.
  13. Huang, Z. and Liew, J.R. (2016), "Compressive resistance of steel-concrete-steel sandwich composite walls with J-hook connectors", J Constr Steel Res, 124, 142-162. https://doi.org/10.1016/j.jcsr.2016.05.001.
  14. Ji, X., Cheng, X., Jia, X. and Varma, A.H. (2017), "Cyclic inplane shear behavior of double-skin composite walls in highrise buildings", J Struct Eng, 143(6), 04017025. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001749.
  15. Kurt, E.G., Varma, A.H., Booth, P. and Whittaker, A.S. (2016), "In-plane behavior and design of rectangular SC wall piers without boundary elements", J Struct Eng, 142(6), 04016026. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001481.
  16. Liew, J.R. and Sohel, K.M. (2009), "Lightweight steel-concrete-steel sandwich system with J-hook connectors", Eng. Struct., 31(5), 1166-1178. https://doi.org/10.1016/j.engstruct.2009.01.013.
  17. Oduyemi, T.O. and Wright, H.D. (1989), "An experimental investigation into the behaviour of double-skin sandwich beams", J Constr Steel Res, 14(3), 197-220. https://doi.org/10.1016/0143-974X(89)90073-4.
  18. Prabha, P., Marimuthu, V., Saravanan, M., Palani, G.S., Lakshmanan, N. and Senthil, R. (2013), "Effect of confinement on steel-concrete composite light-weight load-bearing wall panels under compression", J Constr Steel Res., 81, 11-19. https://doi.org/10.1016/j.jcsr.2012.10.008.
  19. Qin, Y., Shu, G.P., Zhou, G.G. and Han, J.H. (2019), "Compressive behavior of double skin composite wall with different plate thicknesses", J. Constr. Steel Res., 157, 297-313. https://doi.org/10.1016/j.jcsr.2019.02.023.
  20. Ranzi, G. (2006), "Short-and long-term analyses of composite beams with partial interaction stiffened by a longitudinal plate", Steel Compos. Struct., 6(3), 237-255. https://doi.org/10.12989/scs.2006.6.3.237.
  21. Ranzi, G., Bradford, M.A. and Uy, B. (2003), "A general method of analysis of composite beams with partial interaction", Steel Compos. Struct., 3(3), 169-184. https://doi.org/10.12989/scs.2003.3.3.169.
  22. Sabouri-Ghomi, S., Jahani, Y. and Bhowmick, A.K. (2016), "Partial interaction theory to analyze composite (steel-concrete) shear wall systems under pure out-of-plane loadings", Thin Wall. Struct., 104, 211-224. https://doi.org/10.1016/j.tws.2016.03.013.
  23. Sener, K.C. and Varma, A.H. (2014), "Steel-plate composite walls: Experimental database and design for out-of-plane shear", J. Constr. Steel Res., 100, 197-210, https://doi.org/10.1016/j.jcsr.2014.04.014.
  24. Sener, K.C., Varma, A.H. and Ayhan, D. (2015), "Steel-plate composite (SC) walls: Out-of-plane flexural behavior, database, and design", J. Constr. Steel Res., 108, 46-59. https://doi.org/10.1016/j.jcsr.2015.02.002.
  25. Sener, K.C., Varma, A.H. and Seo, J. (2016), "Experimental and numerical investigation of the shear behavior of steel-plate composite (SC) beams without shear reinforcement", Eng. Struct., 127, 495-509, https://doi.org/10.1016/j.engstruct.2016.08.053.
  26. Seo, J., Varma, A.H., Sener, K. and Ayhan, D. (2016), "Steelplate composite (SC) walls: In-plane shear behavior, database, and design", J. Constr Steel Res., 119, 202-215. https://doi.org/10.1016/j.jcsr.2015.12.013.
  27. Sohel, K.M. and Liew, J.R. (2011), "Steel-Concrete-Steel sandwich slabs with lightweight core-Static performance", Eng Struct., 33(3), 981-992. https://doi.org/10.1016/j.engstruct.2010.12.019.
  28. Solomon, S.K., Smith, D.W. and Cusens, A.R. (1976), "Flexural tests of steel-concrete-steel sandwiches", Mag. Concrete Res., 28(94), 13-20. https://doi.org/10.1680/macr.1976.28.94.13.
  29. Turmo, J., Lozano-Galant, J.A., Mirambell, E. and Xu, D. (2015), "Modeling composite beams with partial interaction", J. Constr. Steel Res., 114, 380-393. https://doi.org/10.1016/j.jcsr.2015.07.007.
  30. Wright, H.D., Oduyemi, T.O. and Evans, H.R. (1991), "The design of double skin composite elements", J. Constr. Steel Res., 19(2), 111-132. https://doi.org/10.1016/0143-974X(91)90037-2.
  31. Xie, M., Foundoukos, N. and Chapman, J.C. (2007), "Static tests on steel-concrete-steel sandwich beams", J. Constr. Steel Res., 63(6), 735-750. https://doi.org/10.1016/j.jcsr.2006.08.001
  32. Yan, J.B., Liew, J.R. and Zhang, M.H. (2014), "Tensile resistance of J-hook connectors used in Steel-Concrete-Steel sandwich structure", J. Constr. Steel Res., 100, 146-162. https://doi.org/10.1016/j.jcsr.2014.04.023.
  33. Yan, J.B., Liew, J.R., Zhang, M.H. and Sohel, K.M. (2015), "Experimental and analytical study on ultimate strength behavior of steel-concrete-steel sandwich composite beam structures", Mater. Struct., 48(5), 1523-1544. https://doi.org/10.1617/s11527-014-0252-4.
  34. Yan, J.B., Wang, X.T. and Wang, T. (2018), "Compressive behaviour of normal weight concrete confined by the steel face plates in SCS sandwich wall", Constr. Build. Mater., 171, 437-454. https://doi.org/10.1016/j.conbuildmat.2018.03.143.
  35. Yang, Y., Liu, J. and Fan, J. (2016), "Buckling behavior of double-skin composite walls: An experimental and modeling study", J. Constr. Steel Res., 121, 126-135. https://doi.org/10.1016/j.jcsr.2016.01.019.
  36. Zhang, K., Varma, A.H., Malushte, S.R. and Gallocher, S., (2014), "Effect of shear connectors on local buckling and composite action in steel concrete composite walls", Nucl. Eng. Des., 269, 231-239. http://doi.org/10.1016/j.nucengdes.2013.08.035.
  37. Zhao, Q. and Astaneh-Asl, A. (2004), "Cyclic behavior of traditional and innovative composite shear walls", J. Struct. Eng., 130(2), 271-284. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(271).
  38. Zhao, W., Guo, Q., Huang, Z., Tan, L., Chen, J. and Ye, Y. (2016), "Hysteretic model for steel-concrete composite shear walls subjected to in-plane cyclic loading", Eng. Struct., 106, 461-470. https://doi.org/10.1016/j.engstruct.2015.10.031.

Cited by

  1. Behavior of L-shaped double-skin composite walls under compression and biaxial bending vol.37, pp.4, 2020, https://doi.org/10.12989/scs.2020.37.4.405
  2. Improved analytical formulation for Steel-Concrete (SC) composite walls under out-of-plane loads vol.38, pp.4, 2020, https://doi.org/10.12989/scs.2021.38.4.463